Neumeier, Steffen

2025

• Bezold A., Egan A., Völkl J., Karpstein N., Gaag T., Spiecker E., Göken M., Mills MJ., Neumeier S.:
  Localized phase transformation strengthening in CoNi-based superalloys
  In: Scripta Materialia 254 (2025), Art.Nr.: 116312
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2024.116312

2024

• Bandorf J., Kirzinger A., Zenk C., Pang HT., Rae CM., Stone HJ., Neumeier S.:
  On the Evolution of the γ/γ′ Lattice Misfit and TCP Phase Precipitation in a Highly Alloyed Single Crystalline Ni-Base Superalloy
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_7
• Bezold A., Vollhüter J., Karpstein N., Lenz M., Subramanyam AP., Zenk C., Hammerschmidt T., Spiecker E., Göken M., Neumeier S.:
  Segregation-induced strength anomalies in complex single-crystalline superalloys
  In: Communications Materials 5 (2024), Art.Nr.: 8
  ISSN: 2662-4443
  DOI: 10.1038/s43246-024-00447-x
• Gaag T., Weidinger J., Bandorf J., Lux V., Wahlmann B., Neumeier S., Zenk C., Körner C.:
  Experimental Validation of Property Models and Databases for Computational Superalloy Design
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202401051
• Haußmann L., Bresler J., Neumeier S., Pyczak F., Göken M.:
  Interdiffusion Coefficients and Strengthening Effects of Nb, Ta, and Zr in the α2-Ti3Al Phase
  In: Journal of Phase Equilibria and Diffusion (2024)
  ISSN: 1547-7037
  DOI: 10.1007/s11669-024-01105-y
• Haußmann L., Neumeier S., Hausmann A., Bergamaschi E., Göken M.:
  Combinatorial Materials Research for the Development of New Advanced CoNi-Base Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_8
• Karpstein N., Lenz M., Bezold A., Zehl R., Wu M., Ludwig A., Laplanche G., Neumeier S., Spiecker E.:
  Unambiguous Stacking Fault Analysis for Unraveling Shearing Mechanisms and Shear-Based Transformations in the L12-Ordered γ′ Phase
  15th International Symposium on Superalloys, ISS 2024 (Champion, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Proceedings of the 15th International Symposium on Superalloys 2024
  DOI: 10.1007/978-3-031-63937-1_4
• Karpstein N., Wu M., Bezold A., Neumeier S., Cormier J., Spiecker E.:
  Temperature and Time Dependence of Elemental Segregation at Stacking Faults in Ni- and Co-Base Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Champion, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_47
• Kirchmayer A., Hausmann A., Gabel S., Pröbstle M., Giese S., Göken M., Hünert D., Neumeier S.:
  The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 (2024), S. 803-811
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07286-4
• Kirchmayer A., Hausmann D., Gabel S., Pröbstle M., Giese S., Göken M., Hünert D., Neumeier S.:
  The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 (2024), S. 803-811
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07286-4
• Neumeier S., Freund L., Bezold A., Köbrich M., Vollhüter J., Hausmann D., Solis C., Stark A., Schell N., Pyczak F., Felfer P., Gilles R., Göken M.:
  Advanced Polycrystalline γ′-Strengthened CoNiCr-Based Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2024)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-024-07319-6
• Titz K., Vollhüter J., Randelzhofer P., Neumeier S., Göken M., Wahlmann B., Körner C.:
  Design and Characterization of a Novel NiAl–(Cr,Mo) Eutectic Alloy
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302079
• Tsankova S., Nagel O., Bezold A., Grandjean B., Kirchmayer A., Göken M., Neumeier S.:
  Exploring Microstructural Characteristics, Mechanical Behavior, Hydrogen Embrittlement, and Long-Term Stability of Polycrystalline CoNiCr-Based Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_30

2023

• Bezold A., Amon L., Karpstein N., Spiecker E., Göken M., Neumeier S.:
  Recovery of superlattice stacking faults at high temperatures
  In: Scripta Materialia 222 (2023), Art.Nr.: 115005
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2022.115005
• Bezold A., Neumeier S.:
  Tailoring deformation mechanisms in polycrystalline CoNi-base superalloys for enhanced high temperature strength
  In: Scripta Materialia 226 (2023), Art.Nr.: 115250
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2022.115250
• Fritton M., Kümmel F., Kirchmayer A., Stark A., Hafez Haghighat M., Gehrmann B., Neumeier S., Gilles R.:
  Investigation of the Hot Deformation Behavior in VDM® Alloy 780 by In Situ High-Energy X-Ray Diffraction
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06942-5
• Förner A., Vollhüter J., Krapf A., Jamjoom AFA., Hausmann D., Wahlmann B., Fu Z., Körner C., Neumeier S., Göken M.:
  Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites
  In: Advanced Engineering Materials (2023)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202300407
• Hagen S., Haußmann L., Wahlmann B., Gebhardt F., Abu-Khousa B., Weiser M., Neumeier S., Zenk C., Virtanen S.:
  Influence of the W and Ta content on the High-Temperature Oxidation Resistance of Multinary Co/Ni-Based Superalloys at 1050 °C and 1150 °C
  In: High Temperature Corrosion of Materials (2023)
  ISSN: 2731-8397
  DOI: 10.1007/s11085-023-10183-1
• Karpstein N., Lenz M., Bezold A., Wu M., Neumeier S., Spiecker E.:
  Reliable identification of the complex or superlattice nature of intrinsic and extrinsic stacking faults in the L12 phase by high-resolution imaging
  In: Acta Materialia 260 (2023), Art.Nr.: 119284
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2023.119284
• Kirchmayer A., Pröbstle M., Huenert D., Neumeier S., Göken M.:
  Influence of Grain Size and Volume Fraction of η/δ Precipitates on the Dwell Fatigue Crack Propagation Rate and Creep Resistance of the Nickel-Base Superalloy ATI 718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07001-3
• Kirchmayer A., Weiser M., Randelzhofer P., Freund L., Gehrmann B., Haghighat MH., Huenert D., Göken M., Neumeier S.:
  Oxidation Behavior of the Polycrystalline Ni-Base Superalloy VDM® Alloy 780
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06956-z
• Köbrich M., Förner A., Volz N., Zenk C., Fries SG., Göken M., Neumeier S.:
  Influence of refractory and platinum group metals on the microstructure and thermo-physical properties of Co-Al-W-based superalloys
  In: Journal of Alloys and Compounds 947 (2023), Art.Nr.: 169542
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2023.169542
• Morales LA., Bezold A., Förner A., Holz H., Merle B., Neumeier S., Körner C., Zenk C.:
  Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe-Based alpha/alpha '/alpha '' Superalloy
  In: Advanced Engineering Materials (2023)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202201652
• Palm MS., Diepold B., Neumeier S., Höppel HW., Göken M., Zaeh MF.:
  Detection and effects of lack of fusion defects in Hastelloy X manufactured by laser powder bed fusion
  In: Materials & Design 230 (2023), Art.Nr.: 111941
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2023.111941
• Pyczak F., Liang Z., Neumeier S., Rao Z.:
  Stability and Physical Properties of the L1(2)-gamma ' Phase in the CoNiAlTi-System
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06949-y
• Vollhüter J., Bezold A., Karpstein N., Köbrich M., Spiecker E., Göken M., Neumeier S.:
  Strain Rate-Dependent Anomalous Work Hardening of a Single-Crystalline CoNi-Base Superalloy
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-06966-5
• Xue F., Bezold A., Volz N., Kirchmayer A., Zenk C., Neumeier S., Göken M.:
  Influence of the γ′ Volume Fraction on the High-Temperature Strength of Single Crystalline Co–Al–W–Ta Superalloys
  In: Crystals 13 (2023), Art.Nr.: 1095
  ISSN: 2073-4352
  DOI: 10.3390/cryst13071095

2022

• Bezold A., Freund L., Förner A., Völkl J., Huber LK., Göken M., Neumeier S.:
  Deformation Mechanisms in Compositionally Complex Polycrystalline CoNi-Base Superalloys: Influence of Temperature, Strain-Rate and Chemistry
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06912-x
• Bezold A., Stone HJ., Rae CMF., Neumeier S.:
  In Situ Investigation of TCP Phase Formation, Stress Relaxation and gamma/gamma ' Lattice Misfit Evolution in Fourth Generation Single Crystal Ni-Base Superalloys by X-Ray High Temperature Diffraction
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06713-2
• Bezold A., Volz N., Lenz M., Karpstein N., Zenk C., Spiecker E., Göken M., Neumeier S.:
  Quantification of the temperature-dependent evolution of defect structures in a CoNi-base superalloy
  In: Acta Materialia 227 (2022), Art.Nr.: 117702
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.117702
• Bezold A., Volz N., Xue F., Neumeier S., Göken M.:
  Anomalous Work Hardening Behavior of a Single Crystalline Co-Base Superalloy
  In: Alloys 1 (2022), S. 243-253-253
  ISSN: 2674-063X
  DOI: 10.3390/alloys1030015
• Gabel S., Giese S., Webler R., Neumeier S., Göken M.:
  Microcantilever Fracture Tests of α-Cr Containing NiAl Bond Coats
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101429
• Hausmann D., Freund L., Solis C., Giese S., Göken M., Gilles R., Neumeier S.:
  Cracking during High-Temperature Deformation of a High-Strength Polycrystalline CoNi-Base Superalloy
  In: Metals 12 (2022)
  ISSN: 2075-4701
  DOI: 10.3390/met12091520
• Haußmann L., Burbaum B., Stoehr B., Förner A., Freund L., Göken M., Neumeier S.:
  Crack-Free Welding of a Co-Base Superalloy with High γ' Precipitate Fraction
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202200609
• Haußmann L., Neumeier S., Bresler J., Keim S., Pyczak F., Göken M.:
  Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys
  In: Metals 12 (2022), Art.Nr.: 752
  ISSN: 2075-4701
  DOI: 10.3390/met12050752
• Haußmann L., Yoo B., Jung C., Ryou K., Choi WS., Haußmann L., Yang S., Boll T., Neumeier S., Choi PP.:
  Directed energy deposition of γ/γ' Co-Al-W superalloys
  In: Additive Manufacturing 60C7 - 103287 (2022)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2022.103287
• Liang Z., Neumeier S., Rao Z., Göken M., Pyczak F.:
  CALPHAD informed design of multicomponent CoNiCr-based superalloys exhibiting large lattice misfit and high yield stress
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 854 (2022), Art.Nr.: 143798
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2022.143798
• Liang Z., Paul JDH., Stark A., Bezold A., Neumeier S., Göken M., Pyczak F.:
  High-Temperature CoNi-Based Superalloys Strengthened by γ′-(Ni,Co)3(Cr,Al,Ti,X): The Effect of Refractory Elements
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06795-y
• Luo N., Huber F., Ciftci N., Wahl L., Bezold A., Neumeier S., Uhlenwinkel V., Travitzky N., Schmidt M., Zenk C., Körner C.:
  Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 (2022), Art.Nr.: 143405
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2022.143405
• Schimmel S., Salamon M., Tomida D., Neumeier S., Ishiguro T., Honda Y., Chichibu SF., Amano H.:
  High-Energy Computed Tomography as a Prospective Tool for In Situ Monitoring of Mass Transfer Processes inside High-Pressure Reactors-A Case Study on Ammonothermal Bulk Crystal Growth of Nitrides including GaN
  In: Materials 15 (2022), S. 6165
  ISSN: 1996-1944
  DOI: 10.3390/ma15176165
• Solís C., Kirchmayer A., da Silva I., Kümmel F., Mühlbauer S., Beran P., Gehrmann B., Haghighat MH., Neumeier S., Gilles R.:
  Monitoring the precipitation of the hardening phase in the new VDM® Alloy 780 by in-situ high-temperature small-angle neutron scattering, neutron diffraction and complementary microscopy techniques
  In: Journal of Alloys and Compounds 928 (2022), Art.Nr.: 167203
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2022.167203
• Thompson Y., Zissel K., Förner A., Gonzalez-Gutierrez J., Kukla C., Neumeier S., Felfer P.:
  Metal fused filament fabrication of the nickel-base superalloy IN 718
  In: Journal of Materials Science (2022)
  ISSN: 0022-2461
  DOI: 10.1007/s10853-022-06937-y
• Wahlmann B., Bandorf J., Volz N., Förner A., Pröbstle J., Multerer K., Göken M., Markl M., Neumeier S., Körner C.:
  Numerical Design of CoNi-Base Superalloys With Improved Casting Structure
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06870-4
• Webler R., Baranova P., Karewar S., Möller J., Neumeier S., Göken M., Bitzek E.:
  On the influence of Al-concentration on the fracture toughness of NiAl: Microcantilever fracture tests and atomistic simulations
  In: Acta Materialia 234 (2022), Art.Nr.: 117996
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.117996
• Yoo B., Jung C., Ryou K., Choi WS., Haußmann L., Yang S., Boll T., Neumeier S., Choi PP.:
  Directed energy deposition of gamma/gamma' Co-Al-W superalloys
  In: Additive Manufacturing 60 (2022)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2022.103287

2021

• Bezold A., Volz N., Lenz M., Zenk C., Spiecker E., Mills MJ., Göken M., Neumeier S.:
  Yielding behavior of a single-crystalline γ'-strengthened Co-Ti-Cr superalloy
  In: Scripta Materialia 200 (2021), S. 113928
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2021.113928
• Diepold B., Neumeier S., Meermeier A., Höppel HW., Sebald T., Göken M.:
  Temperature-Dependent Dynamic Strain Aging in Selective Laser Melted 316L
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202001501
• Diepold B., Palm MS., Wimmer A., Sebald T., Höppel HW., Neumeier S., Göken M.:
  Rotating Scan Strategy Induced Anisotropic Microstructural and Mechanical Behavior of Selective Laser Melted Materials and Their Reduction by Heat Treatments
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100622
• Förner A., Vollhüter J., Hausmann D., Arnold C., Felfer P., Neumeier S., Göken M.:
  Nanostructuring of Nb-Si-Cr Alloys by Electron Beam Melting to Improve the Mechanical Properties and the Oxidation Behavior
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-021-06516-x
• Gaag T., Ritter N., Peters A., Volz N., Gruber D., Neumeier S., Zenk C., Körner C.:
  Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys
  In: Metals 11 (2021), Art.Nr.: 1707
  ISSN: 2075-4701
  DOI: 10.3390/met11111707
• Gabel S., Giese S., Merle B., Sprenger I., Heilmaier M., Neumeier S., Bitzek E., Göken M.:
  Microcantilever Fracture Tests on Eutectic NiAl–Cr(Mo) In Situ Composites
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202001464
  URL: https://onlinelibrary.wiley.com/doi/epdf/10.1002/adem.202001464
• Hausmann D., Förner A., Pröbstle M., Huenert D., Felfer P., Göken M., Neumeier S.:
  Correlation Between Local Chemical Composition and Formation of Different Types of Ordered Phases in the Polycrystalline Nickel-Base Superalloy A718Plus
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100558
• Haußmann L., Rehman HU., Matschkal D., Göken M., Neumeier S.:
  Solid solution strengthening of Mo, Re, Ta and W in Ni during high-temperature creep
  In: Metals 11 (2021), Art.Nr.: 1909
  ISSN: 2075-4701
  DOI: 10.3390/met11121909
• Kümmel F., Kirchmayer A., Solís C., Hofmann M., Neumeier S., Gilles R.:
  Deformation mechanisms in Ni-based superalloys at room and elevated temperatures studied by in Situ neutron diffraction and electron microscopy
  In: Metals 11 (2021), Art.Nr.: 719
  ISSN: 2075-4701
  DOI: 10.3390/met11050719
• Liang Z., Göken M., Lorenz U., Neumeier S., Oehring M., Pyczak F., Stark A., Wang L.:
  Influence of small amounts of Si and Cr on the high temperature oxidation behavior of novel cobalt base superalloys
  In: Corrosion Science 184 (2021), Art.Nr.: 109388
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2021.109388
• Liang Z., Pyczak F., Stark A., Rao Z., Neumeier S., Göken M.:
  Breaking the continuity of the Al2O3 oxide scale by additions of Cr in Co-Al-W-based superalloys
  In: Corrosion Science 189 (2021), Art.Nr.: 109594
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2021.109594
• Morgado FF., Katnagallu S., Freysoldt C., Klaes B., Vurpillot F., Neugebauer J., Raabe D., Neumeier S., Gault B., Stephenson LT.:
  Corrigendum to Revealing atomic-scale vacancy-solute interaction in nickel(Scripta Materialia (2021) 203, (114036) (S135964622100316X), (10.1016/j.scriptamat.2021.114036))
  In: Scripta Materialia 205 (2021), Art.Nr.: 114213
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2021.114213
• Morgado FF., Katnagallu S., Freysoldt C., Klaes B., Vurpillot F., Neugebauer J., Raabe D., Neumeier S., Gault B., Stephenson LT.:
  Revealing atomic-scale vacancy-solute interaction in nickel
  In: Scripta Materialia 203 (2021), Art.Nr.: 114036
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2021.114036
• Neumeier S., Bresler J., Zenk C., Haußmann L., Stark A., Pyczak F., Göken M.:
  Partitioning Behavior of Nb, Ta, and Zr in Fully Lamellar gamma/alpha(2) Titanium Aluminides and Its Effect on the Lattice Misfit and Creep Behavior
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100156
• Neumeier S., Pyczak F., Göken M.:
  The temperature dependent lattice misfit of rhenium and ruthenium containing nickel-base superalloys – Experiment and modelling
  In: Materials and Design 198 (2021), Art.Nr.: 109362
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2020.109362
• Volz N., Xue F., Bezold A., Zenk C., Fries SG., Schreuer J., Neumeier S., Göken M.:
  Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-021-06353-y
• Volz N., Xue F., Zenk C., Bezold A., Gabel S., Subramanyam AP., Drautz R., Hammerschmidt T., Makineni SK., Gault B., Göken M., Neumeier S.:
  Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy
  In: Acta Materialia 214 (2021), S. 117019
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2021.117019
• Volz N., Zenk C., Karpstein N., Lenz M., Spiecker E., Göken M., Neumeier S.:
  Creep properties and deformation mechanisms of single-crystalline gamma '-strengthened superalloys in dependence of the Co/Ni ratio
  In: Philosophical Magazine (2021)
  ISSN: 1478-6435
  DOI: 10.1080/14786435.2021.2017051

2020

• Bezold A., Volz N., Xue F., Zenk CH., Neumeier S., Göken M.:
  On the Precipitation-Strengthening Contribution of the Ta-Containing Co3(Al,W)-Phase to the Creep Properties of γ/γ′ Cobalt-Base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 51 (2020), S. 1567-1574
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-05626-2
• Diepold B., Vorlaufer N., Neumeier S., Gartner T., Göken M.:
  Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718
  In: International Journal of Minerals, Metallurgy and Materials 27 (2020), S. 640-648
  ISSN: 1674-4799
  DOI: 10.1007/s12613-020-1991-6
• Förner A., Giese S., Arnold C., Felfer P., Körner C., Neumeier S., Göken M.:
  Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting
  In: Scientific Reports 10 (2020), Art.Nr.: 15153
  ISSN: 2045-2322
  DOI: 10.1038/s41598-020-72093-5
• Giese S., Bezold A., Pröbstle M., Heckl A., Neumeier S., Göken M.:
  The Importance of Diffusivity and Partitioning Behavior of Solid Solution Strengthening Elements for the High Temperature Creep Strength of Ni-Base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-06028-0
• Hausmann D., Solís C., Freund L., Volz N., Heinemann A., Göken M., Gilles R., Neumeier S.:
  Enhancing the high-temperature strength of a Co-base superalloy by optimizing the γ/γ' microstructure
  In: Metals 10 (2020), Art.Nr.: 321
  ISSN: 2075-4701
  DOI: 10.3390/met10030321
• Haußmann L., Neumeier S., Kolb M., Ast J., Mohanty G., Michler J., Göken M.:
  Local Mechanical Properties at the Dendrite Scale of Ni-Based Superalloys Studied by Advanced High Temperature Indentation Creep and Micropillar Compression Tests
  14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA, 12. September 2021 - 16. September 2021)
  In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (Hrsg.): Minerals, Metals and Materials Series 2020
  DOI: 10.1007/978-3-030-51834-9_26
• He J., Zenk C., Zhou X., Neumeier S., Raabe D., Gault B., Makineni SK.:
  On the atomic solute diffusional mechanisms during compressive creep deformation of a Co-Al-W-Ta single crystal superalloy
  In: Acta Materialia 184 (2020), S. 86-99
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.11.035
• Kirchmayer A., Lyu H., Pröbstle M., Houlle F., Förner A., Huenert D., Göken M., Felfer P., Bitzek E., Neumeier S.:
  Combining Experiments and Atom Probe Tomography-Informed Simulations on γ′ Precipitation Strengthening in the Polycrystalline Ni-Base Superalloy A718Plus
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000149
• Kubacka D., Eggeler Y., Volz N., Neumeier S., Spiecker E.:
  Using Rapid Thermal Annealing for Studying Early Stages of High-Temperature Oxidation of Superalloys
  DOI: 10.1007/978-3-030-51834-9_74
• Lenz M., Wu M., He J., Makineni SK., Gault B., Raabe D., Neumeier S., Spiecker E.:
  Atomic Structure and Chemical Composition of Planar Fault Structures in Co-Base Superalloys
  14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA, 12. September 2021 - 16. September 2021)
  In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (Hrsg.): Minerals, Metals and Materials Series 2020
  DOI: 10.1007/978-3-030-51834-9_90
• Volz N., Zenk C., Halvaci T., Matuszewska K., Neumeier S., Göken M.:
  Castability and Recrystallization Behavior of γ′-Strengthened Co-Base Superalloys
  DOI: 10.1007/978-3-030-51834-9_88
• Xue F., Zenk C., Freund L., Neumeier S., Göken M.:
  Understanding raft formation and precipitate shearing during double minimum creep in a γ′-strengthened single crystalline Co-base superalloy
  In: Philosophical Magazine (2020)
  ISSN: 1478-6443
  DOI: 10.1080/14786435.2020.1836415
• Zenk C., Volz N., Bezold A., Huber LK., Eggeler Y., Spiecker E., Göken M., Neumeier S.:
  The Effect of Alloying on the Thermophysical and Mechanical Properties of Co–Ti–Cr-Based Superalloys
  DOI: 10.1007/978-3-030-51834-9_89
• Zenk C., Volz N., Zenk C., Felfer P., Neumeier S.:
  Impact of the Co/Ni-Ratio on Microstructure, Thermophysical Properties and Creep Performance of Multi-Component γ′-Strengthened Superalloys
  In: Crystals 10 (2020), S. 1058
  ISSN: 2073-4352
  DOI: 10.3390/cryst10111058
• Zomorodpoosh S., Volz N., Neumeier S., Roslyakova I.:
  Application of change-point analysis to the selection of representative data in creep experiments
  In: Journal of Physics Communications 4 (2020), S. 1-11
  ISSN: 2399-6528
  DOI: 10.1088/2399-6528/aba7ff

2019

• Bresler J., Neumeier S., Ziener M., Pyczak F., Göken M.:
  The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar gamma/alpha(2) titanium aluminides
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 (2019), S. 46-53
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.11.152
• Bresler J., Neumeier S., Ziener M., Pyczak F., Göken M.:
  The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 (2019), S. 46-53
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.11.152
• Giese S., Kern F., Macauley C., Neumeier S., Göken M.:
  Fracture resistance of yttria stabilized zirconia manufactured from stabilizer-coated nanopowder by micro cantilever bending tests
  In: Journal of the European Ceramic Society (2019)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2019.05.006
• Giese S., Neumeier S., Amberger-Matschkal D., Bergholz J., Vaßen R., Göken M.:
  Microtensile creep testing of freestanding MCrAlY bond coats
  In: Journal of Materials Research (2019)
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.169
• Giese S., Neumeier S., Bergholz J., Naumenko D., Quadakkers WJ., Vassen R., Göken M.:
  Influence of Different Annealing Atmospheres on the Mechanical Properties of Freestanding MCrAlY Bond Coats Investigated by Micro-Tensile Creep Tests
  In: Metals 9 (2019)
  ISSN: 2075-4701
  DOI: 10.3390/met9060692
• Katnagallu S., Stephenson LT., Mouton I., Freysoldt C., Subramanyam APA., Jenke J., Ladines AN., Neumeier S., Hammerschmidt T., Drautz R., Neugebauer J., Vurpillot F., Raabe D., Gault B.:
  Imaging individual solute atoms at crystalline imperfections in metals
  In: New Journal of Physics 21 (2019)
  ISSN: 1367-2630
  DOI: 10.1088/1367-2630/ab5cc4
• Lenz M., Eggeler Y., Müller J., Zenk C., Volz N., Wollgramm P., Eggeler G., Neumeier S., Göken M., Spiecker E.:
  Tension/Compression asymmetry of a creep deformed single crystal Co-base superalloy
  In: Acta Materialia 166 (2019), S. 597-610
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.12.053
• Matschkal D., Kolb M., Neumeier S., Gao S., Hartmaier A., Durst K., Göken M.:
  New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures
  In: Materials & Design 183 (2019), Art.Nr.: 108090
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2019.108090
• Weiser M., Galetz MC., Zschau HE., Zenk C., Neumeier S., Göken M., Virtanen S.:
  Influence of Co to Ni ratio in γ′-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C
  In: Corrosion Science (2019)
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2019.05.007
• Zenk C., Gibson JS., Maier-Kiener V., Neumeier S., Göken M., Korte-Kerzel S.:
  Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements
  In: Acta Materialia 181 (2019), S. 385-398
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.09.008

2018

• Carton-Cordero M., Campos M., Freund L., Kolb M., Neumeier S., Göken M., Torralba JM.:
  Microstructure and compression strength of Co-based superalloys hardened by γ′ and carbide precipitation
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 734 (2018), S. 437-444
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.08.007
• Cormier J., Rae C., Neumeier S., Hardy M., Reed R.:
  Superalloys and Their Applications Foreword
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), S. 3763-3763
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4803-0
  (anderer)
• Freund L., Stark A., Kirchmayer A., Schell N., Pyczak F., Göken M., Neumeier S.:
  The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), S. 4070-4078
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4757-2
• Freund L., Stark A., Pyczak F., Schell N., Göken M., Neumeier S.:
  The grain boundary pinning effect of the mu phase in an advanced polycrystalline γ/γ′ Co-base superalloy
  In: Journal of Alloys and Compounds 753 (2018), S. 333-342
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2018.04.204
• Freund L., Stark A., Pyczak F., Schell N., Göken M., Neumeier S.:
  The grain boundary pinning effect of the μ phase in an advanced polycrystalline γ/γ′ Co-base superalloy
  In: Journal of Alloys and Compounds 753 (2018), S. 333-342
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2018.04.204
• Kimmel AC., Malkowski TF., Griffiths S., Hertweck B., Steigerwald T., Freund L., Neumeier S., Göken M., Speck JS., Schlücker E.:
  High-temperature corrosion of Inconel (R) Alloy 718, Haynes (R) 282 (R) Alloy and CoWAlloy1&2 in supercritical ammonia/ammonium chloride solutio
  In: Journal of Crystal Growth 498 (2018), S. 289-300
  ISSN: 0022-0248
  DOI: 10.1016/j.jcrysgro.2018.06.018
• Kolb M., Freund L., Fischer F., Povstugar I., Makineni SK., Gault B., Raabe D., Müller J., Spiecker E., Neumeier S., Göken M.:
  On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys
  In: Acta Materialia (2018), S. 247-254
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.12.020
• Makineni SK., Kumar A., Lenz M., Kontis P., Meiners T., Zenk C., Zaefferer S., Eggeler G., Neumeier S., Spiecker E., Raabe D., Gault B.:
  On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal CoNi-based superalloy
  In: Acta Materialia (2018), S. 362-371
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.05.074
• Makineni SK., Lenz M., Kontis P., Li Z., Kumar A., Felfer P., Neumeier S., Herbig M., Spiecker E., Raabe D., Gault B.:
  Correlative Microscopy-Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys
  In: JOM Journal of the Minerals, Metals and Materials Society 70 (2018), S. 1736-1743
  ISSN: 1047-4838
  DOI: 10.1007/s11837-018-2802-7
• Makineni SK., Lenz M., Kontis P., Li Z., Kumar A., Felfer P., Neumeier S., Herbig M., Spiecker E., Raabe D., Gault B.:
  Correlative Microscopy—Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys
  In: JOM Journal of the Minerals, Metals and Materials Society (2018), S. 1-8
  ISSN: 1047-4838
  DOI: 10.1007/s11837-018-2802-7
• Makineni SK., Lenz M., Neumeier S., Spiecker E., Raabe D., Gault B.:
  Elemental segregation to antiphase boundaries in a crept CoNi-based single crystal superalloy
  In: Scripta Materialia (2018), S. 62-66
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2018.07.042
• Volz N., Zenk C., Cherukuri R., Kalfhaus T., Weiser M., Makineni SK., Betzing C., Lenz M., Gault B., Fries SG., Schreuer J., Vassen R., Virtanen S., Raabe D., Spiecker E., Neumeier S., Göken M.:
  Thermophysical and Mechanical Properties of Advanced Single Crystalline Co-base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2018), S. 1-11
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4705-1
• Xue F., Zenk C., Freund L., Hoelzel M., Neumeier S., Göken M.:
  Double minimum creep in the rafting regime of a single-crystal Co-base superalloy
  In: Scripta Materialia 142 (2018), S. 129-132
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2017.08.039

2017

• Freund L., Giese S., Schwimmer D., Höppel HW., Neumeier S., Göken M.:
  High temperature properties and fatigue strength of novel wrought gamma/gamma' Co-base superalloys
  In: Journal of Materials Research 32 (2017), S. 4475-4482
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.315
• Freund L., Messe OMDM., Barnard JS., Göken M., Neumeier S., Rae CMF.:
  Segregation assisted microtwinning during creep of a polycrystalline L1(2)-hardened Co-base superalloy
  In: Acta Materialia 123 (2017), S. 295-304
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.10.048
• Iqbal F., Pyczak F., Neumeier S., Göken M.:
  Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 689 (2017), S. 11-16
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2017.02.017
• Kolb M., Zenk C., Kirzinger A., Povstugar I., Raabe D., Neumeier S., Göken M.:
  Influence of rhenium on γ′-strengthened cobalt-base superalloys
  In: Journal of Materials Research 32 (2017), S. 2551-2559
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.242
• Rehman HU., Burst K., Neumeier S., Sato A., Reed R., Göken M.:
  On the temperature dependent strengthening of nickel by transition metal solutes
  In: Acta Materialia 137 (2017), S. 54-63
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.05.038
• Zenk C., Povstugar I., Li R., Rinaldi F., Neumeier S., Raabe D., Göken M.:
  A novel type of Co-Ti-Cr-base γ/γ′ superalloys with low mass density
  In: Acta Materialia 135 (2017), S. 244-251
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.06.024
• Zietara M., Neumeier S., Göken M., Czyrska-Filemonowicz A.:
  Characterization of γ and γ′ Phases in 2nd and 4th Generation Single Crystal Nickel-Base Superalloys
  In: Metals and Materials International 23 (2017), S. 126-131
  ISSN: 1598-9623
  DOI: 10.1007/s12540-017-6109-y

2016

• Brenne F., Taube A., Pröbstle M., Neumeier S., Schwarze D., Schaper M., Niendorf T.:
  Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting
  In: Progress in Additive Manufacturing 1 (2016), S. 141 - 151
  ISSN: 2363-9512
  DOI: 10.1007/s40964-016-0013-8
• Cartón-Cordero M., Campos M., Freund L., Kolb M., Neumeier S., Göken M., Torralba JM.:
  Mechanical behaviour of novel sintered Co-Al-W alloys at high temperatures
  World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85035325510∨igin=inward
• Hammerschmidt T., Koßmann J., Zenk C., Neumeier S., Göken M., Lopez-Galilea I., Mujica Roncery L., Huth S., Kostka A., Theisen W., Drautz R.:
  The role of local chemical composition for TCP phase precipitation in Ni-base and Co-base superalloys
  13th International Symposium on Superalloys, SUPERALLOYS 2016
  DOI: 10.1002/9781119075646.ch10
• Huenert D., Pröbstle M., Casanova A., Schlütter R., Krakow R., Büscher M., Randelzhofer P., Evans A., Löhnert K., Witulski T., Neumeier S., Rae CMF.:
  ATI718PLUS® - New nickel based disc alloy and its capability
  13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs, 11. September 2016 - 15. September 2016)
  In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (Hrsg.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016
  DOI: 10.1002/9781119075646.ch84
• Kolb M., Wheeler JM., Mathur HN., Neumeier S., Korte-Kerzel S., Pyczak F., Michler J., Göken M.:
  Local mechanical properties of the (β0+ω0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperatures
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 665 (2016), S. 135-140
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2016.04.026
• Neumeier S., Rehman HU., Neuner J., Zenk C., Michel S., Schuwalow S., Rogal J., Drautz R., Göken M.:
  Diffusion of solutes in fcc Cobalt investigated by diffusion couples and first principles kinetic Monte Carlo
  In: Acta Materialia 106 (2016), S. 304-312
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.01.028
• Povstugar I., Zenk C., Li R., Choi P-., Neumeier S., Dolotko O., Hoelzel M., Göken M., Raabe D.:
  Elemental partitioning, lattice misfit and creep behaviour of Cr containing γ′ strengthened Co base superalloys
  In: Materials Science and Technology 32 (2016), S. 220-225
  ISSN: 0267-0836
  DOI: 10.1179/1743284715Y.0000000112
• Pröbstle M., Neumeier S., Feldner P., Rettig R., Helmer H., Singer R., Göken M.:
  Improved creep strength of nickel-base superalloys by optimized γ/γ′ partitioning behavior of solid solution strengthening elements
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 (2016), S. 411-420
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2016.08.121
• Pröbstle M., Neumeier S., Hopfenmüller J., Freund L., Niendorf T., Schwarze D., Göken M.:
  Superior creep strength of a nickel-based super alloy produced by selective laser melting
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 674 (2016), S. 299-307
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2016.07.061
• Zenk C., Bauer A., Goik P., Neumeier S., Stone HJ., Göken M.:
  Microstructure, Lattice Misfit, and High-Temperature Strength of γ′-Strengthened Co-Al-W-Ge Model Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 (2016), S. 2141-2149
  ISSN: 1073-5623
  DOI: 10.1007/s11661-016-3408-8
• Zenk C., Neumeier S., Engl N., Fries SG., Dolotko O., Weiser M., Virtanen S., Göken M.:
  Intermediate Co/Ni-base model superalloys - Thermophysical properties, creep and oxidation
  In: Scripta Materialia 112 (2016), S. 83-86
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2015.09.018
• Zenk C., Neumeier S., Kolb M., Volz N., Fries SG., Dolotko O., Povstugar I., Raabe D., Göken M.:
  The role of the base element in γ′ strengthened cobalt/nickel-base superalloys
  13th International Symposium on Superalloys, SUPERALLOYS 2016
  DOI: 10.1002/9781119075646.ch103

2015

• Bauer A., Neumeier S., Pyczak F., Göken M.:
  Influence of iridium on the properties of γ′-strengthened co-base superalloys
  In: Advanced Engineering Materials 17 (2015), S. 748-754
  ISSN: 1438-1656
  DOI: 10.1002/adem.201400266
• Bhowmik A., Neumeier S., Rhode S., Stone HJ.:
  Allotropic transformation induced stacking faults and discontinuous coarsening in a γ-γ′ Co-base alloy
  In: Intermetallics 59 (2015), S. 95-101
  ISSN: 0966-9795
  DOI: 10.1016/j.intermet.2014.12.013
• Freund L., Bauer A., Benker L., Neumeier S., Göken M.:
  Formation of Cuboidal Co3AlC Precipitates in Carbon-Containing Co-Al-W-Based Superalloys
  In: Advanced Engineering Materials 17 (2015), S. 1113-1118
  ISSN: 1438-1656
  DOI: 10.1002/adem.201500171
• Kossmann J., Zenk C., Lopez-Galilea I., Neumeier S., Kostka A., Huth S., Theisen W., Göken M., Drautz R., Hammerschmidt T.:
  Microsegregation and precipitates of an as-cast Co-based superalloy-microstructural characterization and phase stability modelling
  In: Journal of Materials Science 50 (2015), S. 6329-6338
  ISSN: 0022-2461
  DOI: 10.1007/s10853-015-9177-8
• Lopez-Galilea I., Zenk C., Neumeier S., Huth S., Theisen W., Göken M.:
  The thermal stability of intermetallic compounds in an as-cast SX co-base superalloy
  In: Advanced Engineering Materials 17 (2015), S. 741-747
  ISSN: 1438-1656
  DOI: 10.1002/adem.201400249
• Neumeier S., Freund L., Göken M.:
  Novel wrought γ/γ′ cobalt base superalloys with high strength and improved oxidation resistance
  In: Scripta Materialia 109 (2015), S. 104-107
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2015.07.030
• Pyczak F., Bauer A., Göken M., Lorenz U., Neumeier S., Oehring M., Paul J., Schell N., Schreyer A., Stark A., Symanzik F.:
  The effect of tungsten content on the properties of L12-hardened Co-Al-W alloys
  In: Journal of Alloys and Compounds 632 (2015), S. 110-115
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2015.01.031
• Rehman HU., Durst K., Neumeier S., Parsa AB., Kostka A., Eggeler G., Göken M.:
  Nanoindentation studies of the mechanical properties of the mu phase in a creep deformed Re containing nickel-based superalloy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 634 (2015), S. 202-208
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2015.03.045
• Rettig R., Ritter N., Helmer H., Neumeier S., Singer R.:
  Single-crystal nickel-based superalloys developed by numerical multi-criteria optimization techniques: Design based on thermodynamic calculations and experimental validation
  In: Modelling and Simulation in Materials Science and Engineering 23 (2015), Art.Nr.: 035004
  ISSN: 1361-651X
  DOI: 10.1088/0965-0393/23/3/035004
• Terberger PJ., Sebold D., Webler R., Ziener M., Neumeier S., Klein L., Virtanen S., Göken M., Vassen R.:
  Isothermal aging of a γ′-strengthened Co-Al-W alloy coated with vacuum plasma-sprayed MCrAlY bond coats
  In: Surface & Coatings Technology 276 (2015), S. 360-367
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2015.06.048
• Webler R., Ziener M., Neumeier S., Terberger PJ., Vassen R., Göken M.:
  Evolution of microstructure and mechanical properties of coated Co-base superalloys during heat treatment and thermal exposure
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 628 (2015), S. 374-381
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2015.01.060

2014

• Bhowmik A., Neumeier S., Barnard JS., Zenk C., Göken M., Rae CMF., Stone HJ.:
  Microstructure and mechanical properties of Cr-Ta-Si Laves phase-based alloys at elevated temperatures
  In: Philosophical Magazine 94 (2014), S. 3914-3944
  ISSN: 1478-6443
  DOI: 10.1080/14786435.2014.971086
• Neumeier S., Pröbstle M., Huenert D., Göken M.:
  Tensile and creep strength of thermally exposed allvac 718Plus
  8th International Symposium on Superalloy 718 and Derivatives 2014
  In: Proceedings of 8th International Symposium on Superalloy 718 and Derivatives 2014 2014
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84923090036∨igin=inward
• Povstugar I., Choi PP., Neumeier S., Bauer A., Zenk C., Göken M., Raabe D.:
  Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation
  In: Acta Materialia 78 (2014), S. 78-85
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2014.06.020
• Webler R., Neumeier S., Göken M.:
  Characterization of oxidation protection coatings for high temperature applications by means of nanoindentation and scanning electron microscopy methods
  In: Praktische Metallographie 51 (2014), S. 568-582
  ISSN: 0032-678X
  DOI: 10.3139/147.110310
• Zenk C., Neumeier S., Stone HJ., Göken M.:
  Mechanical properties and lattice misfit of γ/γ' strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system
  In: Intermetallics 55 (2014), S. 28-39
  ISSN: 0966-9795
  DOI: 10.1016/j.intermet.2014.07.006

2013

• Pyczak F., Bauer A., Göken M., Neumeier S., Lorenz U., Oehring M., Schell N., Schreyer A., Stark A., Symanzik F.:
  Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 571 (2013), S. 13-18
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.02.007
• Pyczak F., Bauer A., Göken M., Neumeier S., Lorenz U., Oehring M., Schell N., Schreyer A., Stark A., Symanzik F.:
  Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 571 (2013), S. 13-18
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.02.007

2012

• Bauer A., Neumeier S., Pyczak F., Göken M.:
  Creep Strength and Microstructure of Polycrystalline γ′ - Strengthened Cobalt-Base Superalloys
  DOI: 10.1002/9781118516430.ch77
• Bauer A., Neumeier S., Pyczak F., Singer R., Göken M.:
  Creep properties of different γ'-strengthened Co-base superalloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 550 (2012), S. 333-341
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2012.04.083
• Göken M., Webler R., Krottenthaler M., Neumeier S., Durst K.:
  Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests
  John Wiley and Sons, 2012
  ISBN: 9780470943205
  DOI: 10.1002/9781118516430.ch10
• Neumeier S., Webler R., Krottenthaler M., Durst K., Göken M.:
  Local fracture toughness and residual stress measurements on NiAl bond coats by micro cantilever and fib-based bar milling tests
  12th International Symposium on Superalloys, Superalloys 2012 (Seven Springs, PA)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84885926632∨igin=inward

2011

• Bhowmik A., Pang HT., Neumeier S., Stone HJ., Edmonds I.:
  Microstructure and oxidation resistance of Cr-Ta-Si alloys
  2010 MRS Fall Meeting (USA, 29. November 2010 - 3. Dezember 2010)
  In: Materials Research Society Symposium Proceedings 2011
  DOI: 10.1557/opl.2011.38
• Heckl A., Neumeier S., Cenanovic S., Göken M., Singer R.:
  Reasons for the enhanced phase stability of Ru-containing nickel-based superalloys
  In: Acta Materialia 59 (2011), S. 6563-6573
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2011.07.002
• Heckl A., Neumeier S., Göken M., Singer R.:
  The effect of Re and Ru on γ/γ′ microstructure, γ-solid solution strengthening and creep strength in nickel-base superalloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011), S. 3435-3444
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2011.01.023
• Klein L., Bauer A., Neumeier S., Göken M., Virtanen S.:
  High temperature oxidation of γ/γ′-strengthened Co-base superalloys
  In: Corrosion Science 53 (2011), S. 2027-2034
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2011.02.033
• Klein L., Bauer A., Neumeier S., Göken M., Virtanen S.:
  High temperature oxidation of γ/γ′-strengthened Co-base superalloys
  In: Corrosion Science 53 (2011), S. 2027-2034
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2011.02.033
• Minshull JP., Neumeier S., Tucker MG., Stone HJ.:
  A1-L1(2) structures in the Al-Co-Ni-Ti quaternary phase system
  DOI: 10.4028/www.scientific.net/AMR.278.399
• Neumeier S, Ang J, Hobbs RA, Rae CMF, Stone HJ:
  Lattice misfit of high refractory ruthenium containing nickel-base superalloys
  In: Advanced Materials Research 278 (2011), S. 60-+
  ISSN: 1022-6680
  DOI: 10.4028/www.scientific.net/AMR.278.60
• Neumeier S., Dinkel M., Pyczak F., Göken M.:
  Nanoindentation and XRD investigations of single crystalline Ni-Ge brazed nickel-base superalloys PWA 1483 and René N5
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011), S. 815-822
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2010.09.065
• Neumeier S., Pyczaky F., Göken M.:
  Influence of rhenium and ruthenium on the local mechanical properties of the c and c0 phases in nickel-base superalloys
  In: Philosophical Magazine 91 (2011), S. 4187-4199
  ISSN: 0031-8086
  DOI: 10.1080/14786435.2011.607139

2010

• Bauer A., Neumeier S., Pyczak F., Göken M.:
  Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants
  In: Scripta Materialia 63 (2010), S. 1197-1200
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2010.08.036
• Göken M., Bauer A., Pyczak F., Neumeier S.:
  Microstructure and creep strength of different γ/γ′- strengthened Co-base superalloy variants
  63 (2010), S. 1197-1200
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2010.08.036
• Pyczak F., Neumeier S., Göken M.:
  Temperature dependence of element partitioning in rhenium and ruthenium bearing nickel-base superalloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 527 (2010), S. 7939-7943
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2010.08.091

2009

• Pyczak F., Neumeier S., Göken M.:
  Influence of lattice misfit on the internal stress and strain states before and after creep investigated in nickel-base superalloys containing rhenium and ruthenium
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009), S. 295-300
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2008.08.052
• Rettig R., Heckl A., Neumeier S., Pyczak F., Göken M., Singer R.:
  Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys
  In: Defect and Diffusion Forum 289-292 (2009), S. 101-108
  ISSN: 1012-0386
  DOI: 10.4028/www.scientific.net/DDF.289-292.101

2008

• Neumeier S., Pyczak F., Göken M.:
  The influence of ruthenium and rhenium on the local properties of the γ- and γ′-phase in nickel-base superalloys and their consequences for alloy behavior
  11th International Symposium on Superalloys, Superalloys 2008 (Champion, PA)
  In: Proceedings of the International Symposium on Superalloys 2008
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=60349117530∨igin=inward