Felfer, Peter

2024

• Kuglstatter M., Nitschky M., Hartmann A., Kümmel F., Fecher J., Felfer P., Höppel HW., Göken M.:
  Adapting Conductivity and Mechanical Properties through Layer Thickness Variation in Copper Niobium Laminated Metallic Composites
  In: Advanced Engineering Materials (2024), Art.Nr.: 2400266
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400266
• Neumeier S., Freund L., Bezold A., Köbrich M., Vollhüter J., Hausmann D., Solis C., Stark A., Schell N., Pyczak F., Felfer P., Gilles R., Göken M.:
  Advanced Polycrystalline γ′-Strengthened CoNiCr-Based Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2024)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-024-07319-6
• Ott B., Heller M., Monajem M., Felfer P.:
  Miniaturized gas exposure devices for atom probe experiments
  In: Microscopy research and technique (2024)
  ISSN: 1097-0029
  DOI: 10.1002/jemt.24573
• Schlereth C., Weiser M., White E., Felfer P., Galetz M.:
  Oxide scale microstructure and failure mechanism of alloy 601 under varying metal dusting conditions
  In: Journal of Materials Science 59 (2024), S. 1087-1103
  ISSN: 0022-2461
  DOI: 10.1007/s10853-023-09260-2
• Vorlaufer N., Josten J., Carl S., Göbel E., Soegaard A., Taccardi N., Spiecker E., Felfer P.:
  Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating
  In: Microscopy Research and Technique 87 (2024), S. 476-483
  ISSN: 1059-910X
  DOI: 10.1002/jemt.24448

2023

• Bahr A., Glechner T., Grimmer A., Wojcik T., Kutrowatz P., Podsednik M., Limbeck A., Heller M., Ramm J., Hunold O., Kolozsvári S., Polcik P., Ntemou E., Primetzhofer D., Felfer P., Riedl H.:
  High-temperature oxidation resistance of ternary and quaternary Cr-(Mo)-Si-B2-z coatings — Influence of Mo addition
  In: Surface & Coatings Technology 468 (2023), Art.Nr.: 129733
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2023.129733
• Böhm T., Felfer P., Thiele S.:
  A Modular and Automated Serial Section Collection System for Ultramicrotomy and Subsequent Imaging
  In: Microscopy and Microanalysis 29 (2023), S. 212-218
  ISSN: 1431-9276
  DOI: 10.1093/micmic/ozac007
• Börner F., Keith M., Fougerouse D., Macauley C., Felfer P., Yokosawa T., Apeleo Zubiri B., Spiecker E.:
  Between defects and inclusions: The fate of tellurium in pyrite
  In: Chemical Geology 635 (2023), Art.Nr.: 121633
  ISSN: 0009-2541
  DOI: 10.1016/j.chemgeo.2023.121633
• Börner F., Keith M., Fougerouse D., Macauley C., Felfer P., Yokosawa T., Apeleo Zubiri B., Spiecker E.:
  Between defects and inclusions: The fate of tellurium in pyrite
  In: Chemical Geology 635 (2023), S. 121633
  ISSN: 0009-2541
  DOI: 10.1016/j.chemgeo.2023.121633
• Hudak OE., Bahr A., Kutrowatz P., Wojcik T., Bohrn F., Solyom L., Schuster R., Shang L., Hunold O., Polcik P., Heller M., Felfer P., Ball G., Riedl H.:
  Pitting corrosion-Preferred chloride diffusion pathways in physical vapor deposited AlCrN coatings
  In: Corrosion Science 211 (2023)
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2022.110901
• Khanchandani H., Zeiler S., Strobel L., Göken M., Felfer P.:
  A Carbon-Stabilized Austenitic Steel with Lower Hydrogen Embrittlement Susceptibility
  In: Steel Research International (2023)
  ISSN: 1611-3683
  DOI: 10.1002/srin.202300372
• Vorlaufer N., Josten J., Carl S., Göbel E., Soegaard A., Taccardi N., Spiecker E., Felfer P.:
  Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating
  In: Microscopy Research and Technique 87 (2023), S. 476-483
  ISSN: 1059-910X
  DOI: 10.1002/jemt.24448
• Wolf M., de Oliveira A., Taccardi N., Maisel S., Heller M., Khan Antara S., Soegaard A., Felfer P., Görling A., Haumann M., Wasserscheid P.:
  Dry reforming of methane over gallium-based supported catalytically active liquid metal solutions
  In: Communications Chemistry 6 (2023), Art.Nr.: 224
  ISSN: 2399-3669
  DOI: 10.1038/s42004-023-01018-w
• Zauner L., Steiner A., Glechner T., Bahr A., Ott B., Hahn R., Wojcik T., Hunold O., Ramm J., Kolozsvári S., Polcik P., Felfer P., Riedl H.:
  Role of Si segregation in the structural, mechanical, and compositional evolution of high-temperature oxidation resistant Cr-Si-B2±z thin films
  In: Journal of Alloys and Compounds 944 (2023), Art.Nr.: 169203
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2023.169203

2022

• Glechner T., Bahr A., Hahn R., Wojcik T., Heller M., Kirnbauer A., Ramm J., Kolozsvari S., Felfer P., Riedl H.:
  High temperature oxidation resistance of physical vapor deposited Hf-Si-B-2 +/- z thin films
  In: Corrosion Science 205 (2022)
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2022.110413
• Meier MS., Jones ME., Felfer P., Moody MP., Haley D.:
  Extending Estimating Hydrogen Content in Atom Probe Tomography Experiments Where H 2 Molecule Formation Occurs
  In: Microscopy and Microanalysis 28 (2022), S. 1231-1244
  ISSN: 1431-9276
  DOI: 10.1017/S1431927621012332
• Stückler M., Zálešák J., Müller T., Wurster S., Weissitsch L., Meier M., Felfer P., Gammer C., Pippan R., Bachmaier A.:
  Oxide-stabilized microstructure of severe plastically deformed CuCo alloys
  In: Journal of Alloys and Compounds 901 (2022), Art.Nr.: 163616
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2022.163616
• Thompson Y., Zissel K., Förner A., Gonzalez-Gutierrez J., Kukla C., Neumeier S., Felfer P.:
  Metal fused filament fabrication of the nickel-base superalloy IN 718
  In: Journal of Materials Science (2022)
  ISSN: 0022-2461
  DOI: 10.1007/s10853-022-06937-y

2021

• Aschauer E., Wojcik T., Polcik P., Hunold O., Arndt M., Dalbauer V., Mayrhofer PH., Felfer P., Riedl H.:
  Ultra-high oxidation resistance of nano-structured thin films
  In: Materials & Design 201 (2021), Art.Nr.: 109499
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2021.109499
• Felfer P., Ott B., Monajem M., Dalbauer V., Heller M., Josten J., Macaulay C.:
  An Atom Probe with Ultra-Low Hydrogen Background
  In: Microscopy and Microanalysis (2021)
  ISSN: 1431-9276
  DOI: 10.1017/S1431927621013702
• Förner A., Vollhüter J., Hausmann D., Arnold C., Felfer P., Neumeier S., Göken M.:
  Nanostructuring of Nb-Si-Cr Alloys by Electron Beam Melting to Improve the Mechanical Properties and the Oxidation Behavior
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-021-06516-x
• Gonzalez-Gutierrez J., Thompson Y., Handl D., Cano S., Schuschnigg S., Felfer P., Kukla C., Holzer C., Burkhardt C.:
  Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness
  In: Materials Letters 283 (2021)
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2020.128909
• Hausmann D., Förner A., Pröbstle M., Huenert D., Felfer P., Göken M., Neumeier S.:
  Correlation Between Local Chemical Composition and Formation of Different Types of Ordered Phases in the Polycrystalline Nickel-Base Superalloy A718Plus
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100558
• Josten J., Felfer P.:
  Atom Probe Analysis of Nanoparticles through Pick and Coat Sample Preparation
  In: Microscopy and Microanalysis (2021)
  ISSN: 1431-9276
  DOI: 10.1017/S1431927621000465
• Macauley C., Heller M., Rausch A., Kümmel F., Felfer P.:
  A versatile cryo-transfer system, connecting cryogenic focused ion beam sample preparation to atom probe microscopy
  In: PLoS ONE 16 (2021), Art.Nr.: e0245555
  ISSN: 1932-6203
  DOI: 10.1371/journal.pone.0245555
• Matschkal D., Tuengerthal P., Lamm S., Göken M., Höppel HW., Felfer P.:
  Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography
  In: Metals 11 (2021), Art.Nr.: 1727
  ISSN: 2075-4701
  DOI: 10.3390/met11111727
• Raman N., Wolf M., Heller M., Heene-Würl N., Taccardi N., Haumann M., Felfer P., Wasserscheid P.:
  GaPt Supported Catalytically Active Liquid Metal Solution Catalysis for Propane Dehydrogenation-Support Influence and Coking Studies
  In: ACS Catalysis (2021), S. 13423-13433
  ISSN: 2155-5435
  DOI: 10.1021/acscatal.1c01924
• Thompson Y., Polzer M., Gonzalez-Gutierrez J., Kasian O., Heckl JP., Dalbauer V., Kukla C., Felfer P.:
  Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100380

2020

• Brandt S., Faßbender ML., Klemd R., Macauley C., Felfer P., Haase K.:
  Cumulate olivine: A novel host for heavy rare earth element mineralization
  In: Geology 49 (2020)
  ISSN: 0091-7613
  DOI: 10.1130/G48417.1
• Cautaerts N., Delville R., Stergar E., Pakarinen J., Verwerft M., Yang Y., Hofer C., Schnitzer R., Lamm S., Felfer P., Schryvers D.:
  The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study
  In: Acta Materialia 197 (2020), S. 184-197
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2020.07.022
• Fuger C., Schwartz B., Wojcik T., Moraes V., Weiss M., Limbeck A., Macauley C., Hunold O., Polcik P., Primetzhofer D., Felfer P., Mayrhofer PH., Riedl H.:
  Influence of Ta on the oxidation resistance of WB2−z coatings
  In: Journal of Alloys and Compounds (2020), Art.Nr.: 158121
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2020.158121
• Förner A., Giese S., Arnold C., Felfer P., Körner C., Neumeier S., Göken M.:
  Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting
  In: Scientific Reports 10 (2020), Art.Nr.: 15153
  ISSN: 2045-2322
  DOI: 10.1038/s41598-020-72093-5
• Kirchmayer A., Lyu H., Pröbstle M., Houlle F., Förner A., Huenert D., Göken M., Felfer P., Bitzek E., Neumeier S.:
  Combining Experiments and Atom Probe Tomography-Informed Simulations on γ′ Precipitation Strengthening in the Polycrystalline Ni-Base Superalloy A718Plus
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000149
• Penk D., Müller J., Felfer P., Grosso R., Stamminger M.:
  Visualization Aided Interface Reconstruction
  VMV 2020, 25th International Symposium on Vision, Modeling, and Visualization (Tübingen, 28. September 2020 - 1. Oktober 2020)
• Schirmer T., Ließmann W., Macauley C., Felfer P.:
  Indium and antimony distribution in a sphalerite from the “burgstaetter gangzug” of the upper harz mountains pb-zn mineralization
  In: Minerals 10 (2020), S. 1-19
  ISSN: 2075-163X
  DOI: 10.3390/min10090791
• Stückler M., Weissitsch L., Wurster S., Felfer P., Krenn H., Pippan R., Bachmaier A.:
  Magnetic dilution by severe plastic deformation
  In: AIP Advances 10 (2020), Art.Nr.: 015210
  ISSN: 2158-3226
  DOI: 10.1063/1.5128058
• Zenk C., Volz N., Zenk C., Felfer P., Neumeier S.:
  Impact of the Co/Ni-Ratio on Microstructure, Thermophysical Properties and Creep Performance of Multi-Component γ′-Strengthened Superalloys
  In: Crystals 10 (2020), S. 1058
  ISSN: 2073-4352
  DOI: 10.3390/cryst10111058

2019

• Glöckel F., Uggowitzer PJ., Felfer P., Pogatscher S., Höppel HW.:
  Influence of Zn and Sn on the precipitation behavior of new Al-Mg-Si alloys
  In: Materials 12 (2019), Art.Nr.: 2547
  ISSN: 1996-1944
  DOI: 10.3390/ma12162547
• Gonzalez-Gutierrez J., Thompson Y., Cano S., Felfer P., Kukla C., Holzer C.:
  Steel parts produced by material extrusion additive manufacturing, solvent debiding and sintering
  Materials Science and Technology 2019, MS and T 2019 (Portland, OR, 29. September 2019 - 3. Oktober 2019)
  In: MS and T 2019 - Materials Science and Technology 2019 2019
  DOI: 10.7449/2019/MST_2019_264_266
• Lamm S., Matschkal D., Göken M., Felfer P.:
  Impact of Mn on the precipitate structure and creep resistance of Ca containing magnesium alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 761 (2019), Art.Nr.: 137964
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2019.05.094
• Mueller T., Kapp MW., Bachmaier A., Felfer P., Pippan R.:
  Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion
  In: Acta Materialia 166 (2019), S. 168-177
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.12.028
• Thompson Y., Gonzalez-Gutierrez J., Kukla C., Felfer P.:
  Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel
  In: Additive Manufacturing 30 (2019), Art.Nr.: 100861
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.100861

2018

• Barr CM., Felfer P., Cole JI., Taheri ML.:
  Observation of oscillatory radiation induced segregation profiles at grain boundaries in neutron irradiated 316 stainless steel using atom probe tomography
  In: Journal of Nuclear Materials 504 (2018), S. 181-190
  ISSN: 0022-3115
  DOI: 10.1016/j.jnucmat.2018.01.053
• Felfer P., Cairney J.:
  Advanced concentration analysis of atom probe tomography data: Local proximity histograms and pseudo-2D concentration maps
  In: Ultramicroscopy 189 (2018), S. 61-64
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2018.03.011
• Felfer P., Sandfeld S.:
  Digitalisation in Materials Science – Combining Experiments and Simulation Across Length Scales
  In: Praktische Metallographie 55 (2018), S. 492-
  ISSN: 0032-678X
  DOI: 10.3139/147.018081
• Felfer P., Stephenson LT., Li T.:
  Atom Probe Tomography
  In: Praktische Metallographie 55 (2018), S. 515-526
  ISSN: 0032-678X
  DOI: 10.3139/147.110543
• Li T., Kasian O., Cherevko S., Zhang S., Geiger S., Scheu C., Felfer P., Raabe D., Gault B., Mayrhofer K.:
  Atomic-scale insights into surface species of electrocatalysts in three dimensions
  In: Nature Catalysis 1 (2018), S. 300-305
  ISSN: 2520-1158
  DOI: 10.1038/s41929-018-0043-3
• Makineni SK., Lenz M., Kontis P., Li Z., Kumar A., Felfer P., Neumeier S., Herbig M., Spiecker E., Raabe D., Gault B.:
  Correlative Microscopy-Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys
  In: JOM Journal of the Minerals, Metals and Materials Society 70 (2018), S. 1736-1743
  ISSN: 1047-4838
  DOI: 10.1007/s11837-018-2802-7
• Makineni SK., Lenz M., Kontis P., Li Z., Kumar A., Felfer P., Neumeier S., Herbig M., Spiecker E., Raabe D., Gault B.:
  Correlative Microscopy—Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys
  In: JOM Journal of the Minerals, Metals and Materials Society (2018), S. 1-8
  ISSN: 1047-4838
  DOI: 10.1007/s11837-018-2802-7
• Mccarroll I., Scherrer B., Felfer P., Moody MP., Cairney JM.:
  Interpreting Atom Probe Data from Oxide-Metal Interfaces
  In: Microscopy and Microanalysis 24 (2018), S. 342-349
  ISSN: 1431-9276
  DOI: 10.1017/S1431927618012370

2017

• Eder K., Felfer P., Gault B., Ceguerra AV., La Fontaine A., Masters AF., Maschmeyer T., Cairney JM.:
  A New Approach to Understand the Adsorption of Thiophene on Different Surfaces: An Atom Probe Investigation of Self-Assembled Monolayers
  In: Langmuir 33 (2017), S. 9573-9581
  ISSN: 0743-7463
  DOI: 10.1021/acs.langmuir.7b01820
• Leitner (Babinsky) K., Felfer P., Holec D., Cairney J., Knabl W., Lorich A., Clemens H., Primig S.:
  On grain boundary segregation in molybdenum materials
  In: Materials & Design 135 (2017), S. 204-212
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2017.09.019
• Wang L., Zenk C., Stark A., Felfer P., Gabrisch H., Göken M., Lorenz U., Pyczak F.:
  Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys
  In: Acta Materialia 137 (2017), S. 36-44
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.07.018

2016

• Cairney J., Eder K., Felfer P., Masters A.:
  Contributions to understanding catalysis by using atom probe tomography
• Eder K., Felfer P., Ferry M., Xia K., Cairney JM.:
  Grain size stability in Al-Sc alloys processed by severe plastic deformation
  In: Scripta Materialia 123 (2016), S. 105-108
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2016.06.005
• Felfer P., Cairney J.:
  A computational geometry framework for the optimisation of atom probe reconstructions
  In: Ultramicroscopy 169 (2016), S. 62-68
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2016.07.008
• Felfer P., Mccarroll I., Macauley C., Cairney JM.:
  A simple approach to atom probe sample preparation by using shadow masks
  In: Ultramicroscopy 160 (2016), S. 163-167
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2015.09.005
• He MR., Samudrala SK., Kim G., Felfer P., Breen AJ., Cairney JM., Gianola DS.:
  Linking stress-driven microstructural evolution in nanocrystalline aluminium with grain boundary doping of oxygen
  In: Nature Communications 7 (2016), Art.Nr.: 11225
  ISSN: 2041-1723
  DOI: 10.1038/ncomms11225
• Kaub TM., Felfer P., Cairney JM., Thompson GB.:
  Influence of Ni Solute segregation on the intrinsic growth stresses in Cu(Ni) thin films
  In: Scripta Materialia 113 (2016), S. 131-134
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2015.10.010

2015

• Cairney JM., Rajan K., Haley D., Gault B., Bagot PJ., Choi PP., Felfer P., Ringer SP., Marceau RKW., Moody MP.:
  Mining information from atom probe data
  In: Ultramicroscopy 159 (2015), S. 324-337
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2015.05.006
• Felfer P., Ceguerra AV., Ringer SP., Cairney JM.:
  Detecting and extracting clusters in atom probe data: A simple, automated method using Voronoi cells
  In: Ultramicroscopy 150 (2015), S. 30-36
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2014.11.015
• Felfer P., Li T., Eder K., Galinski H., Magyar AP., Bell DC., Smith GDW., Kruse N., Ringer SP., Cairney JM.:
  New approaches to nanoparticle sample fabrication for atom probe tomography
  DOI: 10.1016/j.ultramic.2015.04.014
• Felfer P., Scherrer B., Demeulemeester J., Vandervorst W., Cairney JM.:
  Mapping interfacial excess in atom probe data
  DOI: 10.1016/j.ultramic.2015.06.002
• La Fontaine A., Yen HW., Felfer P., Ringer SP., Cairney JM.:
  Atom probe study of chromium oxide spinels formed during intergranular corrosion
  In: Scripta Materialia 99 (2015), S. 1-4
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2014.09.028
• McCarroll I., La Fontaine A., Felfer P., Zhang J., Young D., Cairney J.:
  Atom probe microscopy of oxidation products
  European Corrosion Congress, EUROCORR 2015 (Graz, 6. September 2015 - 10. September 2015)
  In: European Corrosion Congress, EUROCORR 2015 2015
• Scherrer B., Doebeli M., Felfer P., Spolenak R., Cairney J., Galinski H.:
  The Hidden Pathways in Dense Energy Materials - Oxygen at Defects in Nanocrystalline Metals
  In: Advanced Materials 27 (2015), S. 6220-6224
  ISSN: 0935-9648
  DOI: 10.1002/adma.201503118

2014

• Felfer P., Benndorf P., Masters A., Maschmeyer T., Cairney JM.:
  Revealing the Distribution of the Atoms within Individual Bimetallic Catalyst Nanoparticles
  In: Angewandte Chemie International Edition 53 (2014), S. 11190-11193
  ISSN: 1433-7851
  DOI: 10.1002/anie.201405043
• He MR., Felfer P., Dasgupta S., Samudrala SK., Malone PJ., Feng G., Hemker KJ., Cairney JM., Gianola DS.:
  Understanding the mechanical behavior of nanocrystalline Al-O thin films with complex microstructures
  In: Acta Materialia 77 (2014), S. 269-283
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2014.05.058
• Magagnosc DJ., Kumar G., Schroers J., Felfer P., Cairney JM., Gianola DS.:
  Effect of ion irradiation on tensile ductility, strength and fictive temperature in metallic glass nanowires
  In: Acta Materialia 74 (2014), S. 165-182
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2014.04.002
• Young DJ., Thuan Dinh Nguyen ., Felfer P., Zhang J., Cairney JM.:
  Penetration of protective chromia scales by carbon
  In: Scripta Materialia 77 (2014), S. 29-32
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2014.01.009

2013

• Ceguerra AV., Breen AJ., Stephenson LT., Felfer P., Araullo-Peters VJ., Liddicoat PV., Cui X., Yao L., Haley D., Moody MP., Gault B., Cairney JM., Ringer SP.:
  The rise of computational techniques in atom probe microscopy
  In: Current Opinion in Solid State & Materials Science 17 (2013), S. 224-235
  ISSN: 1359-0286
  DOI: 10.1016/j.cossms.2013.09.006
• Felfer P., Ceguerra A., Ringer S., Cairney J.:
  Applying computational geometry techniques for advanced feature analysis in atom probe data
  In: Ultramicroscopy 132 (2013), S. 100-106
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2013.03.004
• Gault B., Felfer P., Ivermark M., Bergqvist H., Cairney JM., Ringer SP.:
  Atom probe microscopy characterization of as quenched Zr-0.8 wt% Fe and Zr-0.15 wt% Cr binary alloys
  In: Materials Letters 91 (2013), S. 63-66
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2012.09.059
• Samudrala SK., Felfer P., Araullo-Peters VJ., Cao Y., Liao XZ., Cairney JM.:
  New atom probe approaches to studying segregation in nanocrystalline materials
  In: Ultramicroscopy 132 (2013), S. 158-163
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2012.12.013
• Xiang Y., Chitry V., Liddicoat P., Felfer P., Cairney J., Ringer S., Kruse N.:
  Long-Chain Terminal Alcohols through Catalytic CO Hydrogenation
  In: Journal of the American Chemical Society 135 (2013), S. 7114-7117
  ISSN: 0002-7863
  DOI: 10.1021/ja402512r
• Xie KY., Shrestha S., Cao Y., Felfer P., Wang Y., Liao X., Cairney JM., Ringer SP.:
  The effect of pre-existing defects on the strength and deformation behavior of α-Fe nanopillars
  In: Acta Materialia 61 (2013), S. 439-452
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2012.09.022
• Xie KY., Shrestha SL., Felfer P., Cairney JM., Killmore CR., Carpenter KR., Kaul HR., Ringer SP.:
  High strength and retained ductility achieved in a nitrided strip cast Nb-microalloyed steel
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 44 (2013), S. 848-855
  ISSN: 1073-5623
  DOI: 10.1007/s11661-012-1446-4

2012

• Alam T., Felfer P., Chaturvedi M., Stephenson LT., Kilburn MR., Cairney JM.:
  Segregation of B, P, and C in the ni-based superalloy, Inconel 718
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 (2012), S. 2183-2191
  ISSN: 1073-5623
  DOI: 10.1007/s11661-012-1085-9
• Felfer P., Alam T., Ringer SP., Cairney JM.:
  A reproducible method for damage-free site-specific preparation of atom probe tips from interfaces
  In: Microscopy Research and Technique 75 (2012), S. 484-491
  ISSN: 1059-910X
  DOI: 10.1002/jemt.21081
• Felfer P., Gault B., Sha G., Stephenson L., Ringer SP., Cairney JM.:
  A new approach to the determination of concentration profiles in atom probe tomography
  In: Microscopy and Microanalysis 18 (2012), S. 359-364
  ISSN: 1431-9276
  DOI: 10.1017/S1431927611012530
• Felfer P., Killmore CR., Williams JG., Carpenter KR., Ringer SP., Cairney JM.:
  A quantitative atom probe study of the Nb excess at prior austenite grain boundaries in a Nb microalloyed strip-cast steel
  In: Acta Materialia 60 (2012), S. 5049-5055
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2012.06.013

2011

• Felfer P., Ringer SP., Cairney JM.:
  Shaping the lens of the atom probe: Fabrication of site specific, oriented specimens and application to grain boundary analysis
  In: Ultramicroscopy 111 (2011), S. 435-439
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2010.12.005

2010

• Rachbauer R., Massl S., Stergar E., Felfer P., Mayrhofer PH.:
  Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films
  In: Surface & Coatings Technology 204 (2010), S. 1811-1816
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2009.11.020