Publikationen
Alle öffnen
2024
Arnoldt A. , Österreicher JA. , Schiffl A. , Höppel HW. :Optimizing the Zn and Mg contents of Al–Zn–Mg wrought alloys for high strength and industrial-scale extrudability Journal of Materials Research and Technology 32 2024 ), S. 2972-2982 ISSN: 2238-7854 10.1016/j.jmrt.2024.08.014 Bandorf J. , Kirzinger A. , Zenk C. , Pang HT. , Rae CM. , Stone HJ. , Neumeier S. :On the Evolution of the γ/γ′ Lattice Misfit and TCP Phase Precipitation in a Highly Alloyed Single Crystalline Ni-Base Superalloy 15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024 10.1007/978-3-031-63937-1_7 Bezold A. , Vollhüter J. , Karpstein N. , Lenz M. , Subramanyam AP. , Zenk C. , Hammerschmidt T. , Spiecker E. , Göken M. , Neumeier S. :Segregation-induced strength anomalies in complex single-crystalline superalloys Communications Materials 5 2024 ), Art.Nr.: 8 ISSN: 2662-4443 10.1038/s43246-024-00447-x Dölling J. , Kuglstatter M. , Prahl U. , Höppel HW. , Ortner P. , Ott B. , Kracun SF. , Fehlbier M. , Zilly A. :Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium Metals 14 2024 ), S. 258 ISSN: 2075-4701 10.3390/met14030258 Dölling J. , Kuglstatter M. , Prahl U. , Höppel HW. , Ortner P. , Ott B. , Kracun SF. , Fehlbier M. , Zilly A. :Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium Metals 14 2024 ), Art.Nr.: 258 ISSN: 2075-4701 10.3390/met14030258 Gaag T. , Weidinger J. , Bandorf J. , Lux V. , Wahlmann B. , Neumeier S. , Zenk C. , Körner C. :Experimental Validation of Property Models and Databases for Computational Superalloy Design Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202401051 Gebhart DD. , Krapf A. , Schretter L. , Lassnig A. , Merle B. , Cordill MJ. , Gammer C. :Cyclic Failure of a Cr–Au Bilayer on Polyimide: In Situ Transmission Electron Microscopy Observations of Interfacial Dislocation Mechanisms Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202400251 Ghorbani F. , Kim MH. , Ghalandari B. , Zhang M. , Varma SN. , Schöbel L. , Liu C. , Boccaccini AR. :Architecture of β-lactoglobulin coating modulates bioinspired alginate dialdehyde-gelatine/polydopamine scaffolds for subchondral bone regeneration Acta Biomaterialia 181 2024 ), S. 188-201 ISSN: 1742-7061 10.1016/j.actbio.2024.04.028 Haußmann L. , Bresler J. , Neumeier S. , Pyczak F. , Göken M. :Interdiffusion Coefficients and Strengthening Effects of Nb, Ta, and Zr in the α2-Ti3Al Phase Journal of Phase Equilibria and Diffusion 2024 )ISSN: 1547-7037 10.1007/s11669-024-01105-y Haußmann L. , Neumeier S. , Hausmann A. , Bergamaschi E. , Göken M. :Combinatorial Materials Research for the Development of New Advanced CoNi-Base Superalloys 15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024 10.1007/978-3-031-63937-1_8 Karpstein N. , Lenz M. , Bezold A. , Zehl R. , Wu M. , Ludwig A. , Laplanche G. , Neumeier S. , Spiecker E. :Unambiguous Stacking Fault Analysis for Unraveling Shearing Mechanisms and Shear-Based Transformations in the L12-Ordered γ′ Phase 15th International Symposium on Superalloys, ISS 2024 (Champion, PA, USA 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Proceedings of the 15th International Symposium on Superalloys 2024 10.1007/978-3-031-63937-1_4 Karpstein N. , Wu M. , Bezold A. , Neumeier S. , Cormier J. , Spiecker E. :Temperature and Time Dependence of Elemental Segregation at Stacking Faults in Ni- and Co-Base Superalloys 15th International Symposium on Superalloys, ISS 2024 (Champion, PA, USA 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024 10.1007/978-3-031-63937-1_47 Kim MH. , Schöbel L. , Geske M. , Boccaccini AR. , Ghorbani F. :Bovine serum albumin-modified 3D printed alginate dialdehyde-gelatin scaffolds incorporating polydopamine/SiO2-CaO nanoparticles for bone regeneration International Journal of Biological Macromolecules 264 2024 ), Art.Nr.: 130666 ISSN: 0141-8130 10.1016/j.ijbiomac.2024.130666 Kirchmayer A. , Hausmann A. , Gabel S. , Pröbstle M. , Giese S. , Göken M. , Hünert D. , Neumeier S. :The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 2024 ), S. 803-811 ISSN: 1073-5623 10.1007/s11661-023-07286-4 Kirchmayer A. , Hausmann D. , Gabel S. , Pröbstle M. , Giese S. , Göken M. , Hünert D. , Neumeier S. :The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 2024 ), S. 803-811 ISSN: 1073-5623 10.1007/s11661-023-07286-4 Krapf A. , Merle B. , Gebhart DD. , Reiter M. , Lassnig A. , Göken M. , Cordill MJ. , Gammer C. :Observing High-Cycle Fatigue Damage in Freestanding Gold Thin Films with Bulge Testing and Intermittent Transmission Electron Microscopy Imaging Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202400216 Kuglstatter M. , Nitschky M. , Hartmann A. , Kümmel F. , Fecher J. , Felfer P. , Höppel HW. , Göken M. :Adapting Conductivity and Mechanical Properties through Layer Thickness Variation in Copper Niobium Laminated Metallic Composites Advanced Engineering Materials 2024 ), Art.Nr.: 2400266 ISSN: 1438-1656 10.1002/adem.202400266 Neumeier S. , Freund L. , Bezold A. , Köbrich M. , Vollhüter J. , Hausmann D. , Solis C. , Stark A. , Schell N. , Pyczak F. , Felfer P. , Gilles R. , Göken M. :Advanced Polycrystalline γ′-Strengthened CoNiCr-Based Superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2024 )ISSN: 1073-5623 10.1007/s11661-024-07319-6 Ortner P. , Schiffl A. , Höppel HW. :Influence of a Preageing Treatment on the Cluster Formation and the Further Ageing Route in Al–Mg–Si Extrusion Alloys Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202400623 Ott B. , Heller M. , Monajem M. , Felfer P. :Miniaturized gas exposure devices for atom probe experiments Microscopy research and technique 2024 )ISSN: 1097-0029 10.1002/jemt.24573 Pereira RM. , Lohbauer U. , Schulbert C. , Göken M. , Wurmshuber M. , Campos TBM. , Thim GP. , Mieller B. , Belli R. :Instantiations of Multiscale Kinship in Pressing‐Defect Distributions in Yttria‐Stabilized Zirconias by Powder Partitioning Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202400139 Prado L. , Hayek S. , Mazare AV. , Erceg I. , Sarau G. , Christiansen S. , Kamaleev M. , Wurmshuber M. , Lohbauer U. , Goldmann W. , Virtanen S. , Tesler A. :Aerophilic Surfaces for Sustained Corrosion Protection of Metals Underwater Advanced Functional Materials 2024 ), Art.Nr.: 2407444 ISSN: 1616-301X 10.1002/adfm.202407444 Rothermel F. , Thiele S. , Jung C. , Krapf A. , Ilse SE. , Merle B. , Giessen H. , Herkommer AM. :Fabrication and Characterization of a Magnetic 3D-printed Microactuator Advanced Materials Technologies 2024 )ISSN: 2365-709X 10.1002/admt.202302196 Schimbäck D. , Kaserer L. , Mair P. , Mohebbi MS. , Staron P. , Maier-Kiener V. , Letofsky-Papst I. , Kremmer T. , Palm F. , Montes I. , Höppel HW. , Leichtfried G. , Pogatscher S. :Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 905 2024 ), Art.Nr.: 146102 ISSN: 0921-5093 10.1016/j.msea.2024.146102 Schlereth C. , Weiser M. , White E. , Felfer P. , Galetz M. :Oxide scale microstructure and failure mechanism of alloy 601 under varying metal dusting conditions Journal of Materials Science 59 2024 ), S. 1087-1103 ISSN: 0022-2461 10.1007/s10853-023-09260-2 Schmuck K. , Burtscher M. , Alfreider M. , Wurmshuber M. , Kiener D. :Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites JOM Journal of the Minerals, Metals and Materials Society 2024 )ISSN: 1047-4838 10.1007/s11837-023-06348-7 Seynstahl A. , Köbrich M. , Rosnitschek T. , Göken M. , Tremmel S. :Enhancing the lifetime and vacuum tribological performance of PVD-MoS2 coatings by nitrogen modification Surface & Coatings Technology 477 2024 ), Art.Nr.: 130343 ISSN: 0257-8972 10.1016/j.surfcoat.2023.130343 Titz K. , Vollhüter J. , Randelzhofer P. , Neumeier S. , Göken M. , Wahlmann B. , Körner C. :Design and Characterization of a Novel NiAl–(Cr,Mo) Eutectic Alloy Advanced Engineering Materials 2024 )ISSN: 1438-1656 10.1002/adem.202302079 Tsankova S. , Nagel O. , Bezold A. , Grandjean B. , Kirchmayer A. , Göken M. , Neumeier S. :Exploring Microstructural Characteristics, Mechanical Behavior, Hydrogen Embrittlement, and Long-Term Stability of Polycrystalline CoNiCr-Based Superalloys 15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA 8. September 2024 - 12. September 2024 )In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024 10.1007/978-3-031-63937-1_30 Vorlaufer N. , Josten J. , Carl S. , Göbel E. , Soegaard A. , Taccardi N. , Spiecker E. , Felfer P. :Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating Microscopy Research and Technique 87 2024 ), S. 476-483 ISSN: 1059-910X 10.1002/jemt.24448 Wilmers J. , Wurmshuber M. , Gescher C. , Graupp CM. , Kiener D. , Bargmann S. :Unraveling the orientation-dependent mechanics of dental enamel in the red-necked wallaby Acta Biomaterialia 2024 )ISSN: 1742-7061 10.1016/j.actbio.2024.07.004 Winczewski JP. , Zeiler S. , Gabel S. , Maestre D. , Merle B. , Gardeniers JG. , Susarrey Arce A. :Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures Materials and Design 238 2024 ), Art.Nr.: 112701 ISSN: 0261-3069 10.1016/j.matdes.2024.112701
2023
Bahr A. , Glechner T. , Grimmer A. , Wojcik T. , Kutrowatz P. , Podsednik M. , Limbeck A. , Heller M. , Ramm J. , Hunold O. , Kolozsvári S. , Polcik P. , Ntemou E. , Primetzhofer D. , Felfer P. , Riedl H. :High-temperature oxidation resistance of ternary and quaternary Cr-(Mo)-Si-B2-z coatings — Influence of Mo addition Surface & Coatings Technology 468 2023 ), Art.Nr.: 129733 ISSN: 0257-8972 10.1016/j.surfcoat.2023.129733 Bezold A. , Amon L. , Karpstein N. , Spiecker E. , Göken M. , Neumeier S. :Recovery of superlattice stacking faults at high temperatures Scripta Materialia 222 2023 ), Art.Nr.: 115005 ISSN: 1359-6462 10.1016/j.scriptamat.2022.115005 Bezold A. , Neumeier S. :Tailoring deformation mechanisms in polycrystalline CoNi-base superalloys for enhanced high temperature strength Scripta Materialia 226 2023 ), Art.Nr.: 115250 ISSN: 1359-6462 10.1016/j.scriptamat.2022.115250 Böhm T. , Felfer P. , Thiele S. :A Modular and Automated Serial Section Collection System for Ultramicrotomy and Subsequent Imaging Microscopy and Microanalysis 29 2023 ), S. 212-218 ISSN: 1431-9276 10.1093/micmic/ozac007 Börner F. , Keith M. , Fougerouse D. , Macauley C. , Felfer P. , Yokosawa T. , Apeleo Zubiri B. , Spiecker E. :Between defects and inclusions: The fate of tellurium in pyrite Chemical Geology 635 2023 ), S. 121633 ISSN: 0009-2541 10.1016/j.chemgeo.2023.121633 Börner F. , Keith M. , Fougerouse D. , Macauley C. , Felfer P. , Yokosawa T. , Apeleo Zubiri B. , Spiecker E. :Between defects and inclusions: The fate of tellurium in pyrite Chemical Geology 635 2023 ), Art.Nr.: 121633 ISSN: 0009-2541 10.1016/j.chemgeo.2023.121633 Fritton M. , Kümmel F. , Kirchmayer A. , Stark A. , Hafez Haghighat M. , Gehrmann B. , Neumeier S. , Gilles R. :Investigation of the Hot Deformation Behavior in VDM® Alloy 780 by In Situ High-Energy X-Ray Diffraction Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2023 )ISSN: 1073-5623 10.1007/s11661-022-06942-5 Fuchs C. , Elitzer D. , Höppel HW. , Göken M. , Zaeh MF. :Investigation into the influence of the interlayer temperature on machinability and microstructure of additively manufactured Ti-6Al-4V Production Engineering 2023 )ISSN: 0944-6524 10.1007/s11740-023-01192-9 Förner A. , Vollhüter J. , Krapf A. , Jamjoom AFA. , Hausmann D. , Wahlmann B. , Fu Z. , Körner C. , Neumeier S. , Göken M. :Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites Advanced Engineering Materials 2023 )ISSN: 1438-1656 10.1002/adem.202300407 Gebhart DD. , Krapf A. , Merle B. , Gammer C. , Cordill MJ. :Describing mechanical damage evolution through in situ electrical resistance measurements Journal of Vacuum Science & Technology A 41 2023 ), Art.Nr.: 023408 ISSN: 0734-2101 10.1116/6.0002362 Goik P. , Schiffl A. , Höppel HW. :Formation of Peripheral Coarse Grain in Thin-Walled Al–Mg–Si Extrusion Profiles Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2023 )ISSN: 1073-5623 10.1007/s11661-023-07144-3 Goik P. , Schiffl A. , Höppel HW. , Göken M. :The Role of Through-Thickness Variation of Texture and Grain Size on Bending Ductility of Al–Mg–Si Profiles Light Metals Symposium held at the TMS Annual Meeting and Exhibition, TMS 2023 (San Diego, CA, USA 19. März 2023 - 23. März 2023 )In: Stephan Broek (Hrsg.): Minerals, Metals and Materials Series 2023 10.1007/978-3-031-22532-1_77 Hagen S. , Haußmann L. , Wahlmann B. , Gebhardt F. , Abu-Khousa B. , Weiser M. , Neumeier S. , Zenk C. , Virtanen S. :Influence of the W and Ta content on the High-Temperature Oxidation Resistance of Multinary Co/Ni-Based Superalloys at 1050 °C and 1150 °C High Temperature Corrosion of Materials 2023 )ISSN: 2731-8397 10.1007/s11085-023-10183-1 Holz H. , Merle B. :Novel nanoindentation strain rate sweep method for continuously investigating the strain rate sensitivity of materials at the nanoscale Materials & Design 236 2023 ), Art.Nr.: 112471 ISSN: 0264-1275 10.1016/j.matdes.2023.112471 Hudak OE. , Bahr A. , Kutrowatz P. , Wojcik T. , Bohrn F. , Solyom L. , Schuster R. , Shang L. , Hunold O. , Polcik P. , Heller M. , Felfer P. , Ball G. , Riedl H. :Pitting corrosion-Preferred chloride diffusion pathways in physical vapor deposited AlCrN coatings Corrosion Science 211 2023 )ISSN: 0010-938X 10.1016/j.corsci.2022.110901 Karpstein N. , Lenz M. , Bezold A. , Wu M. , Neumeier S. , Spiecker E. :Reliable identification of the complex or superlattice nature of intrinsic and extrinsic stacking faults in the L12 phase by high-resolution imaging Acta Materialia 260 2023 ), Art.Nr.: 119284 ISSN: 1359-6454 10.1016/j.actamat.2023.119284 Khanchandani H. , Rolli R. , Schneider HC. , Kirchlechner C. , Gault B. :Hydrogen embrittlement of twinning-induced plasticity steels: Contribution of segregation to twin boundaries Scripta Materialia 225 2023 ), Art.Nr.: 115187 ISSN: 1359-6462 10.1016/j.scriptamat.2022.115187 Khanchandani H. , Zeiler S. , Strobel L. , Göken M. , Felfer P. :A Carbon-Stabilized Austenitic Steel with Lower Hydrogen Embrittlement Susceptibility Steel Research International 2023 )ISSN: 1611-3683 10.1002/srin.202300372 Kiener D. , Wurmshuber M. , Alfreider M. , Schaffar GJ. , Maier-Kiener V. :Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions Current Opinion in Solid State & Materials Science 27 2023 ), Art.Nr.: 101108 ISSN: 1359-0286 10.1016/j.cossms.2023.101108 https://www.sciencedirect.com/science/article/pii/S1359028623000530 Kirchmayer A. , Pröbstle M. , Huenert D. , Neumeier S. , Göken M. :Influence of Grain Size and Volume Fraction of η/δ Precipitates on the Dwell Fatigue Crack Propagation Rate and Creep Resistance of the Nickel-Base Superalloy ATI 718Plus Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2023 )ISSN: 1073-5623 10.1007/s11661-023-07001-3 Kirchmayer A. , Weiser M. , Randelzhofer P. , Freund L. , Gehrmann B. , Haghighat MH. , Huenert D. , Göken M. , Neumeier S. :Oxidation Behavior of the Polycrystalline Ni-Base Superalloy VDM® Alloy 780 Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2023 )ISSN: 1073-5623 10.1007/s11661-022-06956-z Krapf A. , Gebhart DD. , Gammer C. , Cordill MJ. , Merle B. :Creep-dominated fatigue of freestanding gold thin films studied by bulge testing Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 887 2023 ), Art.Nr.: 145759 ISSN: 0921-5093 10.1016/j.msea.2023.145759 Kuczyk M. , Zawischa M. , Krülle T. , Vollhüter J. , Zeiler S. , Leonhardt M. , Kaspar J. , Zimmer O. , Göken M. , Leyens C. , Zimmermann M. :In situ mechanical testing of hard yet tough high entropy nitride coatings deposited on compliant steel substrates Thin Solid Films 787 2023 ), Art.Nr.: 140137 ISSN: 0040-6090 10.1016/j.tsf.2023.140137 Köbrich M. , Förner A. , Volz N. , Zenk C. , Fries SG. , Göken M. , Neumeier S. :Influence of refractory and platinum group metals on the microstructure and thermo-physical properties of Co-Al-W-based superalloys Journal of Alloys and Compounds 947 2023 ), Art.Nr.: 169542 ISSN: 0925-8388 10.1016/j.jallcom.2023.169542 Marian M. , Zambrano D. , Rothammer B. , Waltenberger V. , Boidi G. , Krapf A. , Merle B. , Stampfl J. , Rosenkranz A. , Gachot C. , Grützmacher P. :Combining multi-scale surface texturing and DLC coatings for improved tribological performance of 3D printed polymers Surface & Coatings Technology 466 2023 ), S. 129682 ISSN: 0257-8972 10.1016/j.surfcoat.2023.129682 Morales LA. , Bezold A. , Förner A. , Holz H. , Merle B. , Neumeier S. , Körner C. , Zenk C. :Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe-Based alpha/alpha '/alpha '' Superalloy Advanced Engineering Materials 2023 )ISSN: 1438-1656 10.1002/adem.202201652 Palm MS. , Diepold B. , Neumeier S. , Höppel HW. , Göken M. , Zaeh MF. :Detection and effects of lack of fusion defects in Hastelloy X manufactured by laser powder bed fusion Materials & Design 230 2023 ), Art.Nr.: 111941 ISSN: 0264-1275 10.1016/j.matdes.2023.111941 Pohl P. , Kuglstatter M. , Göken M. , Höppel HW. :Quantifying Co-Deformation Effects in Metallic Laminates by Loading–Unloading–Reloading Tensile Tests Metals 13 2023 ), S. 1049 ISSN: 2075-4701 10.3390/met13061049 Pyczak F. , Liang Z. , Neumeier S. , Rao Z. :Stability and Physical Properties of the L1(2)-gamma ' Phase in the CoNiAlTi-System Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2023 )ISSN: 1073-5623 10.1007/s11661-022-06949-y Risse JH. , Trempa M. , Huber F. , Höppel HW. , Bartels D. , Schmidt M. , Reimann C. , Friedrich J. :Microstructure and Mechanical Properties of Hypereutectic Al-High Si Alloys up to 70 wt.% Si-Content Produced from Pre-Alloyed and Blended Powder via Laser Powder Bed Fusion Materials 16 2023 ), S. 657 ISSN: 1996-1944 10.3390/ma16020657 Rothammer B. , Schwendner M. , Bartz M. , Wartzack S. , Böhm T. , Krauß S. , Merle B. , Schroeder S. , Uhler M. , Kretzer JP. , Weihnacht V. , Marian M. :Wear Mechanism of Superhard Tetrahedral Amorphous Carbon (ta-C) Coatings for Biomedical Applications Advanced Materials Interfaces 10 2023 ), S. 1 - 17 ISSN: 2196-7350 10.1002/admi.202202370 https://onlinelibrary.wiley.com/doi/10.1002/admi.202202370 Sasidhar K. , Khanchandani H. , Zhang S. , Kwiatkowski da Silva A. , Scheu C. , Gault B. , Ponge D. , Raabe D. :Understanding the protective ability of the native oxide on an Fe-13 at% Cr alloy at the atomic scale: A combined atom probe and electron microscopy study Corrosion Science 211 2023 ), Art.Nr.: 110848 ISSN: 0010-938X 10.1016/j.corsci.2022.110848 Seligmann B. , Alfreider M. , Wurmshuber M. , Kiener D. :Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures Advanced Engineering Materials 25 2023 ), Art.Nr.: 2201209 ISSN: 1438-1656 10.1002/adem.202201209 Vaid A. , Zaiser M. , Bitzek E. :Atomistic Simulations of Dislocation-Void Interactions in Concentrated Solid Solution Alloys Metals 13 2023 ), Art.Nr.: 1655 ISSN: 2075-4701 10.3390/met13101655 Vollhüter J. , Bezold A. , Karpstein N. , Köbrich M. , Spiecker E. , Göken M. , Neumeier S. :Strain Rate-Dependent Anomalous Work Hardening of a Single-Crystalline CoNi-Base Superalloy Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2023 )ISSN: 1073-5623 10.1007/s11661-023-06966-5 Vorlaufer N. , Josten J. , Carl S. , Göbel E. , Soegaard A. , Taccardi N. , Spiecker E. , Felfer P. :Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating Microscopy Research and Technique 87 2023 ), S. 476-483 ISSN: 1059-910X 10.1002/jemt.24448 Weiser M. , Olszta MJ. , Engelhard MH. , Zhu Z. , Schreiber DK. :Visualizing oxygen transport pathways during intergranular oxidation in Ni-Cr npj Materials Degradation 7 2023 ), Art.Nr.: 70 ISSN: 2397-2106 10.1038/s41529-023-00387-w Winczewski JP. , Zeiler S. , Gabel S. , Susarrey-Arce A. , Gardeniers JG. , Merle B. :Exploring the mechanical properties of additively manufactured carbon-rich zirconia 3D microarchitectures Materials & Design 232 2023 ), Art.Nr.: 112142 ISSN: 0264-1275 10.1016/j.matdes.2023.112142 Wolf M. , de Oliveira A. , Taccardi N. , Maisel S. , Heller M. , Khan Antara S. , Soegaard A. , Felfer P. , Görling A. , Haumann M. , Wasserscheid P. :Dry reforming of methane over gallium-based supported catalytically active liquid metal solutions Communications Chemistry 6 2023 ), Art.Nr.: 224 ISSN: 2399-3669 10.1038/s42004-023-01018-w Wurmshuber M. , Alfreider M. , Wurster S. , Burtscher M. , Pippan R. , Kiener D. :Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten Acta Materialia 250 2023 ), Art.Nr.: 118878 ISSN: 1359-6454 10.1016/j.actamat.2023.118878 Wurmshuber M. , Doppermann S. , Wurster S. , Jakob S. , Balooch M. , Alfreider M. , Schmuck K. , Bodlos R. , Romaner L. , Hosemann P. , Clemens H. , Maier-Kiener V. , Kiener D. :Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications International Journal of Refractory Metals & Hard Materials 111 2023 ), Art.Nr.: 106125 ISSN: 0263-4368 10.1016/j.ijrmhm.2023.106125 Wurmshuber M. , Wilmers J. , Kim J. , Oh SH. , Kiener D. :Lower hardness than strength: the auxetic composite microstructure of limpet tooth Acta Biomaterialia 166 2023 ), S. 447-453 ISSN: 1742-7061 10.1016/j.actbio.2023.04.035 https://www.sciencedirect.com/science/article/pii/S1742706123002350?via=ihub Xue F. , Bezold A. , Volz N. , Kirchmayer A. , Zenk C. , Neumeier S. , Göken M. :Influence of the γ′ Volume Fraction on the High-Temperature Strength of Single Crystalline Co–Al–W–Ta Superalloys Crystals 13 2023 ), Art.Nr.: 1095 ISSN: 2073-4352 10.3390/cryst13071095 Yang Z. , Huber F. , Krapf A. , Merle B. , Markl M. , Schmidt M. , Körner C. :Revealing bulk metallic glass crystallization kinetics during laser powder bed fusion by a combination of experimental and numerical methods Journal of Non-Crystalline Solids 619 2023 ), Art.Nr.: 122532 ISSN: 0022-3093 10.1016/j.jnoncrysol.2023.122532 Zauner L. , Steiner A. , Glechner T. , Bahr A. , Ott B. , Hahn R. , Wojcik T. , Hunold O. , Ramm J. , Kolozsvári S. , Polcik P. , Felfer P. , Riedl H. :Role of Si segregation in the structural, mechanical, and compositional evolution of high-temperature oxidation resistant Cr-Si-B2±z thin films Journal of Alloys and Compounds 944 2023 ), Art.Nr.: 169203 ISSN: 0925-8388 10.1016/j.jallcom.2023.169203
2022
Akhlaghi M. , Hock R. , Dallmann J. , Krapf A. , Merle B. , Hofsäss H. , Körner C. , Leineweber A. :Gaseous nitriding of Co-10 at% and -15 at% Cr alloys at 400 °C and 450 °C Journal of Alloys and Compounds 907 2022 )ISSN: 0925-8388 10.1016/j.jallcom.2022.164535 Arnoldt AR. , Schiffl A. , Höppel HW. , Oesterreicher JA. :Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082 Materials Characterization 191 2022 )ISSN: 1044-5803 10.1016/j.matchar.2022.112129 Atila A. , Ouldhnini Y. , Ouaskit S. , Hasnaoui A. :Atomistic insights into the mixed-alkali effect in phosphosilicate glasses Physical Review B 105 2022 ), Art.Nr.: 134101 ISSN: 0163-1829 10.1103/PhysRevB.105.134101 Bezold A. , Freund L. , Förner A. , Völkl J. , Huber LK. , Göken M. , Neumeier S. :Deformation Mechanisms in Compositionally Complex Polycrystalline CoNi-Base Superalloys: Influence of Temperature, Strain-Rate and Chemistry Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2022 )ISSN: 1073-5623 10.1007/s11661-022-06912-x Bezold A. , Stone HJ. , Rae CMF. , Neumeier S. :In Situ Investigation of TCP Phase Formation, Stress Relaxation and gamma/gamma ' Lattice Misfit Evolution in Fourth Generation Single Crystal Ni-Base Superalloys by X-Ray High Temperature Diffraction Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2022 )ISSN: 1073-5623 10.1007/s11661-022-06713-2 Bezold A. , Volz N. , Lenz M. , Karpstein N. , Zenk C. , Spiecker E. , Göken M. , Neumeier S. :Quantification of the temperature-dependent evolution of defect structures in a CoNi-base superalloy Acta Materialia 227 2022 ), Art.Nr.: 117702 ISSN: 1359-6454 10.1016/j.actamat.2022.117702 Bezold A. , Volz N. , Xue F. , Neumeier S. , Göken M. :Anomalous Work Hardening Behavior of a Single Crystalline Co-Base Superalloy Alloys 1 2022 ), S. 243-253-253 ISSN: 2674-063X 10.3390/alloys1030015 Bykova E. , Johansson E. , Bykov M. , Chariton S. , Fei H. , Ovsyannikov SV. , Aslandukova A. , Gabel S. , Holz H. , Merle B. , Alling B. , Abrikosov IA. , Smith JS. , Prakapenka VB. , Katsura T. , Dubrovinskaia N. , Goncharov AF. , Dubrovinsky L. :Novel Class of Rhenium Borides Based on Hexagonal Boron Networks Interconnected by Short B2Dumbbells Chemistry of Materials 34 2022 ), S. 8138-8152 ISSN: 0897-4756 10.1021/acs.chemmater.2c00520 Bykova E. , Ovsyannikov S. , Bykov M. , Yin Y. , Fedotenko T. , Holz H. , Gabel S. , Merle B. , Chariton S. , Prakapenka VB. , Dubrovinskaia N. , Goncharov AF. , Dubrovinsky L. :Synthesis, crystal structure, and properties of stoichiometric hard tungsten tetraboride, WB4 Journal of Materials Chemistry A 2022 )ISSN: 2050-7488 10.1039/d2ta02268k Diepold B. , Schunk C. , Kümmel F. , Fey T. , Prakash A. , Höppel HW. , Göken M. :Fatigue Life Optimized Layer Architecture of Ultrafine-Grained Al-Ti Laminates Under Bending Stresses Advanced Engineering Materials 2022 )ISSN: 1438-1656 10.1002/adem.202101143 Elitzer D. , Jäger S. , Höll C. , Baier D. , Varga R. , Zaeh MF. , Göken M. , Höppel HW. :Development of Microstructure and Mechanical Properties of TiAl6V4 Processed by Wire and Arc Additive Manufacturing Advanced Engineering Materials 2022 )ISSN: 1438-1656 10.1002/adem.202201025 Gabel S. , Giese S. , Webler R. , Neumeier S. , Göken M. :Microcantilever Fracture Tests of α-Cr Containing NiAl Bond Coats Advanced Engineering Materials 2022 )ISSN: 1438-1656 10.1002/adem.202101429 Gabel S. , Merle B. , Bitzek E. , Göken M. :A new method for microscale cyclic crack growth characterization from notched microcantilevers and application to single crystalline tungsten and a metallic glass Journal of Materials Research 2022 ), S. 2061-2072 ISSN: 0884-2914 10.1557/s43578-022-00618-x Gebhart DD. , Krapf A. , Gammer C. , Merle B. , Cordill MJ. :Linking through-thickness cracks in metallic thin films to in-situ electrical resistance peak broadening Scripta Materialia 212 2022 ), Art.Nr.: 114550 ISSN: 1359-6462 10.1016/j.scriptamat.2022.114550 Glechner T. , Bahr A. , Hahn R. , Wojcik T. , Heller M. , Kirnbauer A. , Ramm J. , Kolozsvari S. , Felfer P. , Riedl H. :High temperature oxidation resistance of physical vapor deposited Hf-Si-B-2 +/- z thin films Corrosion Science 205 2022 )ISSN: 0010-938X 10.1016/j.corsci.2022.110413 Göken M. , Hangen UD. :nanomech 5 International Journal of Materials Research 96 2022 ), S. 1225-1225 ISSN: 1862-5282 10.1515/ijmr-2005-0213 Hagen S. , Weiser M. , Abu-Khousa B. , Virtanen S. :Influence of the Co/Ni Ratio and Dendritic Segregations on the High-Temperature Oxidation Resistance of Multinary Co-Rich Superalloys at 850 °C and 1050 °C Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2022 )ISSN: 1073-5623 10.1007/s11661-022-06620-6 Hausmann D. , Freund L. , Solis C. , Giese S. , Göken M. , Gilles R. , Neumeier S. :Cracking during High-Temperature Deformation of a High-Strength Polycrystalline CoNi-Base Superalloy Metals 12 2022 )ISSN: 2075-4701 10.3390/met12091520 Haußmann L. , Burbaum B. , Stoehr B. , Förner A. , Freund L. , Göken M. , Neumeier S. :Crack-Free Welding of a Co-Base Superalloy with High γ' Precipitate Fraction Advanced Engineering Materials 2022 )ISSN: 1438-1656 10.1002/adem.202200609 Haußmann L. , Neumeier S. , Bresler J. , Keim S. , Pyczak F. , Göken M. :Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys Metals 12 2022 ), Art.Nr.: 752 ISSN: 2075-4701 10.3390/met12050752 Haußmann L. , Yoo B. , Jung C. , Ryou K. , Choi WS. , Haußmann L. , Yang S. , Boll T. , Neumeier S. , Choi PP. :Directed energy deposition of γ/γ' Co-Al-W superalloys Additive Manufacturing 60C7 - 103287 2022 )ISSN: 2214-7810 10.1016/j.addma.2022.103287 Hiremath P. , Melin S. , Bitzek E. , Olsson PA. :Effects of interatomic potential on fracture behaviour in single- and bicrystalline tungsten Computational Materials Science 207 2022 ), Art.Nr.: 111283 ISSN: 0927-0256 10.1016/j.commatsci.2022.111283 Höppel HW. , May J. , Eisenlohr P. , Göken M. :Strain-rate sensitivity of ultrafine-grained materials International Journal of Materials Research 96 2022 ), S. 566-571 ISSN: 1862-5282 10.3139/ijmr-2005-0101 Khanchandani H. , El-Zoka AA. , Kim SH. , Tezins U. , Vogel D. , Sturm A. , Raabe D. , Gault B. , Stephenson LT. :Laser-equipped gas reaction chamber for probing environmentally sensitive materials at near atomic scale PLoS ONE 17 2022 ), Art.Nr.: e0262543 ISSN: 1932-6203 10.1371/journal.pone.0262543 Krauß S. , Seynstahl A. , Tremmel S. , Meyer B. , Bitzek E. , Göken M. , Yokosawa T. , Zubiri BA. , Spiecker E. , Merle B. :Structural reorientation and compaction of porous MoS2 coatings during wear testing Wear 500-501 2022 ), Art.Nr.: 204339 ISSN: 0043-1648 10.1016/j.wear.2022.204339 Kümmel F. , Magnier A. , Wu T. , Niendorf T. , Höppel HW. :Residual Stresses in Ultrafine-Grained Laminated Metal Composites Analyzed by X-ray Diffraction and the Hole-Drilling Method Advanced Engineering Materials 2022 )ISSN: 1438-1656 10.1002/adem.202200274 Liang Z. , Neumeier S. , Rao Z. , Göken M. , Pyczak F. :CALPHAD informed design of multicomponent CoNiCr-based superalloys exhibiting large lattice misfit and high yield stress Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 854 2022 ), Art.Nr.: 143798 ISSN: 0921-5093 10.1016/j.msea.2022.143798 Liang Z. , Paul JDH. , Stark A. , Bezold A. , Neumeier S. , Göken M. , Pyczak F. :High-Temperature CoNi-Based Superalloys Strengthened by γ′-(Ni,Co)3(Cr,Al,Ti,X): The Effect of Refractory Elements Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2022 )ISSN: 1073-5623 10.1007/s11661-022-06795-y Lubauer J. , Ast J. , Göken M. , Merle B. , Lohbauer U. , Belli R. :Resistance-curve envelopes for dental lithium disilicate glass-ceramics Journal of the European Ceramic Society 2022 )ISSN: 0955-2219 10.1016/j.jeurceramsoc.2022.01.013 Luo N. , Galgon F. , Krauß S. , Morales LA. , Merle B. , Zenk C. , Körner C. :Microstructural evolution and mechanical properties in Zr–Cu–Al–Nb bulk metallic glass composites prepared by laser metal deposition Intermetallics 140 2022 ), Art.Nr.: 107393 ISSN: 0966-9795 10.1016/j.intermet.2021.107393 Luo N. , Huber F. , Ciftci N. , Wahl L. , Bezold A. , Neumeier S. , Uhlenwinkel V. , Travitzky N. , Schmidt M. , Zenk C. , Körner C. :Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 2022 ), Art.Nr.: 143405 ISSN: 0921-5093 10.1016/j.msea.2022.143405 Maier-Kiener V. , Lawrence SK. , Merle B. :30 Years of Oliver-Pharr: Then, Now and the Future of Nanoindentation JOM Journal of the Minerals, Metals and Materials Society 2022 )ISSN: 1047-4838 10.1007/s11837-022-05305-0 Meier MS. , Jones ME. , Felfer P. , Moody MP. , Haley D. :Extending Estimating Hydrogen Content in Atom Probe Tomography Experiments Where H 2 Molecule Formation Occurs Microscopy and Microanalysis 28 2022 ), S. 1231-1244 ISSN: 1431-9276 10.1017/S1431927621012332 Messing GL. , Bose S. , Göken M. , Morgan SE. :JMR early career scholars in materials science annual issue Journal of Materials Research 37 2022 ), S. 1-1 ISSN: 0884-2914 10.1557/s43578-021-00475-0 Oh SH. , Kim JK. , Liu Y. , Wurmshuber M. , Peng XL. , Seo J. , Jeong J. , Wang Z. , Wilmers J. , Soyarslan C. , Kim J. , Kittiwirayanon B. , Jeong J. , Kim HJ. , Huh YH. , Kiener D. , Bargmann S. , Gao H. :Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness Science Advances 8 2022 ), Art.Nr.: eadd4644 ISSN: 2375-2548 10.1126/sciadv.add4644 Ouldhnini Y. , Atila A. , Ouaskit S. , Hasnaoui A. :Density-Diffusion Relationship in Soda-Lime Phosphosilicate Journal of Non-Crystalline Solids 590 2022 ), Art.Nr.: 121665 ISSN: 0022-3093 10.1016/j.jnoncrysol.2022.121665 Schimmel S. , Salamon M. , Tomida D. , Neumeier S. , Ishiguro T. , Honda Y. , Chichibu SF. , Amano H. :High-Energy Computed Tomography as a Prospective Tool for In Situ Monitoring of Mass Transfer Processes inside High-Pressure Reactors-A Case Study on Ammonothermal Bulk Crystal Growth of Nitrides including GaN Materials 15 2022 ), S. 6165 ISSN: 1996-1944 10.3390/ma15176165 Schneider T. , Moffitt J. , Volz N. , Müller D. , Karl J. :Long-term effects of ilmenite on a micro-scale bubbling fluidized bed combined heat and power pilot plant for oxygen carrier aided combustion of wood Applied Energy 314 2022 ), S. 118953 ISSN: 0306-2619 10.1016/j.apenergy.2022.118953 Solís C. , Kirchmayer A. , da Silva I. , Kümmel F. , Mühlbauer S. , Beran P. , Gehrmann B. , Haghighat MH. , Neumeier S. , Gilles R. :Monitoring the precipitation of the hardening phase in the new VDM® Alloy 780 by in-situ high-temperature small-angle neutron scattering, neutron diffraction and complementary microscopy techniques Journal of Alloys and Compounds 928 2022 ), Art.Nr.: 167203 ISSN: 0925-8388 10.1016/j.jallcom.2022.167203 Stückler M. , Zálešák J. , Müller T. , Wurster S. , Weissitsch L. , Meier M. , Felfer P. , Gammer C. , Pippan R. , Bachmaier A. :Oxide-stabilized microstructure of severe plastically deformed CuCo alloys Journal of Alloys and Compounds 901 2022 ), Art.Nr.: 163616 ISSN: 0925-8388 10.1016/j.jallcom.2022.163616 Taali S. , Toroghinejad MR. , Kuglstatter M. , Höppel HW. :Grain boundary engineering in roll-bonded copper to overcome the strength-ductility dilemma Journal of Materials Research and Technology 17 2022 ), S. 3198-3204 ISSN: 2238-7854 10.1016/j.jmrt.2022.02.032 Thompson Y. , Zissel K. , Förner A. , Gonzalez-Gutierrez J. , Kukla C. , Neumeier S. , Felfer P. :Metal fused filament fabrication of the nickel-base superalloy IN 718 Journal of Materials Science 2022 )ISSN: 0022-2461 10.1007/s10853-022-06937-y Vaid A. , Wei D. , Bitzek E. , Nasiri S. , Zaiser M. :Pinning of extended dislocations in atomically disordered crystals Acta Materialia 236 2022 )ISSN: 1359-6454 10.1016/j.actamat.2022.118095 Wahlmann B. , Bandorf J. , Volz N. , Förner A. , Pröbstle J. , Multerer K. , Göken M. , Markl M. , Neumeier S. , Körner C. :Numerical Design of CoNi-Base Superalloys With Improved Casting Structure Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2022 )ISSN: 1073-5623 10.1007/s11661-022-06870-4 Wallis D. , Harris J. , Böhm C. , Wang D. , Zavattieri P. , Feldner P. , Merle B. , Pipich V. , Hurle K. , Leupold S. , Hansen LN. , Marin F. , Wolf S. :Erratum: Progressive changes in crystallographic textures of biominerals generate functionally graded ceramics (Mater. Adv. (2022) DOI: 10.1039/d1ma01031j) Materials Advances 3 2022 ), S. 2598- ISSN: 2633-5409 10.1039/d2ma90020c Webler R. , Baranova P. , Karewar S. , Möller J. , Neumeier S. , Göken M. , Bitzek E. :On the influence of Al-concentration on the fracture toughness of NiAl: Microcantilever fracture tests and atomistic simulations Acta Materialia 234 2022 ), Art.Nr.: 117996 ISSN: 1359-6454 10.1016/j.actamat.2022.117996 Winczewski J. , Herrera M. , Cabriel C. , Izeddin I. , Gabel S. , Merle B. , Susarrey Arce A. , Gardeniers H. :Additive Manufacturing of 3D Luminescent ZrO2:Eu3+ Architectures Advanced Optical Materials 2022 )ISSN: 2195-1071 10.1002/adom.202102758 Wurmshuber M. , Balooch M. , Huang X. , Hosemann P. , Kiener D. :Helium-induced swelling and mechanical property degradation in ultrafine-grained W and W-Cu nanocomposites for fusion applications Scripta Materialia 213 2022 ), Art.Nr.: 114641 ISSN: 1359-6462 10.1016/j.scriptamat.2022.114641 Wurmshuber M. , Burtscher M. , Doppermann S. , Bodlos R. , Scheiber D. , Romaner L. , Kiener D. :Mechanical performance of doped W–Cu nanocomposites Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 857 2022 ), Art.Nr.: 144102 ISSN: 0921-5093 10.1016/j.msea.2022.144102 Wurmshuber M. , Jakob S. , Doppermann S. , Wurster S. , Bodlos R. , Romaner L. , Maier-Kiener V. , Kiener D. :Tuning mechanical properties of ultrafine-grained tungsten by manipulating grain boundary chemistry Acta Materialia 232 2022 ), Art.Nr.: 117939 ISSN: 1359-6454 10.1016/j.actamat.2022.117939 Yang Z. , Wang H. , Krauß S. , Huber F. , Merle B. , Schmidt M. , Markl M. , Körner C. :Evolution of an industrial-grade Zr-based bulk metallic glass during multiple laser beam melting Journal of Non-Crystalline Solids 589 2022 ), Art.Nr.: 121649 ISSN: 0022-3093 10.1016/j.jnoncrysol.2022.121649 Yoo B. , Jung C. , Ryou K. , Choi WS. , Haußmann L. , Yang S. , Boll T. , Neumeier S. , Choi PP. :Directed energy deposition of gamma/gamma' Co-Al-W superalloys Additive Manufacturing 60 2022 )ISSN: 2214-7810 10.1016/j.addma.2022.103287
2021
Aschauer E. , Wojcik T. , Polcik P. , Hunold O. , Arndt M. , Dalbauer V. , Mayrhofer PH. , Felfer P. , Riedl H. :Ultra-high oxidation resistance of nano-structured thin films Materials & Design 201 2021 ), Art.Nr.: 109499 ISSN: 0264-1275 10.1016/j.matdes.2021.109499 Bezold A. , Volz N. , Lenz M. , Zenk C. , Spiecker E. , Mills MJ. , Göken M. , Neumeier S. :Yielding behavior of a single-crystalline γ'-strengthened Co-Ti-Cr superalloy Scripta Materialia 200 2021 ), S. 113928 ISSN: 1359-6462 10.1016/j.scriptamat.2021.113928 Biermann H. , Vinogradov A. , Hartmann O. , Hartmann O. :Fatigue damage evolution in a particulate-reinforced metal matrix composite determined by acoustic emission and compliance method International Journal of Materials Research 93 2021 ), S. 719-723 ISSN: 1862-5282 10.3139/ijmr-2002-0121 Burtscher M. , Zhao M. , Kappacher J. , Leitner A. , Wurmshuber M. , Pfeifenberger M. , Maier-Kiener V. , Kiener D. :High-temperature nanoindentation of an advanced nano-crystalline W/Cu composite Nanomaterials 11 2021 ), Art.Nr.: 2951 ISSN: 2079-4991 10.3390/nano11112951 Chauraud D. , Durinck J. , Vernisse L. , Smalley S. , Drouet M. , Coupeau C. :External stress as a way to control Au(111) reconstruction Surface Science 714 2021 ), Art.Nr.: 121908 ISSN: 0039-6028 10.1016/j.susc.2021.121908 Diepold B. , Neumeier S. , Meermeier A. , Höppel HW. , Sebald T. , Göken M. :Temperature-Dependent Dynamic Strain Aging in Selective Laser Melted 316L Advanced Engineering Materials 2021 )ISSN: 1438-1656 10.1002/adem.202001501 Diepold B. , Palm MS. , Wimmer A. , Sebald T. , Höppel HW. , Neumeier S. , Göken M. :Rotating Scan Strategy Induced Anisotropic Microstructural and Mechanical Behavior of Selective Laser Melted Materials and Their Reduction by Heat Treatments Advanced Engineering Materials 2021 )ISSN: 1438-1656 10.1002/adem.202100622 Feldner P. , Merle B. , Göken M. :Breakdown of the superplastic deformation behavior of heterogeneous nanomaterials at small length scales Materials Research Letters 9 2021 ), S. 41-49 ISSN: 2166-3831 10.1080/21663831.2020.1818323 https://www.tandfonline.com/doi/pdf/10.1080/21663831.2020.1818323 Felfer P. , Ott B. , Monajem M. , Dalbauer V. , Heller M. , Josten J. , Macaulay C. :An Atom Probe with Ultra-Low Hydrogen Background Microscopy and Microanalysis 2021 )ISSN: 1431-9276 10.1017/S1431927621013702 Förner A. , Vollhüter J. , Hausmann D. , Arnold C. , Felfer P. , Neumeier S. , Göken M. :Nanostructuring of Nb-Si-Cr Alloys by Electron Beam Melting to Improve the Mechanical Properties and the Oxidation Behavior Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2021 )ISSN: 1073-5623 10.1007/s11661-021-06516-x Gaag T. , Ritter N. , Peters A. , Volz N. , Gruber D. , Neumeier S. , Zenk C. , Körner C. :Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys Metals 11 2021 ), Art.Nr.: 1707 ISSN: 2075-4701 10.3390/met11111707 Gabel S. , Giese S. , Merle B. , Sprenger I. , Heilmaier M. , Neumeier S. , Bitzek E. , Göken M. :Microcantilever Fracture Tests on Eutectic NiAl–Cr(Mo) In Situ Composites Advanced Engineering Materials 2021 )ISSN: 1438-1656 10.1002/adem.202001464 https://onlinelibrary.wiley.com/doi/epdf/10.1002/adem.202001464 Gonzalez-Gutierrez J. , Thompson Y. , Handl D. , Cano S. , Schuschnigg S. , Felfer P. , Kukla C. , Holzer C. , Burkhardt C. :Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness Materials Letters 283 2021 )ISSN: 0167-577X 10.1016/j.matlet.2020.128909 Gsellmann M. , Klünsner T. , Mitterer C. , Krobath M. , Wurmshuber M. , Leitner H. , Ecker W. , Marsoner S. , Maier-Kiener V. , Kiener D. , Ressel G. :Strength ranking for interfaces between a TiN hard coating and microstructural constituents of high speed steel determined by micromechanical testing Materials & Design 204 2021 ), Art.Nr.: 109690 ISSN: 0264-1275 10.1016/j.matdes.2021.109690 Hausmann D. , Förner A. , Pröbstle M. , Huenert D. , Felfer P. , Göken M. , Neumeier S. :Correlation Between Local Chemical Composition and Formation of Different Types of Ordered Phases in the Polycrystalline Nickel-Base Superalloy A718Plus Advanced Engineering Materials 2021 )ISSN: 1438-1656 10.1002/adem.202100558 Haußmann L. , Rehman HU. , Matschkal D. , Göken M. , Neumeier S. :Solid solution strengthening of Mo, Re, Ta and W in Ni during high-temperature creep Metals 11 2021 ), Art.Nr.: 1909 ISSN: 2075-4701 10.3390/met11121909 Josten J. , Felfer P. :Atom Probe Analysis of Nanoparticles through Pick and Coat Sample Preparation Microscopy and Microanalysis 2021 )ISSN: 1431-9276 10.1017/S1431927621000465 Kohlhepp M. , Uggowitzer PJ. , Hummel M. , Höppel HW. :Formation of Die Soldering and the Influence of Alloying Elements on the Intermetallic Interface Materials 14 2021 ), S. 1580 ISSN: 1996-1944 10.3390/ma14071580 Konrad J. , Meißner RH. , Bitzek E. , Zahn D. :A Molecular Simulation Approach to Bond Reorganization in Epoxy Resins: From Curing to Deformation and Fracture ACS Polymers Au 2021 ), Art.Nr.: acspolymersau.1c00016 ISSN: 2694-2453 10.1021/acspolymersau.1c00016 Kümmel F. , Höppel HW. , Göken M. :Ultrafine-Grained Laminated Metal Composites: A New Material Class for Tailoring Cyclically Stressed Components Advanced Engineering Materials 2021 )ISSN: 1438-1656 10.1002/adem.202100070 Kümmel F. , Kirchmayer A. , Solís C. , Hofmann M. , Neumeier S. , Gilles R. :Deformation mechanisms in Ni-based superalloys at room and elevated temperatures studied by in Situ neutron diffraction and electron microscopy Metals 11 2021 ), Art.Nr.: 719 ISSN: 2075-4701 10.3390/met11050719 Liang Z. , Göken M. , Lorenz U. , Neumeier S. , Oehring M. , Pyczak F. , Stark A. , Wang L. :Influence of small amounts of Si and Cr on the high temperature oxidation behavior of novel cobalt base superalloys Corrosion Science 184 2021 ), Art.Nr.: 109388 ISSN: 0010-938X 10.1016/j.corsci.2021.109388 Liang Z. , Pyczak F. , Stark A. , Rao Z. , Neumeier S. , Göken M. :Breaking the continuity of the Al2O3 oxide scale by additions of Cr in Co-Al-W-based superalloys Corrosion Science 189 2021 ), Art.Nr.: 109594 ISSN: 0010-938X 10.1016/j.corsci.2021.109594 Liebig JP. , Mackovic M. , Spiecker E. , Göken M. , Merle B. :Grain boundary mediated plasticity: A blessing for the ductility of metallic thin films? Acta Materialia 215 2021 ), Art.Nr.: 117079 ISSN: 1359-6454 10.1016/j.actamat.2021.117079 https://www.sciencedirect.com/science/article/pii/S1359645421004596/pdfft?isDTMRedir=true&download=true Macauley C. , Heller M. , Rausch A. , Kümmel F. , Felfer P. :A versatile cryo-transfer system, connecting cryogenic focused ion beam sample preparation to atom probe microscopy PLoS ONE 16 2021 ), Art.Nr.: e0245555 ISSN: 1932-6203 10.1371/journal.pone.0245555 Marian M. , Feile K. , Rothammer B. , Bartz M. , Wartzack S. , Seynstahl A. , Tremmel S. , Krauß S. , Merle B. , Boehm T. , Wang B. , Wyatt BC. , Anasori B. , Rosenkranz A. :Ti3C2Tx Solid Lubricant Coatings in Rolling Bearings with Remarkable Performance beyond State-of-the-Art Materials Applied Materials Today 25 2021 ), S. 1-9 ISSN: 2352-9407 10.1016/j.apmt.2021.101202 https://www.sciencedirect.com/science/article/pii/S2352940721002663?dgcid=coauthor Matschkal D. , Tuengerthal P. , Lamm S. , Göken M. , Höppel HW. , Felfer P. :Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography Metals 11 2021 ), Art.Nr.: 1727 ISSN: 2075-4701 10.3390/met11111727 Merle B. , Maier-Kiener V. , Rupert TJ. , Pharr GM. :Current trends in nanomechanical testing research Journal of Materials Research 2021 )ISSN: 0884-2914 10.1557/s43578-021-00280-9 https://link.springer.com/content/pdf/10.1557/s43578-021-00280-9.pdf Misra A. , Göken M. , Mara NA. , Beyerlein IJ. :Hierarchical and heterogeneous multiphase metallic nanomaterials and laminates Mrs Bulletin 2021 )ISSN: 0883-7694 10.1557/s43577-021-00059-7 Morgado FF. , Katnagallu S. , Freysoldt C. , Klaes B. , Vurpillot F. , Neugebauer J. , Raabe D. , Neumeier S. , Gault B. , Stephenson LT. :Corrigendum to Revealing atomic-scale vacancy-solute interaction in nickel(Scripta Materialia (2021) 203, (114036) (S135964622100316X), (10.1016/j.scriptamat.2021.114036)) Scripta Materialia 205 2021 ), Art.Nr.: 114213 ISSN: 1359-6462 10.1016/j.scriptamat.2021.114213 Morgado FF. , Katnagallu S. , Freysoldt C. , Klaes B. , Vurpillot F. , Neugebauer J. , Raabe D. , Neumeier S. , Gault B. , Stephenson LT. :Revealing atomic-scale vacancy-solute interaction in nickel Scripta Materialia 203 2021 ), Art.Nr.: 114036 ISSN: 1359-6462 10.1016/j.scriptamat.2021.114036 Mukhopadhyay S. , Sriram H. , Zenk C. , Didomizio R. , Detor AJ. , Hayes RW. , Viswanathan GB. , Wang Y. , Mills MJ. :Creep behavior of compact γ′-γ′′ coprecipitation strengthened in718-variant superalloy Metals 11 2021 ), Art.Nr.: 1897 ISSN: 2075-4701 10.3390/met11121897 Neumeier S. , Bresler J. , Zenk C. , Haußmann L. , Stark A. , Pyczak F. , Göken M. :Partitioning Behavior of Nb, Ta, and Zr in Fully Lamellar gamma/alpha(2) Titanium Aluminides and Its Effect on the Lattice Misfit and Creep Behavior Advanced Engineering Materials 2021 )ISSN: 1438-1656 10.1002/adem.202100156 Neumeier S. , Pyczak F. , Göken M. :The temperature dependent lattice misfit of rhenium and ruthenium containing nickel-base superalloys – Experiment and modelling Materials and Design 198 2021 ), Art.Nr.: 109362 ISSN: 0261-3069 10.1016/j.matdes.2020.109362 Oh HS. , Odbadrakh K. , Ikeda Y. , Mu S. , Körmann F. , Sun CJ. , Ahn HS. , Yoon KN. , Ma D. , Tasan CC. , Egami T. , Park ES. :Element-resolved local lattice distortion in complex concentrated alloys: An observable signature of electronic effects Acta Materialia 216 2021 ), Art.Nr.: 117135 ISSN: 1359-6454 10.1016/j.actamat.2021.117135 Ouldhnini Y. , Atila A. , Ouaskit S. , Hasnaoui A. :Atomistic insights into the structure and elasticity of densified 45S5 bioactive glasses Physical Chemistry Chemical Physics 2021 )ISSN: 1463-9076 10.1039/d1cp02192c Pohl P. , Kümmel F. , Schunk C. , Serrano-Munoz I. , Markötter H. , Göken M. , Höppel HW. :About the role of interfaces on the fatigue crack propagation in laminated metallic composites Materials 14 2021 ), Art.Nr.: 2564 ISSN: 1996-1944 10.3390/ma14102564 Preiß E. , Merle B. , Xiao Y. , Gannott F. , Liebig JP. , Wheeler JM. , Göken M. :Applicability of focused Ion beam (FIB) milling with gallium, neon, and xenon to the fracture toughness characterization of gold thin films Journal of Materials Research 2021 )ISSN: 0884-2914 10.1557/s43578-020-00045-w https://link.springer.com/content/pdf/10.1557/s43578-020-00045-w.pdf Pugsley V. , Korn G. , Luyckx S. , Sockel HG. :On localised corrosive attack, stress corrosion cracking and corrosion fatigue effects in a hardmetal cutting-tool material International Journal of Materials Research 93 2021 ), S. 745-749 ISSN: 1862-5282 10.3139/ijmr-2002-0125 Raman N. , Wolf M. , Heller M. , Heene-Würl N. , Taccardi N. , Haumann M. , Felfer P. , Wasserscheid P. :GaPt Supported Catalytically Active Liquid Metal Solution Catalysis for Propane Dehydrogenation-Support Influence and Coking Studies ACS Catalysis 2021 ), S. 13423-13433 ISSN: 2155-5435 10.1021/acscatal.1c01924 Rothammer B. , Marian M. , Neusser K. , Bartz M. , Böhm T. , Krauß S. , Schroeder S. , Uhler M. , Thiele S. , Merle B. , Kretzer JP. , Wartzack S. :Amorphous Carbon Coatings for Total Knee Replacements—Part II: Tribological Behavior Polymers 13 2021 ), S. 1 - 25 ISSN: 2073-4360 10.3390/polym13111880 https://www.archiv.mfk.tf.fau.de?file=pubmfk_60bb59ba4432e Rothammer B. , Neusser K. , Marian M. , Bartz M. , Krauß S. , Böhm T. , Thiele S. , Merle B. , Detsch R. , Wartzack S. :Amorphous Carbon Coatings for Total Knee Replacements—Part I: Deposition, Cytocompatibility, Chemical and Mechanical Properties Polymers 13 2021 ), S. 1 - 23 ISSN: 2073-4360 10.3390/polym13121952 https://www.archiv.mfk.tf.fau.de?file=pubmfk_60c364643981f Sadl M. , Condurache O. , Bencan A. , Dragomir M. , Prah U. , Malic B. , Deluca M. , Eckstein U. , Hausmann D. , Khansur NH. , Webber KG. , Ursic H. :Energy-storage-efficient 0.9Pb(Mg1/3Nb2/3)O3–0.1PbTiO3 thick films integrated directly onto stainless steel Acta Materialia 221 2021 ), Art.Nr.: 117403 ISSN: 1359-6454 10.1016/j.actamat.2021.117403 Seynstahl A. , Krauß S. , Bitzek E. , Meyer B. , Merle B. , Tremmel S. :Microstructure, mechanical properties and tribological behavior of magnetron-sputtered mos2 solid lubricant coatings deposited under industrial conditions Coatings 11 2021 ), Art.Nr.: 455 ISSN: 2079-6412 10.3390/coatings11040455 Sommerschuh M. , Wirth J. , Englisch S. , Przybilla T. , Apeleo Zubiri B. , Pistor J. , Merle B. , Körner C. , Göken M. , Spiecker E. :A scale-bridging study of the influence of TCP phases on the mechanical properties of an additive manufactured Ni-base superalloy combining microcompression testing, X-ray nanotomography and TEM Microscopy and Microanalysis 27 2021 ), S. 938-942 ISSN: 1431-9276 10.1017/S1431927621003603 Tayebi Arasteh S. , Monajem M. , Christlein V. , Heinrich P. , Nicolao A. , Boldaji HN. , Lotfinia M. , Evert S. :How Will Your Tweet Be Received? Predicting the Sentiment Polarity of Tweet Replies IEEE 15th International Conference on Semantic Computing (ICSC) (Laguna Hills, CA 27. Januar 2021 - 29. Januar 2021 )In: IEEE (Hrsg.): 2021 IEEE 15th International Conference on Semantic Computing (ICSC) 2021 10.1109/ICSC50631.2021.00068 https://ieeexplore.ieee.org/document/9364527 Thompson Y. , Polzer M. , Gonzalez-Gutierrez J. , Kasian O. , Heckl JP. , Dalbauer V. , Kukla C. , Felfer P. :Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium Advanced Engineering Materials 2021 )ISSN: 1438-1656 10.1002/adem.202100380 Volz N. , Xue F. , Bezold A. , Zenk C. , Fries SG. , Schreuer J. , Neumeier S. , Göken M. :Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2021 )ISSN: 1073-5623 10.1007/s11661-021-06353-y Volz N. , Xue F. , Zenk C. , Bezold A. , Gabel S. , Subramanyam AP. , Drautz R. , Hammerschmidt T. , Makineni SK. , Gault B. , Göken M. , Neumeier S. :Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy Acta Materialia 214 2021 ), S. 117019 ISSN: 1359-6454 10.1016/j.actamat.2021.117019 Volz N. , Zenk C. , Karpstein N. , Lenz M. , Spiecker E. , Göken M. , Neumeier S. :Creep properties and deformation mechanisms of single-crystalline gamma '-strengthened superalloys in dependence of the Co/Ni ratio Philosophical Magazine 2021 )ISSN: 1478-6435 10.1080/14786435.2021.2017051 Wahl L. , Weichelt M. , Goik P. , Schmiedeke S. , Travitzky N. :Robocasting of reaction bonded silicon carbide/silicon carbide platelet composites Ceramics International 47 2021 ), S. 9736-9744 ISSN: 0272-8842 10.1016/j.ceramint.2020.12.113 Wallis D. , Harris J. , Böhm C. , Wang D. , Zavattieri P. , Feldner P. , Merle B. , Pipich V. , Hurle K. , Leupold S. , Hansen LN. , Marin F. , Wolf S. :Progressive changes in crystallographic textures of biominerals generate functionally graded ceramics Materials Advances 2021 )ISSN: 2633-5409 10.1039/d1ma01031j Wang J. , Kang E. , Sultan U. , Merle B. , Inayat A. , Graczykowski B. , Fytas G. , Vogel N. :Influence of Surfactant-Mediated Interparticle Contacts on the Mechanical Stability of Supraparticles Journal of Physical Chemistry C 2021 )ISSN: 1932-7447 10.1021/acs.jpcc.1c06839 Wang J. , Schwenger J. , Feldner P. , Ströbel A. , Herre P. , Romeis S. , Peukert W. , Merle B. , Vogel N. :Mechanics of colloidal supraparticles under compression Science Advances 7 2021 ), Art.Nr.: eabj0954 ISSN: 2375-2548 10.1126/sciadv.abj0954 Weikert T. , Wartzack S. , Baloglu MV. , Willner K. , Gabel S. , Merle B. , Pineda F. , Walczak M. , Marian M. , Rosenkranz A. , Tremmel S. :Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation Surface & Coatings Technology 407 2021 ), Art.Nr.: 126769 ISSN: 0257-8972 10.1016/j.surfcoat.2020.126769 http://www.sciencedirect.com/science/article/pii/S0257897220314390 Wurmshuber M. , Frazer D. , Balooch M. , Issa I. , Bachmaier A. , Hosemann P. , Kiener D. :The effect of grain size on bubble formation and evolution in helium-irradiated Cu-Fe-Ag Materials Characterization 171 2021 ), Art.Nr.: 110822 ISSN: 1044-5803 10.1016/j.matchar.2020.110822 Xie Z. , Chauraud D. , Bitzek E. , Korte-Kerzel S. , Guénolé J. :Laves phase crystal analysis (LaCA): Atomistic identification of lattice defects in C14 and C15 topologically close-packed phases Journal of Materials Research 2021 )ISSN: 0884-2914 10.1557/s43578-021-00237-y Zhao M. , Schlueter K. , Wurmshuber M. , Reitgruber M. , Kiener D. :Open-cell tungsten nanofoams: Scaling behavior and structural disorder dependence of Young's modulus and flow strength Materials & Design 197 2021 ), Art.Nr.: 109187 ISSN: 0264-1275 10.1016/j.matdes.2020.109187 Zhu Y. , Ameyama K. , Anderson PM. , Beyerlein IJ. , Gao H. , Kim HS. , Lavernia E. , Mathaudhu S. , Mughrabi H. , Ritchie RO. , Tsuji N. , Zhang X. , Wu X. :Heterostructured materials: superior properties from hetero-zone interaction Materials Research Letters 9 2021 ), S. 1-31 ISSN: 2166-3831 10.1080/21663831.2020.1796836
2020
Atila A. , Kbirou M. , Ouaskit S. , Hasnaoui A. :On the presence of nanoscale heterogeneity in Al70Ni15Co15 metallic glass under pressure Journal of Non-Crystalline Solids 550 2020 ), Art.Nr.: 120381 ISSN: 0022-3093 10.1016/j.jnoncrysol.2020.120381 Bach J. , Stoiber M. , Schindler L. , Höppel HW. , Göken M. :Deformation mechanisms and strain rate sensitivity of bimodal and ultrafine-grained copper Acta Materialia 186 2020 ), S. 363-373 ISSN: 1359-6454 10.1016/j.actamat.2019.12.044 Bezold A. , Volz N. , Xue F. , Zenk CH. , Neumeier S. , Göken M. :On the Precipitation-Strengthening Contribution of the Ta-Containing Co3(Al,W)-Phase to the Creep Properties of γ/γ′ Cobalt-Base Superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 51 2020 ), S. 1567-1574 ISSN: 1073-5623 10.1007/s11661-020-05626-2 Brandt S. , Faßbender ML. , Klemd R. , Macauley C. , Felfer P. , Haase K. :Cumulate olivine: A novel host for heavy rare earth element mineralization Geology 49 2020 )ISSN: 0091-7613 10.1130/G48417.1 Cautaerts N. , Delville R. , Stergar E. , Pakarinen J. , Verwerft M. , Yang Y. , Hofer C. , Schnitzer R. , Lamm S. , Felfer P. , Schryvers D. :The role of Ti and TiC nanoprecipitates in radiation resistant austenitic steel: A nanoscale study Acta Materialia 197 2020 ), S. 184-197 ISSN: 1359-6454 10.1016/j.actamat.2020.07.022 Diehl M. , Wang D. , Liu C. , Rezaei Mianroodi J. , Han F. , Ma D. , Kok PJ. , Roters F. , Shanthraj P. :Solving Material Mechanics and Multiphysics Problems of Metals with Complex Microstructures Using DAMASK—The Düsseldorf Advanced Material Simulation Kit Advanced Engineering Materials 2020 ), Art.Nr.: 1901044 ISSN: 1438-1656 10.1002/adem.201901044 Diepold B. , Vorlaufer N. , Neumeier S. , Gartner T. , Göken M. :Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718 International Journal of Minerals, Metallurgy and Materials 27 2020 ), S. 640-648 ISSN: 1674-4799 10.1007/s12613-020-1991-6 Fuger C. , Schwartz B. , Wojcik T. , Moraes V. , Weiss M. , Limbeck A. , Macauley C. , Hunold O. , Polcik P. , Primetzhofer D. , Felfer P. , Mayrhofer PH. , Riedl H. :Influence of Ta on the oxidation resistance of WB2−z coatings Journal of Alloys and Compounds 2020 ), Art.Nr.: 158121 ISSN: 0925-8388 10.1016/j.jallcom.2020.158121 Förner A. , Giese S. , Arnold C. , Felfer P. , Körner C. , Neumeier S. , Göken M. :Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting Scientific Reports 10 2020 ), Art.Nr.: 15153 ISSN: 2045-2322 10.1038/s41598-020-72093-5 Gabel S. , Merle B. :Small-scale high-cycle fatigue testing by dynamic microcantilever bending MRS Communications 2020 )ISSN: 2159-6859 10.1557/mrc.2020.31 https://link.springer.com/content/pdf/10.1557/mrc.2020.31.pdf Giese S. , Bezold A. , Pröbstle M. , Heckl A. , Neumeier S. , Göken M. :The Importance of Diffusivity and Partitioning Behavior of Solid Solution Strengthening Elements for the High Temperature Creep Strength of Ni-Base Superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2020 )ISSN: 1073-5623 10.1007/s11661-020-06028-0 Gulden F. , Reinhold B. , Gramstat S. , Stich A. , Tetzlaff U. , Höppel HW. :Investigation of the run-in and corrosion behavior of a PEO-coated aluminum brake disc 10th International Munich Chassis Symposium (Chassis.Tech Plus) (Munich In: 10TH INTERNATIONAL MUNICH CHASSIS SYMPOSIUM 2019 (CHASSIS.TECH PLUS) , WIESBADEN 2020 10.1007/978-3-658-26435-2_43 Guénolé J. , Nöhring WG. , Vaid A. , Houlle F. , Xie Z. , Prakash A. , Bitzek E. :Assessment and optimization of the fast inertial relaxation engine (FIRE) for energy minimization in atomistic simulations and its implementation in LAMMPS Computational Materials Science 175 2020 ), Art.Nr.: 109584 ISSN: 0927-0256 10.1016/j.commatsci.2020.109584 Hausmann D. , Solís C. , Freund L. , Volz N. , Heinemann A. , Göken M. , Gilles R. , Neumeier S. :Enhancing the high-temperature strength of a Co-base superalloy by optimizing the γ/γ' microstructure Metals 10 2020 ), Art.Nr.: 321 ISSN: 2075-4701 10.3390/met10030321 Haußmann L. , Neumeier S. , Kolb M. , Ast J. , Mohanty G. , Michler J. , Göken M. :Local Mechanical Properties at the Dendrite Scale of Ni-Based Superalloys Studied by Advanced High Temperature Indentation Creep and Micropillar Compression Tests 14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA 12. September 2021 - 16. September 2021 )In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (Hrsg.): Minerals, Metals and Materials Series 2020 10.1007/978-3-030-51834-9_26 He J. , Zenk C. , Zhou X. , Neumeier S. , Raabe D. , Gault B. , Makineni SK. :On the atomic solute diffusional mechanisms during compressive creep deformation of a Co-Al-W-Ta single crystal superalloy Acta Materialia 184 2020 ), S. 86-99 ISSN: 1359-6454 10.1016/j.actamat.2019.11.035 Höppel HW. , Westermeyer M. , Kümmel F. , Göken M. :The Role of Interfaces on the Deformation Mechanisms in Bimodal Al Laminates Produced by Accumulative Roll Bonding Advanced Engineering Materials 2020 )ISSN: 1438-1656 10.1002/adem.202000145 Kabir A. , Espineira-Cachaza M. , Fiordaliso EM. , Ke D. , Grasso S. , Merle B. , Esposito V. :Effect of cold sintering process (CSP) on the electro-chemo-mechanical properties of Gd-doped ceria (GDC) Journal of the European Ceramic Society 40 2020 ), S. 5612-5618 ISSN: 0955-2219 10.1016/j.jeurceramsoc.2020.06.010 Kabir A. , Kyu Han J. , Merle B. , Esposito V. :The role of oxygen defects on the electro-chemo-mechanical properties of highly defective gadolinium doped ceria Materials Letters 266 2020 ), Art.Nr.: 127490 ISSN: 0167-577X 10.1016/j.matlet.2020.127490 Kalsar R. , Yadav D. , Sharma A. , Brokmeier HG. , May J. , Höppel HW. , Skrotzki W. , Suwas S. :Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 797 2020 ), Art.Nr.: 140088 ISSN: 0921-5093 10.1016/j.msea.2020.140088 Kirchmayer A. , Lyu H. , Pröbstle M. , Houlle F. , Förner A. , Huenert D. , Göken M. , Felfer P. , Bitzek E. , Neumeier S. :Combining Experiments and Atom Probe Tomography-Informed Simulations on γ′ Precipitation Strengthening in the Polycrystalline Ni-Base Superalloy A718Plus Advanced Engineering Materials 2020 )ISSN: 1438-1656 10.1002/adem.202000149 Krauß S. , Schieß T. , Göken M. , Merle B. :Revealing the local fatigue behavior of bimodal copper laminates by micropillar fatigue tests Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 788 2020 ), Art.Nr.: 139502 ISSN: 0921-5093 10.1016/j.msea.2020.139502 Kubacka D. , Eggeler Y. , Volz N. , Neumeier S. , Spiecker E. :Using Rapid Thermal Annealing for Studying Early Stages of High-Temperature Oxidation of Superalloys 10.1007/978-3-030-51834-9_74 Lee S. , Vaid A. , Im J. , Kim B. , Prakash A. , Guenole J. , Kiener D. , Bitzek E. , Oh SH. :In-situ observation of the initiation of plasticity by nucleation of prismatic dislocation loops Nature Communications 11 2020 ), Art.Nr.: 2367 ISSN: 2041-1723 10.1038/s41467-020-15775-y Lenz M. , Wu M. , He J. , Makineni SK. , Gault B. , Raabe D. , Neumeier S. , Spiecker E. :Atomic Structure and Chemical Composition of Planar Fault Structures in Co-Base Superalloys 14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA 12. September 2021 - 16. September 2021 )In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (Hrsg.): Minerals, Metals and Materials Series 2020 10.1007/978-3-030-51834-9_90 Lepple M. , Ushakov SV. , Lilova K. , Macauley C. , Fernandez AN. , Levi CG. , Navrotsky A. :Thermochemistry and phase stability of the polymorphs of yttrium tantalate, YTaO4 Journal of the European Ceramic Society 2020 )ISSN: 0955-2219 10.1016/j.jeurceramsoc.2020.10.039 Löffl C. , Saage H. , Göken M. :The influence of near service environmental conditions on the corrosion and LCF behaviour of a beta-stabilized γ-TiAl alloy Corrosion Science 175 2020 ), Art.Nr.: 108885 ISSN: 0010-938X 10.1016/j.corsci.2020.108885 Marian M. , Song GC. , Wang B. , Fuenzalida VM. , Krauß S. , Merle B. , Tremmel S. , Wartzack S. , Yu J. , Rosenkranz A. :Effective usage of 2D MXene nanosheets as solid lubricant – Influence of contact pressure and relative humidity Applied Surface Science 531 2020 ), S. 1-10 ISSN: 0169-4332 10.1016/j.apsusc.2020.147311 https://www.sciencedirect.com/science/article/pii/S0169433220320687?dgcid=coauthor Marti N. , Reller C. , Macauley C. , Löffler M. , Reichert A. , Reichbauer T. , Vetter KM. , Schmid B. , Mclaughlin D. , Leidinger P. , Reinisch D. , Vogl C. , Mayrhofer K. , Katsounaros I. , Schmid G. :Ag2Cu2O3- a catalyst template material for selective electroreduction of CO to C(2+)products Energy and Environmental Science 13 2020 ), S. 2993-3006 ISSN: 1754-5692 10.1039/d0ee01100b Merle B. , Higgins WH. , Pharr GM. :Extending the range of constant strain rate nanoindentation testing Journal of Materials Research 2020 )ISSN: 0884-2914 10.1557/jmr.2019.408 https://link.springer.com/content/pdf/10.1557/jmr.2019.408.pdf Mughrabi H. :Revisiting “Steady-State” Monotonic and Cyclic Deformation: Emphasizing the Quasi-Stationary State of Deformation Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2020 )ISSN: 1073-5623 10.1007/s11661-019-05618-x Penk D. , Müller J. , Felfer P. , Grosso R. , Stamminger M. :Visualization Aided Interface Reconstruction VMV 2020, 25th International Symposium on Vision, Modeling, and Visualization (Tübingen 28. September 2020 - 1. Oktober 2020 )Schirmer T. , Ließmann W. , Macauley C. , Felfer P. :Indium and antimony distribution in a sphalerite from the “burgstaetter gangzug” of the upper harz mountains pb-zn mineralization Minerals 10 2020 ), S. 1-19 ISSN: 2075-163X 10.3390/min10090791 Stückler M. , Weissitsch L. , Wurster S. , Felfer P. , Krenn H. , Pippan R. , Bachmaier A. :Magnetic dilution by severe plastic deformation AIP Advances 10 2020 ), Art.Nr.: 015210 ISSN: 2158-3226 10.1063/1.5128058 Tinoco HA. , Hutař P. , Merle B. , Göken M. , Kruml T. :Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge test 18th International Conference on Fracture and Damage Mechanics, FDM 2019 (Rhodes 16. September 2019 - 18. September 2019 )In: Key Engineering Materials 2020 10.4028/www.scientific.net/KEM.827.196 Travitzky N. , Boccaccini AR. , Göken M. :The Department of Materials Science and Engineering at the Friedrich-Alexander-University of Erlangen-Nürnberg Advanced Engineering Materials 22 2020 ), Art.Nr.: 2000921 ISSN: 1438-1656 10.1002/adem.202000921 Volz N. , Zenk C. , Halvaci T. , Matuszewska K. , Neumeier S. , Göken M. :Castability and Recrystallization Behavior of γ′-Strengthened Co-Base Superalloys 10.1007/978-3-030-51834-9_88 Wang YF. , Huang CX. , Fang XT. , Höppel HW. , Göken M. , Zhu YT. :Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient Scripta Materialia 174 2020 ), S. 19-23 ISSN: 1359-6462 10.1016/j.scriptamat.2019.08.022 Xie Z. , Shin J. , Renner J. , Prakash A. , Gianola DS. , Bitzek E. :Origins of strengthening and failure in twinned Au nanowires: Insights from in−situ experiments and atomistic simulations Acta Materialia 187 2020 ), S. 166-175 ISSN: 1359-6454 10.1016/j.actamat.2020.01.038 Xue F. , Zenk C. , Freund L. , Neumeier S. , Göken M. :Understanding raft formation and precipitate shearing during double minimum creep in a γ′-strengthened single crystalline Co-base superalloy Philosophical Magazine 2020 )ISSN: 1478-6443 10.1080/14786435.2020.1836415 Zenk C. , Volz N. , Bezold A. , Huber LK. , Eggeler Y. , Spiecker E. , Göken M. , Neumeier S. :The Effect of Alloying on the Thermophysical and Mechanical Properties of Co–Ti–Cr-Based Superalloys 10.1007/978-3-030-51834-9_89 Zenk C. , Volz N. , Zenk C. , Felfer P. , Neumeier S. :Impact of the Co/Ni-Ratio on Microstructure, Thermophysical Properties and Creep Performance of Multi-Component γ′-Strengthened Superalloys Crystals 10 2020 ), S. 1058 ISSN: 2073-4352 10.3390/cryst10111058 Zhao M. , Issa I. , Pfeifenberger M. , Wurmshuber M. , Kiener D. :Tailoring ultra-strong nanocrystalline tungsten nanofoams by reverse phase dissolution Acta Materialia 182 2020 ), S. 215-225 ISSN: 1359-6454 10.1016/j.actamat.2019.10.030 Zomorodpoosh S. , Volz N. , Neumeier S. , Roslyakova I. :Application of change-point analysis to the selection of representative data in creep experiments Journal of Physics Communications 4 2020 ), S. 1-11 ISSN: 2399-6528 10.1088/2399-6528/aba7ff
2019
Ast J. , Ghidelli M. , Durst K. , Göken M. , Sebastiani M. , Korsunsky AM. :A review of experimental approaches to fracture toughness evaluation at the micro-scale Materials and Design 173 2019 ), Art.Nr.: 107762 ISSN: 0261-3069 10.1016/j.matdes.2019.107762 Atila A. , Ghardi EM. , Hasnaoui A. , Ouaskit S. :Alumina effect on the structure and properties of calcium aluminosilicate in the percalcic region: A molecular dynamics investigation Journal of Non-Crystalline Solids 525 2019 ), Art.Nr.: 119470 ISSN: 0022-3093 10.1016/j.jnoncrysol.2019.119470 Atila A. , Ghardi EM. , Ouaskit S. , Hasnaoui A. :Atomistic insights into the impact of charge balancing cations on the structure and properties of aluminosilicate glasses Physical Review B 100 2019 )ISSN: 0163-1829 10.1103/PhysRevB.100.144109 Bachmaier A. , Hohenwarter A. , Höppel HW. , Ivanisenko J. :Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures Advanced Engineering Materials 21 2019 ), Art.Nr.: ARTN 1801073 ISSN: 1438-1656 10.1002/adem.201801073 Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklencka V. :Strain Rate Contribution due to Dynamic Recovery of Ultrafine-Grained Cu-Zr as Evidenced by Load Reductions during Quasi-Stationary Deformation at 0.5 T-m Metals 9 2019 )ISSN: 2075-4701 10.3390/met9111150 Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklenicka V. :Quasi-Stationary Strength of ECAP-Processed Cu-Zr at 0.5 T-m Metals 9 2019 )ISSN: 2075-4701 10.3390/met9111149 Bresler J. , Neumeier S. , Ziener M. , Pyczak F. , Göken M. :The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar gamma/alpha(2) titanium aluminides Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 2019 ), S. 46-53 ISSN: 0921-5093 10.1016/j.msea.2018.11.152 Bresler J. , Neumeier S. , Ziener M. , Pyczak F. , Göken M. :The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 2019 ), S. 46-53 ISSN: 0921-5093 10.1016/j.msea.2018.11.152 Bykov M. , Chariton S. , Fei H. , Fedotenko T. , Aprilis G. , Ponomareva AV. , Tasnádi F. , Abrikosov IA. , Merle B. , Feldner P. , Vogel S. , Schnick W. , Prakapenka VB. , Greenberg E. , Hanfland M. , Pakhomova A. , Liermann HP. , Katsura T. , Dubrovinskaia N. , Dubrovinsky L. :High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re2(N2)(N)2 stable at ambient conditions Nature Communications 10 2019 ), Art.Nr.: 2994 ISSN: 2041-1723 10.1038/s41467-019-10995-3 Böhm C. , Feldner P. , Merle B. , Wolf S. :Conical nanoindentation allows azimuthally independent hardness determination in geological and biogenic minerals Materials 12 2019 ), Art.Nr.: 1630 ISSN: 1996-1944 10.3390/ma12101630 Frydrych K. , Kowalczyk-Gajewska K. , Prakash A. :On solution mapping and remeshing in crystal plasticity finite element simulations: application to equal channel angular pressing Modelling and Simulation in Materials Science and Engineering 27 2019 )ISSN: 0965-0393 10.1088/1361-651X/ab28e3 Giese S. , Kern F. , Macauley C. , Neumeier S. , Göken M. :Fracture resistance of yttria stabilized zirconia manufactured from stabilizer-coated nanopowder by micro cantilever bending tests Journal of the European Ceramic Society 2019 )ISSN: 0955-2219 10.1016/j.jeurceramsoc.2019.05.006 Giese S. , Neumeier S. , Amberger-Matschkal D. , Bergholz J. , Vaßen R. , Göken M. :Microtensile creep testing of freestanding MCrAlY bond coats Journal of Materials Research 2019 )ISSN: 0884-2914 10.1557/jmr.2019.169 Giese S. , Neumeier S. , Bergholz J. , Naumenko D. , Quadakkers WJ. , Vassen R. , Göken M. :Influence of Different Annealing Atmospheres on the Mechanical Properties of Freestanding MCrAlY Bond Coats Investigated by Micro-Tensile Creep Tests Metals 9 2019 )ISSN: 2075-4701 10.3390/met9060692 Glöckel F. , Uggowitzer PJ. , Felfer P. , Pogatscher S. , Höppel HW. :Influence of Zn and Sn on the precipitation behavior of new Al-Mg-Si alloys Materials 12 2019 ), Art.Nr.: 2547 ISSN: 1996-1944 10.3390/ma12162547 Gonzalez-Gutierrez J. , Thompson Y. , Cano S. , Felfer P. , Kukla C. , Holzer C. :Steel parts produced by material extrusion additive manufacturing, solvent debiding and sintering Materials Science and Technology 2019, MS and T 2019 (Portland, OR 29. September 2019 - 3. Oktober 2019 )In: MS and T 2019 - Materials Science and Technology 2019 2019 10.7449/2019/MST_2019_264_266 Guillonneau G. , Wheeler JM. , Wehrs J. , Philippe L. , Baral P. , Höppel HW. , Göken M. , Michler J. :Determination of the true projected contact area by in situ indentation testing Journal of Materials Research 34 2019 ), S. 2859-2868 ISSN: 0884-2914 10.1557/jmr.2019.236 Hou X. , Krauß S. , Merle B. :Additional grain boundary strengthening in length-scale architectured copper with ultrafine and coarse domains Scripta Materialia 165 2019 ), S. 55-59 ISSN: 1359-6462 10.1016/j.scriptamat.2019.02.019 Karewar S. , Sietsma J. , Santofimia MJ. :Effect of C on the Martensitic Transformation in Fe-C Alloys in the Presence of Pre-Existing Defects: A Molecular Dynamics Study Crystals 9 2019 )ISSN: 2073-4352 10.3390/cryst9020099 Katnagallu S. , Stephenson LT. , Mouton I. , Freysoldt C. , Subramanyam APA. , Jenke J. , Ladines AN. , Neumeier S. , Hammerschmidt T. , Drautz R. , Neugebauer J. , Vurpillot F. , Raabe D. , Gault B. :Imaging individual solute atoms at crystalline imperfections in metals New Journal of Physics 21 2019 )ISSN: 1367-2630 10.1088/1367-2630/ab5cc4 Lamm S. , Matschkal D. , Göken M. , Felfer P. :Impact of Mn on the precipitate structure and creep resistance of Ca containing magnesium alloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 761 2019 ), Art.Nr.: 137964 ISSN: 0921-5093 10.1016/j.msea.2019.05.094 Lenz M. , Eggeler Y. , Müller J. , Zenk C. , Volz N. , Wollgramm P. , Eggeler G. , Neumeier S. , Göken M. , Spiecker E. :Tension/Compression asymmetry of a creep deformed single crystal Co-base superalloy Acta Materialia 166 2019 ), S. 597-610 ISSN: 1359-6454 10.1016/j.actamat.2018.12.053 Löffl C. , Saage H. , Göken M. :In situ X-ray tomography investigation of the crack formation in an intermetallic beta-stabilized TiAl-alloy during a stepwise tensile loading International Journal of Fatigue 124 2019 ), S. 138-148 ISSN: 0142-1123 10.1016/j.ijfatigue.2019.02.035 Martić N. , Reller C. , Macauley C. , Löffler M. , Schmid B. , Reinisch D. , Volkova E. , Maltenberger A. , Rucki A. , Mayrhofer K. , Schmid G. :Paramelaconite-Enriched Copper-Based Material as an Efficient and Robust Catalyst for Electrochemical Carbon Dioxide Reduction Advanced Energy Materials 2019 ), Art.Nr.: 1901228 ISSN: 1614-6832 10.1002/aenm.201901228 Matschkal D. , Kolb M. , Neumeier S. , Gao S. , Hartmaier A. , Durst K. , Göken M. :New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures Materials & Design 183 2019 ), Art.Nr.: 108090 ISSN: 0264-1275 10.1016/j.matdes.2019.108090 McCarroll IE. , Haley D. , Thomas S. , Meier M. , Bagot PA. , Moody MP. , Birbilis N. , Cairney JM. :The effect of hydrogen on the early stages of oxidation of a magnesium alloy Corrosion Science 2019 ), Art.Nr.: 108391 ISSN: 0010-938X 10.1016/j.corsci.2019.108391 Merle B. :Creep behavior of gold thin films investigated by bulge testing at room and elevated temperature Journal of Materials Research 34 2019 ), S. 69-77 ISSN: 0884-2914 10.1557/jmr.2018.287 Merle B. , Higgins WH. , Pharr GM. :Critical issues in conducting constant strain rate nanoindentation tests at higher strain rates Journal of Materials Research 2019 )ISSN: 0884-2914 10.1557/jmr.2019.292 Mueller T. , Kapp MW. , Bachmaier A. , Felfer P. , Pippan R. :Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion Acta Materialia 166 2019 ), S. 168-177 ISSN: 1359-6454 10.1016/j.actamat.2018.12.028 Preiß E. , Lyu H. , Liebig JP. , Richter G. , Gannott F. , Gruber PA. , Göken M. , Bitzek E. , Merle B. :Microstructural dependence of the fracture toughness of metallic thin films: A bulge test and atomistic simulation study on single-crystalline and polycrystalline silver films Journal of Materials Research 34 2019 ), S. 3483-3494 ISSN: 0884-2914 10.1557/jmr.2019.262 https://www.cambridge.org/core/journals/journal-of-materials-research/article/microstructural-dependence-of-the-fracture-toughness-of-metallic-thin-films-a-bulge-test-and-atomistic-simulation-study-on-singlecrystalline-and-polycrystalline-silver-films/73FEF9FD56EFF314E1366003EFFE8C5B# Schreiner J. , Götz-Neunhoeffer F. , Neubauer J. , Bergold S. , Webler R. , Volkmann S. , Jansen D. :Advanced Rietveld refinement and SEM analysis of tobermorite in
chemically diverse autoclaved aerated concrete Powder Diffraction 2019 )ISSN: 0885-7156 10.1017/S0885715619000149 Schunk C. , Nitschky M. , Höppel HW. , Göken M. :Superior Mechanical Properties of Aluminum-Titanium Laminates in Terms of Local Hardness and Strength Advanced Engineering Materials 21 2019 ), Art.Nr.: ARTN 1800546 ISSN: 1438-1656 10.1002/adem.201800546 Thompson Y. , Gonzalez-Gutierrez J. , Kukla C. , Felfer P. :Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel Additive Manufacturing 30 2019 ), Art.Nr.: 100861 ISSN: 2214-7810 10.1016/j.addma.2019.100861 Vaid A. , Guenole J. , Prakash A. , Korte-Kerzel S. , Bitzek E. :Atomistic simulations of basal dislocations in Mg interacting with Mg17Al12 precipitates Materialia 7 2019 ), Art.Nr.: 100355 ISSN: 2589-1529 10.1016/j.mtla.2019.100355 https://www.sciencedirect.com/science/article/pii/S2589152919301516?via=ihub Weiser M. , Chater RJ. , Shollock BA. , Virtanen S. :Transport mechanisms during the high-temperature oxidation of ternary γ/γ′ Co-base model alloys npj Materials Degradation 3 2019 ), S. 1-11 ISSN: 2397-2106 10.1038/s41529-019-0096-z Weiser M. , Galetz MC. , Zschau HE. , Zenk C. , Neumeier S. , Göken M. , Virtanen S. :Influence of Co to Ni ratio in γ′-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C Corrosion Science 2019 )ISSN: 0010-938X 10.1016/j.corsci.2019.05.007 Weiß L. , Wensing M. , Engl N. , Siegel F. , Tilinski M. , Zülow D. , Passily L. :Local Heat Transfer and Interdependency of Piston Material, Spray and Combustion in High Power Diesel Engines Workshop ENCOM 2019, Waischenfeld, 16./17.10.2019 (Fraunhofer Forschungscampus Waischenfeld 16. Juli 2019 - 17. Juli 2019 )Wurmshuber M. , Doppermann S. , Wurster S. , Kiener D. :Ultrafine-grained Tungsten by High-Pressure Torsion - Bulk precursor versus powder processing route 40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D 10.1088/1757-899X/580/1/012051 Zenk C. , Gibson JS. , Maier-Kiener V. , Neumeier S. , Göken M. , Korte-Kerzel S. :Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements Acta Materialia 181 2019 ), S. 385-398 ISSN: 1359-6454 10.1016/j.actamat.2019.09.008 Zhou H. , Huang C. , Sha X. , Xiao L. , Ma X. , Höppel HW. , Göken M. , Wu X. , Ameyama K. , Han X. , Zhu Y. :In-situ observation of dislocation dynamics near heterostructured interfaces Materials Research Letters 7 2019 ), S. 376-382 ISSN: 2166-3831 10.1080/21663831.2019.1616330
2018
Bachmann J. , Göken M. , Höppel HW. :Fatigue of low alloyed carbon steels in the HCF/VHCF-regimes In: Hans-Jürgen Christ (Hrsg.): Fatigue of Materials at Very High Numbers of Loading Cycles Wiesbaden Springer Spektrum 2018 , S. 1-23 ISBN: 9783658245306 10.1007/978-3-658-24531-3_1 Barr CM. , Felfer P. , Cole JI. , Taheri ML. :Observation of oscillatory radiation induced segregation profiles at grain boundaries in neutron irradiated 316 stainless steel using atom probe tomography Journal of Nuclear Materials 504 2018 ), S. 181-190 ISSN: 0022-3115 10.1016/j.jnucmat.2018.01.053 Biggemann J. , Diepold B. , Pezoldt M. , Stumpf M. , Greil P. , Fey T. :Automated 3D assembly of periodic alumina-epoxy composite structures Journal of the American Ceramic Society 2018 )ISSN: 0002-7820 10.1111/jace.15586 Blum W. :Discussion: Activation volumes of plastic deformation of crystals Scripta Materialia 146 2018 ), S. 27-30 ISSN: 1359-6462 10.1016/j.scriptamat.2017.10.029 Carton-Cordero M. , Campos M. , Freund L. , Kolb M. , Neumeier S. , Göken M. , Torralba JM. :Microstructure and compression strength of Co-based superalloys hardened by γ′ and carbide precipitation Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 734 2018 ), S. 437-444 ISSN: 0921-5093 10.1016/j.msea.2018.08.007 Cormier J. , Rae C. , Neumeier S. , Hardy M. , Reed R. :Superalloys and Their Applications Foreword Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A 2018 ), S. 3763-3763 ISSN: 1073-5623 10.1007/s11661-018-4803-0 Feldner P. , Merle B. , Göken M. :Superplastic deformation behavior of Zn-22% Al alloy investigated by nanoindentation at elevated temperatures Materials & Design 153 2018 ), S. 71-79 ISSN: 0264-1275 10.1016/j.matdes.2018.05.008 Felfer P. , Cairney J. :Advanced concentration analysis of atom probe tomography data: Local proximity histograms and pseudo-2D concentration maps Ultramicroscopy 189 2018 ), S. 61-64 ISSN: 0304-3991 10.1016/j.ultramic.2018.03.011 Felfer P. , Sandfeld S. :Digitalisation in Materials Science – Combining Experiments and Simulation Across Length Scales Praktische Metallographie 55 2018 ), S. 492- ISSN: 0032-678X 10.3139/147.018081 Felfer P. , Stephenson LT. , Li T. :Atom Probe Tomography Praktische Metallographie 55 2018 ), S. 515-526 ISSN: 0032-678X 10.3139/147.110543 Freund L. , Stark A. , Kirchmayer A. , Schell N. , Pyczak F. , Göken M. , Neumeier S. :The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A 2018 ), S. 4070-4078 ISSN: 1073-5623 10.1007/s11661-018-4757-2 Freund L. , Stark A. , Pyczak F. , Schell N. , Göken M. , Neumeier S. :The grain boundary pinning effect of the mu phase in an advanced polycrystalline γ/γ′ Co-base superalloy Journal of Alloys and Compounds 753 2018 ), S. 333-342 ISSN: 0925-8388 10.1016/j.jallcom.2018.04.204 Freund L. , Stark A. , Pyczak F. , Schell N. , Göken M. , Neumeier S. :The grain boundary pinning effect of the μ phase in an advanced polycrystalline γ/γ′ Co-base superalloy Journal of Alloys and Compounds 753 2018 ), S. 333-342 ISSN: 0925-8388 10.1016/j.jallcom.2018.04.204 Gulden F. , Gramstat S. , Stich A. , Höppel HW. , Tetzlaff U. :Properties and Limitation of an Oxide Coated Aluminum Brake Rotor SAE Technical Papers 2018 ), Art.Nr.: 2018-01-1877 ISSN: 0148-7191 10.4271/2018-01-1877 Houlle F. , Walsh F. , Prakash A. , Bitzek E. :Atomistic Simulations of Compression Tests on gamma-Precipitate Containing Ni3Al Nanocubes Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A 2018 ), S. 4158-4166 ISSN: 1073-5623 10.1007/s11661-018-4706-0 Huang CX. , Wang YF. , Ma XL. , Yin S. , Höppel HW. , Göken M. , Wu XL. , Gao HJ. , Zhu YT. :Interface affected zone for optimal strength and ductility in heterogeneous laminate Materials Today 21 2018 ), S. 713-719 ISSN: 1369-7021 10.1016/j.mattod.2018.03.006 Khansur NH. , Eckstein U. , Benker L. , Deisinger U. , Merle B. , Webber KG. :Room temperature deposition of functional ceramic films on low-cost metal substrate Ceramics International 44 2018 ), S. 16295-16301 ISSN: 0272-8842 10.1016/j.ceramint.2018.06.027 Kimmel AC. , Malkowski TF. , Griffiths S. , Hertweck B. , Steigerwald T. , Freund L. , Neumeier S. , Göken M. , Speck JS. , Schlücker E. :High-temperature corrosion of Inconel (R) Alloy 718, Haynes (R) 282 (R) Alloy and CoWAlloy1&2 in supercritical ammonia/ammonium chloride solutio Journal of Crystal Growth 498 2018 ), S. 289-300 ISSN: 0022-0248 10.1016/j.jcrysgro.2018.06.018 Kolb M. , Freund L. , Fischer F. , Povstugar I. , Makineni SK. , Gault B. , Raabe D. , Müller J. , Spiecker E. , Neumeier S. , Göken M. :On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys Acta Materialia 2018 ), S. 247-254 ISSN: 1359-6454 10.1016/j.actamat.2017.12.020 Kümmel F. , Diepold B. , Prakash A. , Höppel HW. , Göken M. :Enhanced monotonic and cyclic mechanical properties of ultrafine-grained laminated metal composites with strong and stiff interlayers International Journal of Fatigue 116 2018 ), S. 379-387 ISSN: 0142-1123 10.1016/j.ijfatigue.2018.06.043 Kümmel F. , Diepold B. , Sauer KF. , Schunk C. , Prakash A. , Höppel HW. , Göken M. :High Lightweight Potential of Ultrafine-Grained Aluminum/Steel Laminated Metal Composites Produced by Accumulative Roll Bonding Advanced Engineering Materials 2018 )ISSN: 1438-1656 10.1002/adem.201800286 Li T. , Kasian O. , Cherevko S. , Zhang S. , Geiger S. , Scheu C. , Felfer P. , Raabe D. , Gault B. , Mayrhofer K. :Atomic-scale insights into surface species of electrocatalysts in three dimensions Nature Catalysis 1 2018 ), S. 300-305 ISSN: 2520-1158 10.1038/s41929-018-0043-3 Liebig JP. , Krauß S. , Göken M. , Merle B. :Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression Acta Materialia 154 2018 ), S. 261-272 ISSN: 1359-6454 10.1016/j.actamat.2018.05.037 Macauley C. , Fernandez AN. , Van Sluytman JS. , Levi CG. :Phase equilibria in the ZrO2-YO1.5-TaO2.5 system at 1250 degrees C Journal of the European Ceramic Society 38 2018 ), S. 4523-4532 ISSN: 0955-2219 10.1016/j.jeurceramsoc.2018.06.010 Makineni SK. , Kumar A. , Lenz M. , Kontis P. , Meiners T. , Zenk C. , Zaefferer S. , Eggeler G. , Neumeier S. , Spiecker E. , Raabe D. , Gault B. :On the diffusive phase transformation mechanism assisted by extended dislocations during creep of a single crystal CoNi-based superalloy Acta Materialia 2018 ), S. 362-371 ISSN: 1359-6454 10.1016/j.actamat.2018.05.074 Makineni SK. , Lenz M. , Kontis P. , Li Z. , Kumar A. , Felfer P. , Neumeier S. , Herbig M. , Spiecker E. , Raabe D. , Gault B. :Correlative Microscopy-Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys JOM Journal of the Minerals, Metals and Materials Society 70 2018 ), S. 1736-1743 ISSN: 1047-4838 10.1007/s11837-018-2802-7 Makineni SK. , Lenz M. , Kontis P. , Li Z. , Kumar A. , Felfer P. , Neumeier S. , Herbig M. , Spiecker E. , Raabe D. , Gault B. :Correlative Microscopy—Novel Methods and Their Applications to Explore 3D Chemistry and Structure of Nanoscale Lattice Defects: A Case Study in Superalloys JOM Journal of the Minerals, Metals and Materials Society 2018 ), S. 1-8 ISSN: 1047-4838 10.1007/s11837-018-2802-7 Makineni SK. , Lenz M. , Neumeier S. , Spiecker E. , Raabe D. , Gault B. :Elemental segregation to antiphase boundaries in a crept CoNi-based single crystal superalloy Scripta Materialia 2018 ), S. 62-66 ISSN: 1359-6462 10.1016/j.scriptamat.2018.07.042 Mccarroll I. , Scherrer B. , Felfer P. , Moody MP. , Cairney JM. :Interpreting Atom Probe Data from Oxide-Metal Interfaces Microscopy and Microanalysis 24 2018 ), S. 342-349 ISSN: 1431-9276 10.1017/S1431927618012370 Medvedev AE. , Lapovok R. , Koch E. , Höppel HW. , Göken M. :Optimisation of interface formation by shear inclination: Example of aluminium-cooper hybrid produced by ECAP with back-pressure Materials & Design 146 2018 ), S. 142-151 ISSN: 0264-1275 10.1016/j.matdes.2018.03.021 Medvedev AE. , Lapovok R. , Koch E. , Höppel HW. , Göken M. :Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure Materials & Design 146 2018 ), S. 142-151 ISSN: 0264-1275 10.1016/j.matdes.2018.03.021 Merle B. , Höppel HW. :Microscale High-Cycle Fatigue Testing by Dynamic Micropillar Compression Using Continuous Stiffness Measurement Experimental Mechanics 58 2018 ), S. 465-474 ISSN: 0014-4851 10.1007/s11340-017-0362-3 Merle B. , Kraus X. , Tallawi M. , Scharfe B. , El Fray M. , Aifantis KE. , Boccaccini AR. , Göken M. :Dynamic mechanical characterization of poly(glycerol sebacate)/poly (butylene succinate-butylene dilinoleate) blends for cardiac tissue engineering by flat punch nanoindentation Materials Letters 221 2018 ), S. 115-118 ISSN: 0167-577X 10.1016/j.matlet.2018.03.051 Möller J. , Bitzek E. :Atomic-scale modeling of elementary processes during the fatigue of metallic materials: from crack initiation to crack-microstructure interactions In: Christ, Hans-Jürgen (Hrsg.): Fatigue of Materials at Very High Numbers of Loading Cycles - Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment Wiesbaden Springer Spektrum 2018 ISBN: 978-3-658-24531-3 10.1007/978-3-658-24531-3_2 https://www.springer.com/de/book/9783658245306 Möller J. , Bitzek E. , Janisch R. , ul Hassan H. , Hartmaier A. :Fracture ab initio: A force-based scaling law for atomistically informed continuum models Journal of Materials Research 33 2018 ), S. 3750-3761 ISSN: 0884-2914 10.1557/jmr.2018.384 https://www.cambridge.org/core/journals/journal-of-materials-research/article/fracture-ab-initio-a-forcebased-scaling-law-for-atomistically-informed-continuum-models/077AFC469E3C82F3D1A537EA83AEF5F6# Möller J. , Mrovec M. , Bleskov I. , Neugebauer J. , Hammerschmidt T. , Drautz R. , Elsaesser C. , Hickel T. , Bitzek E. :{110} planar faults in strained bcc metals: Origins and implications of a commonly observed artifact of classical potentials Physical Review Materials 2 2018 )ISSN: 2475-9953 10.1103/PhysRevMaterials.2.093606 Preiß E. , Gannott F. , Göken M. , Merle B. :Scaling of the fracture toughness of freestanding metallic thin films with the yield strength Materials Research Letters 6 2018 ), S. 607-612 ISSN: 2166-3831 10.1080/21663831.2018.1520749 Schunk C. , Nitschky M. , Höppel HW. , Göken M. :Superior Mechanical Properties of Aluminum–Titanium Laminates in Terms of Local Hardness and Strength Advanced Engineering Materials 2018 )ISSN: 1438-1656 10.1002/adem.201800546 Volz N. , Zenk C. , Cherukuri R. , Kalfhaus T. , Weiser M. , Makineni SK. , Betzing C. , Lenz M. , Gault B. , Fries SG. , Schreuer J. , Vassen R. , Virtanen S. , Raabe D. , Spiecker E. , Neumeier S. , Göken M. :Thermophysical and Mechanical Properties of Advanced Single Crystalline Co-base Superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 2018 ), S. 1-11 ISSN: 1073-5623 10.1007/s11661-018-4705-1 Wurmshuber M. , Frazer D. , Bachmaier A. , Wang Y. , Hosemann P. , Kiener D. :Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag Materials & Design 160 2018 ), S. 1148-1157 ISSN: 0264-1275 10.1016/j.matdes.2018.11.007 Xue F. , Zenk C. , Freund L. , Hoelzel M. , Neumeier S. , Göken M. :Double minimum creep in the rafting regime of a single-crystal Co-base superalloy Scripta Materialia 142 2018 ), S. 129-132 ISSN: 1359-6462 10.1016/j.scriptamat.2017.08.039
2017
Ast J. , Göken M. , Durst K. :Size-dependent fracture toughness of tungsten Acta Materialia 138 2017 ), S. 198-211 ISSN: 1359-6454 10.1016/j.actamat.2017.07.030 Baranova P. , Bitzek E. :Influence of Atomic-scale Heterogeneties on Fracture Behavior of B2 NiAl In: 14th International Conference on Fracture (ICF 14) 2017 Bitzek E. , Baranova P. , Möller J. :3D Aspects of Fracture and Effects due to Crack Front Curvature In: 14th International Conference on Fracture (ICF 14) 2017 Kral P, Dvorak J, Kvapilova M, Blum W, Sklenicka V:The influence of long-term annealing at room temperature on creep behaviour of ECAP-processed copper Materials Letters 188 2017 ), S. 235-238 ISSN: 0167-577X 10.1016/j.matlet.2016.11.002
Eder K. , Felfer P. , Gault B. , Ceguerra AV. , La Fontaine A. , Masters AF. , Maschmeyer T. , Cairney JM. :A New Approach to Understand the Adsorption of Thiophene on Different Surfaces: An Atom Probe Investigation of Self-Assembled Monolayers Langmuir 33 2017 ), S. 9573-9581 ISSN: 0743-7463 10.1021/acs.langmuir.7b01820 Feldner P. , Merle B. , Göken M. :Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation Journal of Materials Research 32 2017 ), S. 1466-1473 ISSN: 0884-2914 10.1557/jmr.2017.69 Fischer C. , Seefried A. , Merle B. , Göken M. , Drummer D. :Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time Polymer Engineering and Science 57 2017 ), S. 121-128 ISSN: 0032-3888 10.1002/pen.24394 Freund L. , Giese S. , Schwimmer D. , Höppel HW. , Neumeier S. , Göken M. :High temperature properties and fatigue strength of novel wrought gamma/gamma' Co-base superalloys Journal of Materials Research 32 2017 ), S. 4475-4482 ISSN: 0884-2914 10.1557/jmr.2017.315 Freund L. , Messe OMDM. , Barnard JS. , Göken M. , Neumeier S. , Rae CMF. :Segregation assisted microtwinning during creep of a polycrystalline L1(2)-hardened Co-base superalloy Acta Materialia 123 2017 ), S. 295-304 ISSN: 1359-6454 10.1016/j.actamat.2016.10.048 Ghanem M. , Göken M. , Merle B. :Plane-strain bulge testing of thin films under compressive residual stresses Surface & Coatings Technology 327 2017 ), S. 167-173 ISSN: 0257-8972 10.1016/j.surfcoat.2017.08.004 Guenole J. , Prakash A. , Bitzek E. :Atomistic simulations of focused ion beam machining of strained silicon Applied Surface Science 416 2017 ), S. 86-95 ISSN: 0169-4332 10.1016/j.apsusc.2017.04.027 Gulden F. , Höppel HW. , Göken M. , Stich A. , Gramstat S. :Fundamental Investigations of Aluminium Matrix Composite Brake Rotors for the Use in Passenger Cars In: EuroBreak 2017 (EB2017-MDS-026) 2017 Göken M. , Eggeler G. , Zhu Y. , Lu L. :MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ADVANCED METALLIC ALLOYS IN HONOR OF PROF. HAEL MUGHRABI - PART B - HIGH TEMPERATURE AND NANOMATERIALS Introduction Journal of Materials Research 32 2017 ), S. 4463-4465 ISSN: 0884-2914 10.1557/jmr.2017.469 Höppel HW. :Ultrafine-grained Metals MDPI Basel 2017 ISBN: 978-3-03842-524-3 Höppel HW. , Goik P. , Krechel C. , Göken M. :Ex and in situ investigations on the role of persistent slip bands and grain boundaries in fatigue crack initiation Journal of Materials Research 32 2017 ), S. 4276-4286 ISSN: 0884-2914 10.1557/jmr.2017.313 Iqbal F. , Pyczak F. , Neumeier S. , Göken M. :Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 689 2017 ), S. 11-16 ISSN: 0921-5093 10.1016/j.msea.2017.02.017 Kolb M. , Zenk C. , Kirzinger A. , Povstugar I. , Raabe D. , Neumeier S. , Göken M. :Influence of rhenium on γ′-strengthened cobalt-base superalloys Journal of Materials Research 32 2017 ), S. 2551-2559 ISSN: 0884-2914 10.1557/jmr.2017.242 Kümmel F. , Höppel HW. , Göken M. :Layer architecture and fatigue life of ultrafine-grained laminated metal composites consisting of different aluminum alloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 702 2017 ), S. 406-413 ISSN: 0921-5093 10.1016/j.msea.2017.06.105 Kümmel F. , Tegtmeier TS. , Höppel HW. , Göken M. :Optimized layer architecture for an extended fatigue life of ultrafine-grained AA1050/AA5005 laminated metal composites IOP Conference Series: Materials Science and Engineering 194 2017 ), S. 012036 ISSN: 1757-8981 10.1088/1757-899X/194/1/012036 Leitner (Babinsky) K. , Felfer P. , Holec D. , Cairney J. , Knabl W. , Lorich A. , Clemens H. , Primig S. :On grain boundary segregation in molybdenum materials Materials & Design 135 2017 ), S. 204-212 ISSN: 0264-1275 10.1016/j.matdes.2017.09.019 Merle B. , Maier-Kiener V. , Pharr GM. :Influence of modulus-to-hardness ratio and harmonic parameters on continuous stiffness measurement during nanoindentation Acta Materialia 134 2017 ), S. 167-176 ISSN: 1359-6454 10.1016/j.actamat.2017.05.036 Mikschl F. , Merle B. , Baum M. , Heberle J. , Göken M. , Schmidt M. :Micromechanical characterization of laser consolidated nanoparticle ITO layers Thin Solid Films 642 2017 ), S. 214-218 ISSN: 0040-6090 10.1016/j.tsf.2017.09.046 Mousavi M. , Guenole J. , Baranova P. , Bitzek E. , Korsunsky AM. :Atomistic Simulation of Cracks versus Generalized Continua In: 14th International Conference on Fracture (ICF 14) 2017 Prakash A. , Bitzek E. :Idealized vs. Realistic Microstructures: An Atomistic Simulation Case Study on γ/γ′ Microstructures Materials 10 2017 )ISSN: 1996-1944 10.3390/ma10010088 Prakash A. , Weygand D. , Bitzek E. :Influence of grain boundary structure and topology on the plastic deformation of nanocrystalline aluminum as studied by atomistic simulations International Journal of Plasticity 97 2017 ), S. 107-125 ISSN: 0749-6419 10.1016/j.ijplas.2017.05.11 Preiß E. , Merle B. , Göken M. :Understanding the Extremely Low Fracture Toughness of Freestanding Gold Thin Films by In-situ Bulge Testing in an AFM Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 691 2017 ), S. 218-225 ISSN: 0921-5093 10.1016/j.msea.2017.03.037 http://www.sciencedirect.com/science/article/pii/S0921509317303271 Rehman HU. , Burst K. , Neumeier S. , Sato A. , Reed R. , Göken M. :On the temperature dependent strengthening of nickel by transition metal solutes Acta Materialia 137 2017 ), S. 54-63 ISSN: 1359-6454 10.1016/j.actamat.2017.05.038 Schwimmer D. , Stich A. , Höppel HW. :Possibilities for Improving the Heat Resistance of Cylinder Head Alloys based on AlSi7MgCu0.5 and AISi10MgCu0.5 Shrestha S. , Fischer R. , Matt G. , Feldner P. , Michel T. , Osvet A. , Levchuk I. , Merle B. , Golkar S. , Chen H. , Tedde SF. , Schmidt O. , Hock R. , Ruehrig M. , Göken M. , Heiß W. , Anton G. , Brabec C. :High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers Nature Photonics 11 2017 ), S. 436-+ ISSN: 1749-4885 10.1038/NPHOTON.2017.94 Vierneusel B. , Benker L. , Tremmel S. , Göken M. , Merle B. :Isolating the effect of residual stresses on coating wear by a mechanical stress relaxation technique Thin Solid Films 638 2017 ), S. 159 - 166 ISSN: 0040-6090 10.1016/j.tsf.2017.06.016 https://www.archiv.mfk.tf.fau.de?file=pubmfk_5a6af86239b18 Wang L. , Zenk C. , Stark A. , Felfer P. , Gabrisch H. , Göken M. , Lorenz U. , Pyczak F. :Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys Acta Materialia 137 2017 ), S. 36-44 ISSN: 1359-6454 10.1016/j.actamat.2017.07.018 Xiao Y. , Wehrs J. , Ma H. , Al-Samman T. , Korte-Kerzel S. , Göken M. , Michler J. , Spolenak R. , Wheeler JM. :Investigation of the deformation behavior of aluminum micropillars produced by focused ion beam machining using Ga and Xe ions Scripta Materialia 127 2017 ), S. 191-194 ISSN: 1359-6462 10.1016/j.scriptamat.2016.08.028 Zenk C. , Povstugar I. , Li R. , Rinaldi F. , Neumeier S. , Raabe D. , Göken M. :A novel type of Co-Ti-Cr-base γ/γ′ superalloys with low mass density Acta Materialia 135 2017 ), S. 244-251 ISSN: 1359-6454 10.1016/j.actamat.2017.06.024 Zietara M. , Neumeier S. , Göken M. , Czyrska-Filemonowicz A. :Characterization of γ and γ′ Phases in 2nd and 4th Generation Single Crystal Nickel-Base Superalloys Metals and Materials International 23 2017 ), S. 126-131 ISSN: 1598-9623 10.1007/s12540-017-6109-y
2016
Altieri-Weimar P. , Yuan W. , Annibale ES. , Schoemaker S. , Amberger D. , Göken M. , Höppel HW. :Reliability model of LED package regarding the fatigue behavior of gold wires Antolovich SD. , Mughrabi H. :In Memoriam Claude Bathias 1938–2015 International Journal of Fatigue 93 2016 ), S. 215-215 ISSN: 0142-1123 10.1016/j.ijfatigue.2016.03.007 Ast J. , Merle B. , Durst K. , Göken M. :Fracture toughness evaluation of NiAl single crystals by microcantilevers-a new continuous J-integral method Journal of Materials Research 31 2016 ), S. 3786-3794 ISSN: 0884-2914 10.1557/jmr.2016.393 https://opus4.kobv.de/opus4-fau/files/8989/Ast_fracture_toughness.pdf Bach J. , Möller J. , Göken M. , Bitzek E. , Höppel HW. :On the transition from plastic deformation to crack initiation in the high- and very high-cycle fatigue regimes in plain carbon steels International Journal of Fatigue 2016 )ISSN: 0142-1123 10.1016/j.ijfatigue.2016.04.003 http://www.sciencedirect.com/science/article/pii/S0142112316300512 Bestmann M. , Pennacchioni G. , Mostefaoui S. , Göken M. , de Wall H. :Instantaneous healing of micro-fractures during coseismic slip: Evidence from microstructure and Ti in quartz geochemistry within an exhumed pseudotachylyte-bearing fault in tonalite Lithos 254 2016 ), S. 84-93 ISSN: 0024-4937 10.1016/j.lithos.2016.03.011 Blum W. , Eisenlohr P. , Hu J. :Interpretation of unloading tests on nanocrystalline Cu in terms of two mechanisms of deformation Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 665 2016 ), S. 171-174 ISSN: 0921-5093 10.1016/j.msea.2016.04.013 Brenne F. , Taube A. , Pröbstle M. , Neumeier S. , Schwarze D. , Schaper M. , Niendorf T. :Microstructural design of Ni-base alloys for high-temperature applications: impact of heat treatment on microstructure and mechanical properties after selective laser melting Progress in Additive Manufacturing 1 2016 ), S. 141 - 151 ISSN: 2363-9512 10.1007/s40964-016-0013-8 Cairney J. , Eder K. , Felfer P. , Masters A. :Contributions to understanding catalysis by using atom probe tomography Cartón-Cordero M. , Campos M. , Freund L. , Kolb M. , Neumeier S. , Göken M. , Torralba JM. :Mechanical behaviour of novel sintered Co-Al-W alloys at high temperatures World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016 https://www.scopus.com/record/display.uri?eid=2-s2.0-85035325510∨igin=inward Eder K. , Felfer P. , Ferry M. , Xia K. , Cairney JM. :Grain size stability in Al-Sc alloys processed by severe plastic deformation Scripta Materialia 123 2016 ), S. 105-108 ISSN: 1359-6462 10.1016/j.scriptamat.2016.06.005 Favier V. , Blanche A. , Wang C. , Ngoc Lam Phung . , Ranc N. , Wagner D. , Bathias C. , Chrysochoos A. , Mughrabi H. :Very high cycle fatigue for single phase ductile materials: Comparison between α-iron, copper and α-brass polycrystals International Journal of Fatigue 93 2016 ), S. 326-338 ISSN: 0142-1123 10.1016/j.ijfatigue.2016.05.034 Felfer P. , Cairney J. :A computational geometry framework for the optimisation of atom probe reconstructions Ultramicroscopy 169 2016 ), S. 62-68 ISSN: 0304-3991 10.1016/j.ultramic.2016.07.008 Felfer P. , Mccarroll I. , Macauley C. , Cairney JM. :A simple approach to atom probe sample preparation by using shadow masks Ultramicroscopy 160 2016 ), S. 163-167 ISSN: 0304-3991 10.1016/j.ultramic.2015.09.005 Guenole J. , Prakash A. , Bitzek E. :Influence of intrinsic strain on irradiation induced damage: the role of threshold displacement and surface binding energies Materials and Design 111 2016 ), S. 405-413 ISSN: 0261-3069 10.1016/j.matdes.2016.08.077 Hammerschmidt T. , Koßmann J. , Zenk C. , Neumeier S. , Göken M. , Lopez-Galilea I. , Mujica Roncery L. , Huth S. , Kostka A. , Theisen W. , Drautz R. :The role of local chemical composition for TCP phase precipitation in Ni-base and Co-base superalloys 13th International Symposium on Superalloys, SUPERALLOYS 2016 10.1002/9781119075646.ch10 He MR. , Samudrala SK. , Kim G. , Felfer P. , Breen AJ. , Cairney JM. , Gianola DS. :Linking stress-driven microstructural evolution in nanocrystalline aluminium with grain boundary doping of oxygen Nature Communications 7 2016 ), Art.Nr.: 11225 ISSN: 2041-1723 10.1038/ncomms11225 Huenert D. , Pröbstle M. , Casanova A. , Schlütter R. , Krakow R. , Büscher M. , Randelzhofer P. , Evans A. , Löhnert K. , Witulski T. , Neumeier S. , Rae CMF. :ATI718PLUS® - New nickel based disc alloy and its capability 13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs 11. September 2016 - 15. September 2016 )In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (Hrsg.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016 10.1002/9781119075646.ch84 Javed H. , Merle B. , Preiß E. , Hivet R. , Benedetto A. , Göken M. :Mechanical characterization of metallic thin films by bulge and scratch testing Surface & Coatings Technology 289 2016 ), S. 69-74 ISSN: 0257-8972 10.1016/j.surfcoat.2016.01.051 Kaub TM. , Felfer P. , Cairney JM. , Thompson GB. :Influence of Ni Solute segregation on the intrinsic growth stresses in Cu(Ni) thin films Scripta Materialia 113 2016 ), S. 131-134 ISSN: 1359-6462 10.1016/j.scriptamat.2015.10.010 Kolb M. , Wheeler JM. , Mathur HN. , Neumeier S. , Korte-Kerzel S. , Pyczak F. , Michler J. , Göken M. :Local mechanical properties of the (β0+ω0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperatures Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 665 2016 ), S. 135-140 ISSN: 0921-5093 10.1016/j.msea.2016.04.026 Korsunsky A. , Guenole J. , Salvati E. , Sui T. , Mousavi M. , Prakash A. , Bitzek E. :Quantifying eigenstrain distributions induced by focused ion beam damage in silicon Materials Letters 185 2016 ), S. 47-49 ISSN: 0167-577X 10.1016/j.matlet.2016.08.111 Krottenthaler M. , Benker L. , Mughal MZ. , Sebastiani M. , Durst K. , Göken M. :Effect of elastic anisotropy on strain relief and residual stress determination in cubic systems by FIB-DIC experiments Materials & Design 112 2016 ), S. 505-511 ISSN: 0264-1275 10.1016/j.matdes.2016.09.046 Kümmel F. , Hausöl T. , Höppel HW. , Göken M. :Enhanced fatigue lives in AA1050A/AA5005 laminated metal composites produced by accumulative roll bonding Acta Materialia 120 2016 ), S. 150-158 ISSN: 1359-6454 10.1016/j.actamat.2016.08.039 Kümmel F. , Kreuz M. , Hausöl T. , Höppel HW. , Göken M. :Microstructure and Mechanical Properties of Accumulative Roll-Bonded AA1050A/AA5005 Laminated Metal Composites Metals 6 2016 )ISSN: 2075-4701 10.3390/met6030056 Liebig JP. , Göken M. , Richter G. , Mackovic M. , Przybilla T. , Spiecker E. , Pierron ON. , Merle B. :A flexible method for the preparation of thin film samples for in situ TEM characterization combining shadow-FIB milling and electron beam-assisted etching Ultramicroscopy 171 2016 ), S. 82-88 ISSN: 0304-3991 10.1016/j.ultramic.2016.09.004 Luo J. , Wang J. , Bitzek E. , Huang JY. , Zheng H. , Tong L. , Yang Q. , Li J. , Mao SX. :Size-Dependent Brittle-to-Ductile Transition in Silica Glass Nanofibers Nano Letters 16 2016 ), S. 105-113 ISSN: 1530-6984 10.1021/acs.nanolett.5b03070 Ma X. , Huang C. , Moering J. , Ruppert M. , Höppel HW. , Göken M. , Narayan J. , Zhu Y. :Mechanical properties of copper/bronze laminates: Role of interfaces Acta Materialia 116 2016 ), S. 43-52 ISSN: 1359-6454 10.1016/j.actamat.2016.06.023 Mackovic M. , Niekiel F. , Wondraczek L. , Bitzek E. , Spiecker E. :In situ mechanical quenching of nanoscale silica spheres in the transmission electron microscope Scripta Materialia 121 2016 ), S. 70-74 ISSN: 1359-6462 10.1016/j.scriptamat.2016.04.019 http://www.sciencedirect.com/science/article/pii/S1359646216301397 Merle B. , Nicholson KS. , Herbert EG. , Göken M. :An improved method for point deflection measurements on rectangular membranes Materials & Design 109 2016 ), S. 485-491 ISSN: 0264-1275 10.1016/j.matdes.2016.07.054 Morgenstern M. , Freitag N. , Vaid A. , Pratzer M. , Liebmann M. :Graphene quantum dots: wave function mapping by scanning tunneling spectroscopy and transport spectroscopy of quantum dots prepared by local anodic oxidation Physica Status Solidi-Rapid Research Letters 10 2016 ), S. 24-38 ISSN: 1862-6254 10.1002/pssr.201510164 Mughrabi H. :The a-factor in the Taylor flow-stress law in monotonic, cyclic and quasi stationary deformations: Dependence on slip mode, dislocation arrangement and density Current Opinion in Solid State & Materials Science 2016 )ISSN: 1359-0286 10.1016/j.cossms.2016.07.001 Mughrabi H. :The α-factor in the Taylor flow-stress law in monotonic, cyclic and quasi-stationary deformations: Dependence on slip mode, dislocation arrangement and density Current Opinion in Solid State & Materials Science 20 2016 ), S. 411-420 ISSN: 1359-0286 10.1016/j.cossms.2016.07.001 Favier V, Blanche A, Wang C, Phung NL, Ranc N, Wagner D, Bathias C, Chrysochoos A, Mughrabi H:Very high cycle fatigue for single phase ductile materials: Comparison between alpha-iron, copper and alpha-brass polycrystals International Journal of Fatigue 93 2016 ), S. 326-338 ISSN: 0142-1123 10.1016/j.ijfatigue.2016.05.034
Mughrabi H. , Antolovich SD. :A tribute to Claude Bathias – Highlights of his pioneering work in Gigacycle Fatigue International Journal of Fatigue 93 2016 ), S. 217-223 ISSN: 0142-1123 10.1016/j.ijfatigue.2016.04.020 Möller J. , Bitzek E. :BDA: A novel method for identifying defects in body-centered cubic crystals MethodsX 3 2016 ), S. 279-288 ISSN: 2215-0161 10.1016/j.mex.2016.03.013 http://www.sciencedirect.com/science/article/pii/S2215016116300036 Möller J. , Prakash A. , Bitzek E. :Multiscale Materials Modeling: Approaches to Full Multiscaling De Gruyter, Berlin 2016 Neumeier S. , Rehman HU. , Neuner J. , Zenk C. , Michel S. , Schuwalow S. , Rogal J. , Drautz R. , Göken M. :Diffusion of solutes in fcc Cobalt investigated by diffusion couples and first principles kinetic Monte Carlo Acta Materialia 106 2016 ), S. 304-312 ISSN: 1359-6454 10.1016/j.actamat.2016.01.028 Nguyen H. , Boehm W. , Tsoupis I. , Göken M. , Höppel HW. , Schmidt C. , Hausöl T. , Ruppert M. , Merklein M. :Tailored heat treated accumulative roll bonded aluminum blanks: failure under bending stresses Production Engineering 10 2016 ), S. 399-407 ISSN: 0944-6524 10.1007/s11740-016-0685-4 Nöhring WG. , Möller J. , Xie Z. , Bitzek E. :Wedge-shaped twins and pseudoelasticity in fcc metallic nanowires under bending Extreme Mechanics Letters 8 2016 )ISSN: 2352-4316 10.1016/j.eml.2016.03.001 Povstugar I. , Zenk C. , Li R. , Choi P-. , Neumeier S. , Dolotko O. , Hoelzel M. , Göken M. , Raabe D. :Elemental partitioning, lattice misfit and creep behaviour of Cr containing γ′ strengthened Co base superalloys Materials Science and Technology 32 2016 ), S. 220-225 ISSN: 0267-0836 10.1179/1743284715Y.0000000112 Prakash A. , Hummel M. , Schmauder S. , Bitzek E. :Nanosculpt: A methodology for generating complex realistic configurations for atomistic simulations MethodsX 3 2016 ), S. 219-230 ISSN: 2215-0161 10.1016/j.mex.2016.03.002 http://www.sciencedirect.com/science/article/pii/S2215016116000157 Pröbstle M. , Neumeier S. , Feldner P. , Rettig R. , Helmer H. , Singer R. , Göken M. :Improved creep strength of nickel-base superalloys by optimized γ/γ′ partitioning behavior of solid solution strengthening elements Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 2016 ), S. 411-420 ISSN: 0921-5093 10.1016/j.msea.2016.08.121 Pröbstle M. , Neumeier S. , Hopfenmüller J. , Freund L. , Niendorf T. , Schwarze D. , Göken M. :Superior creep strength of a nickel-based super alloy produced by selective laser melting Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 674 2016 ), S. 299-307 ISSN: 0921-5093 10.1016/j.msea.2016.07.061 Ruppert M. , Schunk C. , Hausmann D. , Höppel HW. , Göken M. :Global and local strain rate sensitivity of bimodal Al-laminates produced by accumulative roll bonding Acta Materialia 103 2016 ), S. 643-650 ISSN: 1359-6454 10.1016/j.actamat.2015.11.009 Vaid A. , Mittal K. , Sahu S. , Shekhar S. :Controlled Evolution of Coincidence Site Lattice Related Grain Boundaries Transactions of the Indian Institute of Metals 69 2016 ), S. 1745-1753 ISSN: 0975-1645 10.1007/s12666-016-0834-7 Zenk C. , Bauer A. , Goik P. , Neumeier S. , Stone HJ. , Göken M. :Microstructure, Lattice Misfit, and High-Temperature Strength of γ′-Strengthened Co-Al-W-Ge Model Superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 2016 ), S. 2141-2149 ISSN: 1073-5623 10.1007/s11661-016-3408-8 Zenk C. , Neumeier S. , Engl N. , Fries SG. , Dolotko O. , Weiser M. , Virtanen S. , Göken M. :Intermediate Co/Ni-base model superalloys - Thermophysical properties, creep and oxidation Scripta Materialia 112 2016 ), S. 83-86 ISSN: 1359-6462 10.1016/j.scriptamat.2015.09.018 Zenk C. , Neumeier S. , Kolb M. , Volz N. , Fries SG. , Dolotko O. , Povstugar I. , Raabe D. , Göken M. :The role of the base element in γ′ strengthened cobalt/nickel-base superalloys 13th International Symposium on Superalloys, SUPERALLOYS 2016 10.1002/9781119075646.ch103
2015
Amberger D. , Blickle T. , Höppel HW. , Göken M. :Fatigue behavior of calcium containing AZ91 magnesium alloys MP Materials Testing 57 2015 ), S. 126-130 ISSN: 0025-5300 10.3139/120.110694 Bauer A. , Neumeier S. , Pyczak F. , Göken M. :Influence of iridium on the properties of γ′-strengthened co-base superalloys Advanced Engineering Materials 17 2015 ), S. 748-754 ISSN: 1438-1656 10.1002/adem.201400266 Bei GP. , Pedimonte BJ. , Pezoldt M. , Ast J. , Fey T. , Göken M. , Greil P. :Crack Healing in Ti2Al0.5Sn0.5C-Al2O3 Composites Journal of the American Ceramic Society 98 2015 ), S. 1604-1610 ISSN: 0002-7820 10.1111/jace.13496 Bhowmik A. , Neumeier S. , Rhode S. , Stone HJ. :Allotropic transformation induced stacking faults and discontinuous coarsening in a γ-γ′ Co-base alloy Intermetallics 59 2015 ), S. 95-101 ISSN: 0966-9795 10.1016/j.intermet.2014.12.013 Bitzek E. , Kermode JR. , Gumbsch P. :Atomistic aspects of fracture International Journal of Fatigue 191 2015 ), S. 13-30 ISSN: 0142-1123 10.1007/s10704-015-9988-2 Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklenicka V. :Correct Interpretation of Creep Rates: A Case Study of Cu Journal of Materials Science & Technology 31 2015 ), S. 1065-1068 ISSN: 1005-0302 10.1016/j.jmst.2015.09.012 Blum W. , Dvorak J. , Kral P. , Petrenec M. , Eisenlohr P. , Sklenicka V. :In situ study of microstructure and strength of severely predeformed pure Cu in deformation at 573K Philosophical Magazine 95 2015 ), S. 3696-3711 ISSN: 1478-6435 10.1080/14786435.2015.1096025 Blum W. , Eisenlohr P. , Prell M. , Durst K. :Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests Kovove Materialy-Metallic Materials 53 2015 ), S. 199-205 ISSN: 0023-432X 10.4149/km_2015_4_199 Blum W. , Eisenlohr P. , Prell M. , Durst K. :Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests Kovove Materialy-Metallic Materials 53 2015 ), S. 199-205 ISSN: 0023-432X 10.4149/km-2015-4-199 Cairney JM. , Rajan K. , Haley D. , Gault B. , Bagot PJ. , Choi PP. , Felfer P. , Ringer SP. , Marceau RKW. , Moody MP. :Mining information from atom probe data Ultramicroscopy 159 2015 ), S. 324-337 ISSN: 0304-3991 10.1016/j.ultramic.2015.05.006 Choi IC. , Lee DH. , Ahn B. , Durst K. , Kawasaki M. , Langdon TG. , Jang JI. :Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion Scripta Materialia 94 2015 ), S. 44-47 ISSN: 1359-6462 10.1016/j.scriptamat.2014.09.014 Felfer P. , Ceguerra AV. , Ringer SP. , Cairney JM. :Detecting and extracting clusters in atom probe data: A simple, automated method using Voronoi cells Ultramicroscopy 150 2015 ), S. 30-36 ISSN: 0304-3991 10.1016/j.ultramic.2014.11.015 Felfer P. , Li T. , Eder K. , Galinski H. , Magyar AP. , Bell DC. , Smith GDW. , Kruse N. , Ringer SP. , Cairney JM. :New approaches to nanoparticle sample fabrication for atom probe tomography 10.1016/j.ultramic.2015.04.014 Felfer P. , Scherrer B. , Demeulemeester J. , Vandervorst W. , Cairney JM. :Mapping interfacial excess in atom probe data 10.1016/j.ultramic.2015.06.002 Freund L. , Bauer A. , Benker L. , Neumeier S. , Göken M. :Formation of Cuboidal Co3AlC Precipitates in Carbon-Containing Co-Al-W-Based Superalloys Advanced Engineering Materials 17 2015 ), S. 1113-1118 ISSN: 1438-1656 10.1002/adem.201500171 Göken M. , Glatzel U. :DFG Research Training Group 1229 "Stable and Metastable Multi-Phase Systems for Elevated Service Temperatures" Advanced Engineering Materials 17 2015 ), S. 1096-1098 ISSN: 1438-1656 10.1002/adem.201500330 Heinzerling P. , Dräger G. , Kometz A. , Preiß E. :Funktionelle Beschichtungen in der Nanotechnologie - Ein Kooperationsprojekt Schule-Hochschule. Praxis der Naturwissenschaften - Chemie in der Schule 64 2015 ), S. 42-46 ISSN: 1617-5638 Höppel HW. :Ultrafine-Grained Metals Metals 5 2015 ), S. 2393-2396 ISSN: 2075-4701 Klausmann A. , Morita K. , Johanns KE. , Fasel C. , Durst K. , Mera G. , Riedel R. , Ionescu E. :Synthesis and high-temperature evolution of polysilylcarbodiimide-derived SiCN ceramic coatings Journal of the European Ceramic Society 35 2015 ), S. 3771-3780 ISSN: 0955-2219 10.1016/j.jeurceramsoc.2015.07.013 Klöffel T. , Bitzek E. , Meyer B. :Impact of twin boundaries on bulk elastic constants: Density-functional theory data for Young's modulus of Ag Data in Brief 3 2015 ), S. 209-215 ISSN: 2352-3409 10.1016/j.dib.2015.03.005 Kobler A. , Beuth T. , Klöffel T. , Prang R. , Moosmann M. , Seherer T. , Walheim S. , Hahn H. , Kuebel C. , Meyer B. , Schimmel T. , Bitzek E. :Nanotwinned silver nanowires: Structure and mechanical properties Acta Materialia 92 2015 ), S. 299-308 ISSN: 1359-6454 10.1016/j.actamat.2015.02.041 Kossmann J. , Zenk C. , Lopez-Galilea I. , Neumeier S. , Kostka A. , Huth S. , Theisen W. , Göken M. , Drautz R. , Hammerschmidt T. :Microsegregation and precipitates of an as-cast Co-based superalloy-microstructural characterization and phase stability modelling Journal of Materials Science 50 2015 ), S. 6329-6338 ISSN: 0022-2461 10.1007/s10853-015-9177-8 La Fontaine A. , Yen HW. , Felfer P. , Ringer SP. , Cairney JM. :Atom probe study of chromium oxide spinels formed during intergranular corrosion Scripta Materialia 99 2015 ), S. 1-4 ISSN: 1359-6462 10.1016/j.scriptamat.2014.09.028 Li D. , Kunz T. , Wolf N. , Liebig JP. , Wittmann S. , Ahmad T. , Hessmann MT. , Auer R. , Göken M. , Brabec C. :Silicon nitride and intrinsic amorphous silicon double antireflection coatings for thin-film solar cells on foreign substrates Thin Solid Films 583 2015 ), S. 25-33 ISSN: 0040-6090 10.1016/j.tsf.2015.03.051 Lopez-Galilea I. , Zenk C. , Neumeier S. , Huth S. , Theisen W. , Göken M. :The thermal stability of intermetallic compounds in an as-cast SX co-base superalloy Advanced Engineering Materials 17 2015 ), S. 741-747 ISSN: 1438-1656 10.1002/adem.201400249 Maier V. , Schunk C. , Göken M. , Durst K. :Microstructure-dependent deformation behaviour of bcc-metals - indentation size effect and strain rate sensitivity Philosophical Magazine 95 2015 ), S. 1766-1779 ISSN: 1478-6435 10.1080/14786435.2014.982741 Malchow P. , Johanns KE. , Moencke D. , Korte-Kerzel S. , Wondraczek L. , Durst K. :Composition and cooling-rate dependence of plastic deformation, densification, and cracking in sodium borosilicate glasses during pyramidal indentation Journal of Non-Crystalline Solids 419 2015 ), S. 97-109 ISSN: 0022-3093 10.1016/j.jnoncrysol.2015.03.020 Merle B. , Cassel D. , Göken M. :Time-dependent deformation behavior of freestanding and SiNx-supported gold thin films investigated by bulge tests Journal of Materials Research 30 2015 ), S. 2161-2169 ISSN: 0884-2914 10.1557/jmr.2015.184 https://opus4.kobv.de/opus4-fau/files/7997/Merle_time-dependent.pdf Mughrabi H. :Microstructural mechanisms of cyclic deformation, fatigue crack initiation and early crack growth Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences 373 2015 )ISSN: 1364-503X 10.1098/rsta.2014.0132 Möller J. , Bitzek E. :On the influence of crack front curvature on the fracture behavior of nanoscale cracks Engineering Fracture Mechanics 150 2015 ), S. 197-208 ISSN: 0013-7944 10.1016/j.engfracmech.2015.03.028 Neumeier S. , Freund L. , Göken M. :Novel wrought γ/γ′ cobalt base superalloys with high strength and improved oxidation resistance Scripta Materialia 109 2015 ), S. 104-107 ISSN: 1359-6462 10.1016/j.scriptamat.2015.07.030 Niekiel F. , Spiecker E. , Bitzek E. :Influence of anisotropic elasticity on the mechanical properties of fivefold twinned nanowires Journal of the Mechanics and Physics of Solids 84 2015 ), S. 358-379 ISSN: 0022-5096 10.1016/j.jmps.2015.08.004 Prakash A. , Guenole J. , Wang J. , Müller J. , Spiecker E. , Mills MJ. , Povstugar I. , Choi P. , Raabe D. , Bitzek E. :Atom probe informed simulations of dislocation-precipitate interactions reveal the importance of local interface curvature Acta Materialia 92 2015 ), S. 33-45 ISSN: 1359-6454 10.1016/j.actamat.2015.03.050 Prakash A. , Nöhring WG. , Lebensohn RA. , Höppel HW. , Bitzek E. :A multiscale simulation framework of the accumulative roll bonding process accounting for texture evolution Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 631 2015 ), S. 104-119 ISSN: 0921-5093 10.1016/j.msea.2015.02.005 Pyczak F. , Bauer A. , Göken M. , Lorenz U. , Neumeier S. , Oehring M. , Paul J. , Schell N. , Schreyer A. , Stark A. , Symanzik F. :The effect of tungsten content on the properties of L12-hardened Co-Al-W alloys Journal of Alloys and Compounds 632 2015 ), S. 110-115 ISSN: 0925-8388 10.1016/j.jallcom.2015.01.031 Rehman HU. , Durst K. , Neumeier S. , Parsa AB. , Kostka A. , Eggeler G. , Göken M. :Nanoindentation studies of the mechanical properties of the mu phase in a creep deformed Re containing nickel-based superalloy Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 634 2015 ), S. 202-208 ISSN: 0921-5093 10.1016/j.msea.2015.03.045 Rettig R. , Ritter N. , Helmer H. , Neumeier S. , Singer R. :Single-crystal nickel-based superalloys developed by numerical multi-criteria optimization techniques: Design based on thermodynamic calculations and experimental validation Modelling and Simulation in Materials Science and Engineering 23 2015 ), Art.Nr.: 035004 ISSN: 1361-651X 10.1088/0965-0393/23/3/035004 Ruppert M. , Freund L. , Wenzl T. , Höppel HW. , Göken M. :Ultrafine-grained austenitic stainless steels X4CrNi18-12 and X8CrMnNi19-6-3 produced by accumulative roll bonding Metals 5 2015 ), S. 730-742 ISSN: 2075-4701 10.3390/met5020730 Ruppert M. , Strebl M. , Höppel HW. , Göken M. :Mechanical properties of ultrafine-grained AlZnMg(Cu)-alloys AA7020 and AA7075 processed by accumulative roll bonding Journal of Materials Science 50 2015 ), S. 4422-4429 ISSN: 0022-2461 10.1007/s10853-015-9008-y Scherrer B. , Doebeli M. , Felfer P. , Spolenak R. , Cairney J. , Galinski H. :The Hidden Pathways in Dense Energy Materials - Oxygen at Defects in Nanocrystalline Metals Advanced Materials 27 2015 ), S. 6220-6224 ISSN: 0935-9648 10.1002/adma.201503118 Schweiger M. , Schaudig M. , Gannott F. , Killian M. , Bitzek E. , Schmuki P. , Zaumseil J. :Controlling the diameter of aligned single-walled carbon nanotubes on quartz via catalyst reduction time Carbon 95 2015 ), S. 452-459 ISSN: 0008-6223 10.1016/j.carbon.2015.08.058 Sun Z. , Van Petegem S. , Cervellino A. , Durst K. , Blum W. , Van Swygenhoven H. :Dynamic recovery in nanocrystalline Ni Acta Materialia 91 2015 ), S. 91-100 ISSN: 1359-6454 10.1016/j.actamat.2015.03.033 Terberger PJ. , Sebold D. , Webler R. , Ziener M. , Neumeier S. , Klein L. , Virtanen S. , Göken M. , Vassen R. :Isothermal aging of a γ′-strengthened Co-Al-W alloy coated with vacuum plasma-sprayed MCrAlY bond coats Surface & Coatings Technology 276 2015 ), S. 360-367 ISSN: 0257-8972 10.1016/j.surfcoat.2015.06.048 Webler R. , Ziener M. , Neumeier S. , Terberger PJ. , Vassen R. , Göken M. :Evolution of microstructure and mechanical properties of coated Co-base superalloys during heat treatment and thermal exposure Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 628 2015 ), S. 374-381 ISSN: 0921-5093 10.1016/j.msea.2015.01.060
2014
Amodeo J. , Begau C. , Bitzek E. :Atomistic Simulations of Compression Tests on Ni3Al Nanocubes Materials Research Letters 2 2014 ), S. 140-145 ISSN: 2166-3831 10.1080/21663831.2013.878884 Ast J. , Przybilla T. , Maier V. , Durst K. , Göken M. :Microcantilever bending experiments in NiAl - Evaluation, size effects, and crack tip plasticity Journal of Materials Research 29 2014 ), S. 2129-2140 ISSN: 0884-2914 10.1557/jmr.2014.240 Bach J. , Höppel HW. , Prell M. , Göken M. :Crack initiation mechanisms in AA6082 fatigued in the VHCF-regime International Journal of Fatigue 60 2014 ), S. 23-27 ISSN: 0142-1123 10.1016/j.ijfatigue.2013.08.018 Bhowmik A. , Neumeier S. , Barnard JS. , Zenk C. , Göken M. , Rae CMF. , Stone HJ. :Microstructure and mechanical properties of Cr-Ta-Si Laves phase-based alloys at elevated temperatures Philosophical Magazine 94 2014 ), S. 3914-3944 ISSN: 1478-6443 10.1080/14786435.2014.971086 Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklenicka V. :Effect of grain refinement by ECAP on creep of pure Cu Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 590 2014 ), S. 423-432 ISSN: 0921-5093 10.1016/j.msea.2013.10.022 Blum W. , Dvorak J. , Kral P. , Eisenlohr P. , Sklenicka V. :What is "stationary" deformation of pure Cu? Journal of Materials Science 49 2014 ), S. 2987-2997 ISSN: 0022-2461 10.1007/s10853-013-7983-4 Bösch D. , Pogatscher S. , Hummel M. , Fragner W. , Uggowitzer PJ. , Göken M. , Höppel HW. :Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 46 2014 ), S. 1035-1045 ISSN: 1073-5623 10.1007/s11661-014-2700-8 Durst K. , Maier V. :Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals Current Opinion in Solid State & Materials Science 2014 )ISSN: 1359-0286 10.1016/j.cossms.2015.02.001 Felfer P. , Benndorf P. , Masters A. , Maschmeyer T. , Cairney JM. :Revealing the Distribution of the Atoms within Individual Bimetallic Catalyst Nanoparticles Angewandte Chemie International Edition 53 2014 ), S. 11190-11193 ISSN: 1433-7851 10.1002/anie.201405043 Fragner W. , Baumgartner K. , Suppan H. , Hummel M. , Bösch D. , Höppel HW. , Uggowitzer PJ. :Using scrap in recycling alloys for structural applications in the automotive industry Light Metals 2014 - TMS 2014 Annual Meeting and Exhibition (San Diego, CA https://www.scopus.com/record/display.uri?eid=2-s2.0-84899827386∨igin=inward Fried M. , Krechel C. , Affeldt EE. , Eckert B. , Kimmig S. , Retze U. , Höppel HW. , Göken M. :Fatigue crack initiation in nickel-based superalloys studied by microstructure-based FE modeling and scanning electron microscopy MATEC Web of Conferences 14 2014 )ISSN: 2261-236X 10.1051/matecconf/20141416001 Guo W. , Jaegle E. , Yao J. , Maier V. , Korte S. , Schneider JM. , Raabe D. :Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates Acta Materialia 80 2014 ), S. 94-106 ISSN: 1359-6454 10.1016/j.actamat.2014.07.027 Haag F. , Beitelschmidt D. , Eckert J. , Durst K. :Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending - A nanoindentation and atomic force microscopy study Acta Materialia 70 2014 ), S. 188-197 ISSN: 1359-6454 10.1016/j.actamat.2014.01.053 He MR. , Felfer P. , Dasgupta S. , Samudrala SK. , Malone PJ. , Feng G. , Hemker KJ. , Cairney JM. , Gianola DS. :Understanding the mechanical behavior of nanocrystalline Al-O thin films with complex microstructures Acta Materialia 77 2014 ), S. 269-283 ISSN: 1359-6454 10.1016/j.actamat.2014.05.058 He WJ. , Zhang SH. , Prakash A. , Helm D. :A hierarchical multi-scale model for hexagonal materials taking into account texture evolution during forming simulation Computational Materials Science 82 2014 ), S. 464-475 ISSN: 0927-0256 10.1016/j.commatsci.2013.10.023 Lapovok R. , Qi Y. , Ng HP. , Maier V. , Estrin Y. :Multicomponent materials from machining chips compacted by equal-channel angular pressing Journal of Materials Science 49 2014 ), S. 1193-1204 ISSN: 0022-2461 10.1007/s10853-013-7801-z Lee S. , Im J. , Yoo Y. , Bitzek E. , Kiener D. , Richter G. , Kim B. , Oh SH. :Reversible cyclic deformation mechanism of gold nanowires by twinning-detwinning transition evidenced from in situ TEM Nature Communications 5 2014 ), Art.Nr.: 3033 ISSN: 2041-1723 10.1038/ncomms4033 Magagnosc DJ. , Kumar G. , Schroers J. , Felfer P. , Cairney JM. , Gianola DS. :Effect of ion irradiation on tensile ductility, strength and fictive temperature in metallic glass nanowires Acta Materialia 74 2014 ), S. 165-182 ISSN: 1359-6454 10.1016/j.actamat.2014.04.002 Marr T. , Freudenberger J. , Maier V. , Höppel HW. , Göken M. , Schultz L. :The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire Metals 4 2014 ), S. 37-54 ISSN: 2075-4701 10.3390/met4010037 Merle B. , Göken M. :Bulge fatigue testing of freestanding and supported gold films Journal of Materials Research 29 2014 ), S. 267-276 ISSN: 0884-2914 10.1557/jmr.2013.373 https://opus4.kobv.de/opus4-fau/files/6426/merle_bulge.pdf Merle B. , Maier V. , Durst K. :Experimental and theoretical confirmation of the scaling exponent 2 in pyramidal load displacement data for depth sensing indentation Scanning 36 2014 ), S. 526-529 ISSN: 0161-0457 10.1002/sca.21151 Mughrabi H. :Comment on 'Constant intermittent flow of dislocations: Central problems in plasticity' by L. M. Brown Journal of Materials Science & Technology 30 2014 ), S. 123-126 ISSN: 1005-0302 10.1179/1743284713Y.0000000224 Mughrabi H. :The importance of sign and magnitude of γ/γ′ lattice misfit in superalloys - With special reference to the new γ′-hardened cobalt-base superalloys Acta Materialia 81 2014 ), S. 21-29 ISSN: 1359-6454 10.1016/j.actamat.2014.08.005 Möller J. , Bitzek E. :Comparative study of embedded atom potentials for atomistic simulations of fracture in α-iron Modelling and Simulation in Materials Science and Engineering 22 2014 ), Art.Nr.: 045002 ISSN: 0965-0393 10.1088/0965-0393/22/4/045002 Möller J. , Bitzek E. :Fracture toughness and bond trapping of grain boundary cracks Acta Materialia 73 2014 ), S. 1-11 ISSN: 1359-6454 10.1016/j.actamat.2014.03.035 Neumeier S. , Pröbstle M. , Huenert D. , Göken M. :Tensile and creep strength of thermally exposed allvac 718Plus 8th International Symposium on Superalloy 718 and Derivatives 2014 In: Proceedings of 8th International Symposium on Superalloy 718 and Derivatives 2014 2014 https://www.scopus.com/record/display.uri?eid=2-s2.0-84923090036∨igin=inward Niekiel F. , Bitzek E. , Spiecker E. :Combining atomistic simulation and x-ray diffraction for the characterization of nanostructures: A case study on fivefold twinned nanowires Acs Nano 8 2014 ), S. 1629-1638 ISSN: 1936-0851 10.1021/nn405941m Phung NL. , Favier V. , Ranc N. , Vales F. , Mughrabi H. :Very high cycle fatigue of copper: Evolution, morphology and locations of surface slip markings International Journal of Fatigue 63 2014 ), S. 68-77 ISSN: 0142-1123 10.1016/j.ijfatigue.2014.01.007 Povstugar I. , Choi PP. , Neumeier S. , Bauer A. , Zenk C. , Göken M. , Raabe D. :Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation Acta Materialia 78 2014 ), S. 78-85 ISSN: 1359-6454 10.1016/j.actamat.2014.06.020 Ruppert M. , Höppel HW. , Göken M. :Influence of cross-rolling on the mechanical properties of an accumulative roll bonded aluminum alloy AA6014 Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 597 2014 ), S. 122-127 ISSN: 0921-5093 10.1016/j.msea.2013.12.075 Schmid C. , Hetzner H. , Tremmel S. , Hilpert F. , Durst K. :Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings Advanced Materials Research 996 2014 ), S. 14–21 ISSN: 1022-6680 10.4028/www.scientific.net/AMR.996.14 https://www.mfk.uni-erlangen.de?file=pubmfk_5637d06159362 Umeno Y. , Nöhring WG. , Iskandarov A. , Bitzek E. :Atomistic model analysis of local and global instabilities in crystals at finite temperature Key Engineering Materials 592-593 2014 ), S. 39-42 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.592-593.39 Webler R. , Neumeier S. , Göken M. :Characterization of oxidation protection coatings for high temperature applications by means of nanoindentation and scanning electron microscopy methods Praktische Metallographie 51 2014 ), S. 568-582 ISSN: 0032-678X 10.3139/147.110310 Young DJ. , Thuan Dinh Nguyen . , Felfer P. , Zhang J. , Cairney JM. :Penetration of protective chromia scales by carbon Scripta Materialia 77 2014 ), S. 29-32 ISSN: 1359-6462 10.1016/j.scriptamat.2014.01.009 Zenk C. , Neumeier S. , Stone HJ. , Göken M. :Mechanical properties and lattice misfit of γ/γ' strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system Intermetallics 55 2014 ), S. 28-39 ISSN: 0966-9795 10.1016/j.intermet.2014.07.006
2013
Ahmed F. , Krottenthaler M. , Schmid C. , Durst K. :Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy Surface & Coatings Technology 237 2013 ), S. 255-260 ISSN: 0257-8972 10.1016/j.surfcoat.2013.07.025 Amberger D. , Blickle T. , Höppel HW. , Göken M. :Fatigue Behavior of Calcium Containing AZ91 Magnesium Alloys In: T. Beck , E. Charkaluk E. (Hrsg.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013 10.3139/120.110694 Ast J. , Durst K. :Nanoforming behaviour and microstructural evolution during nanoimprinting of ultrafine-grained and nanocrystalline metals Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 568 2013 ), S. 68-75 ISSN: 0921-5093 10.1016/j.msea.2012.11.056 Bach J. , Göken M. , Bitzek E. , Höppel HW. :Influence of specimen geometry on temperature increase during ultrasonic fatigue testing Ultrasonics 53 2013 ), S. 1412-1416 ISSN: 1874-9968 10.1016/j.ultras.2013.04.021 Bach J. , Höppel HW. , Bitzek E. , Göken M. :Influence of specimen geometry on temperature increase during ultrasonic fatigue testing Ultrasonics 53 2013 ), S. 1412-1416 ISSN: 0041-624X 10.1016/j.ultras.2013.04.021 Bach J. , Höppel HW. , Bitzek E. , Göken M. :Influence of specimen geometry on temperature increase during ultrasonic fatigue testing Ultrasonics 53 2013 ), S. 1412-1416 ISSN: 0041-624X 10.1016/j.ultras.2013.04.021 Bach J. , Liebig JP. , Höppel HW. , Blum W. :Influence of grain boundaries on the deformation resistance: Insights from an investigation of deformation kinetics and microstructure of copper after predeformation by ECAP Philosophical Magazine 93 2013 ), S. 4331-4354 ISSN: 0031-8086 10.1080/14786435.2013.828161 Bitzek E. , Gumbsch P. :Mechanisms of dislocation multiplication at crack tips Acta Materialia 61 2013 ), S. 1394-1403 ISSN: 1359-6454 10.1016/j.actamat.2012.11.016 Ceguerra AV. , Breen AJ. , Stephenson LT. , Felfer P. , Araullo-Peters VJ. , Liddicoat PV. , Cui X. , Yao L. , Haley D. , Moody MP. , Gault B. , Cairney JM. , Ringer SP. :The rise of computational techniques in atom probe microscopy Current Opinion in Solid State & Materials Science 17 2013 ), S. 224-235 ISSN: 1359-0286 10.1016/j.cossms.2013.09.006 Chekhonin P. , Scharnweber J. , Scharnweber M. , Oertel C-. , Hausöl T. , Höppel HW. , Jaschinski J. , Marr T. , Skrotzki W. :Mechanical properties of aluminium laminates produced by accumulative roll bonding Crystal Research and Technology 48 2013 ), S. 532-537 ISSN: 0232-1300 10.1002/crat.201300121 Depner-Miller U. , Ellermeier J. , Scheerer H. , Oechsner M. , Bobzin K. , Bagcivan N. , Broegelmann T. , Weiss R. , Durst K. , Schmid C. :Influence of application technology on the erosion resistance of DLC coatings Surface & Coatings Technology 237 2013 ), S. 284-291 ISSN: 0257-8972 10.1016/j.surfcoat.2013.07.043 Felfer P. , Ceguerra A. , Ringer S. , Cairney J. :Applying computational geometry techniques for advanced feature analysis in atom probe data Ultramicroscopy 132 2013 ), S. 100-106 ISSN: 0304-3991 10.1016/j.ultramic.2013.03.004 Gault B. , Felfer P. , Ivermark M. , Bergqvist H. , Cairney JM. , Ringer SP. :Atom probe microscopy characterization of as quenched Zr-0.8 wt% Fe and Zr-0.15 wt% Cr binary alloys Materials Letters 91 2013 ), S. 63-66 ISSN: 0167-577X 10.1016/j.matlet.2012.09.059 Göken M. , Hausöl T. , Höppel HW. :Fatigue Life, Cyclic Deformation Behaviour and Damage Mechanisms of Ultrafine-Grained AA5754 Aluminum Alloy Produced by Accumulative Roll Bonding In: T. Beck , E. Charkaluk E. (Hrsg.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013 Hay J. , Maier V. , Durst K. , Göken M. :Strain-rate sensitivity (SRS) of nickel by instrumented indentation 2012 Annual Conference on Experimental and Applied Mechanics (Costa Mesa, CA 10.1007/978-1-4614-4436-7_8 Hay J. , Maier V. , Durst K. , Göken M. :Strain rate sensitivity (SRS) of Nickel by Instrumented Indentation In: Conference Proceedings of the Society for Experimental Mechanics Series 6 2013 10.1007/978-1-4614-4436-7_8 Hoi Pang Ng . , Przybilla T. , Schmidt C. , Lapovok R. , Orlov D. , Höppel HW. , Göken M. :Asymmetric accumulative roll bonding of aluminium-titanium composite sheets Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 576 2013 ), S. 306-315 ISSN: 0921-5093 10.1016/j.msea.2013.04.027 Hoi Pang Ng . , Przybilla T. , Schmidt C. , Lapovok R. , Orlov D. , Höppel HW. , Göken M. :Asymmetric accumulative roll bonding of aluminium–titanium composite sheets Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 576 2013 ), S. 306-315 ISSN: 0921-5093 10.1016/j.msea.2013.04.027 Kommer M. , Schwub S. , Göken M. , Höppel HW. , Freudenberger J. :Cyclic Deformation Behaviour and Damage Mechanisms in CuAgZr Alloys In: T. Beck , E. Charkaluk E. (Hrsg.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013 Krottenthaler M. , Schmid C. , Schaufler J. , Durst K. , Göken M. :A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation Surface & Coatings Technology 215 2013 ), S. 247-252 ISSN: 0257-8972 10.1016/j.surfcoat.2012.08.095 Kurtovic A. , Niendorf T. , Hausöl T. , Höppel HW. , Göken M. , Maier HJ. :Surface strain evolution of ultrafine-grained aluminum alloy laminates under tension-Microscale plastic instabilities and the Portevin-Le Chatelier effect Scripta Materialia 68 2013 ), S. 809-812 ISSN: 1359-6462 10.1016/j.scriptamat.2013.01.036 Kurtovic A. , Niendorf T. , Hausöl T. , Höppel HW. , Göken M. , Maier HJ. :Surface strain evolution of ultrafme-grained aluminum alloy laminates under tension - Microscale plastic instabilities and the Portevin-Le Chatelier effect Scripta Materialia 68 2013 ), S. 809-812 ISSN: 1359-6462 10.1016/j.scriptamat.2013.01.036 Maier V. , Merle B. , Göken M. , Durst K. :An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures Journal of Materials Research 28 2013 ), S. 1177-1188 ISSN: 0884-2914 10.1557/jmr.2013.39 https://opus4.kobv.de/opus4-fau/frontdoor/deliver/index/docId/5014/file/Maier_Improved.pdf Mughrabi H. :Cyclic slip irreversibility and fatigue life: A microstructure-based analysis Acta Materialia 61 2013 ), S. 1197-1203 ISSN: 1359-6454 10.1016/j.actamat.2012.10.029 Mughrabi H. :Cyclic strain rate effects in fatigued face-centred and body-centred cubic metals Philosophical Magazine 93 2013 ), S. 3821-3834 ISSN: 0031-8086 10.1080/14786435.2013.779396 Mughrabi H. :Damage mechanisms and fatigue lives: From the low to the very high cycle regime Procedia Engineering 55 2013 ), S. 636-644 ISSN: 1877-7058 10.1016/j.proeng.2013.03.307 Mughrabi H. :Microstructural fatigue mechanisms: Cyclic slip irreversibility, crack initiation, non-linear elastic damage analysis International Journal of Fatigue 57 2013 ), S. 2-8 ISSN: 0142-1123 10.1016/j.ijfatigue.2012.06.007 Möller J. , Prakash A. , Bitzek E. :FE2AT - Finite element informed atomistic simulations Modelling and Simulation in Materials Science and Engineering 21 2013 )ISSN: 0965-0393 10.1088/0965-0393/21/5/055011 Niendorf T. , Boehner A. , Höppel HW. , Göken M. , Valiev RZ. , Maier HJ. :Comparison of the monotonic and cyclic mechanical properties of ultrafine-grained low carbon steels processed by continuous and conventional equal channel angular pressing Materials & Design 47 2013 ), S. 138-142 ISSN: 0264-1275 10.1016/j.matdes.2012.12.025 Pyczak F. , Bauer A. , Göken M. , Neumeier S. , Lorenz U. , Oehring M. , Schell N. , Schreyer A. , Stark A. , Symanzik F. :Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 571 2013 ), S. 13-18 ISSN: 0921-5093 10.1016/j.msea.2013.02.007 Pyczak F. , Bauer A. , Göken M. , Neumeier S. , Lorenz U. , Oehring M. , Schell N. , Schreyer A. , Stark A. , Symanzik F. :Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 571 2013 ), S. 13-18 ISSN: 0921-5093 10.1016/j.msea.2013.02.007 Quentin UH. , Heberle J. , Held CC. , Schmidt M. :Laser Droplet Brazing for Electrical Contacting of Composite Materials with Integrated Active Elements Procedia Materials Science 2 2013 ), S. 181-188 ISSN: 2211-8128 10.1016/j.mspro.2013.02.022 http://www.sciencedirect.com/science/article/pii/S2211812813000230 Rahim M. , Frenzel J. , Frotscher M. , Pfetzing-Micklich J. , Steegmueller R. , Wohlschloegel M. , Mughrabi H. , Eggeler G. :Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys Acta Materialia 61 2013 ), S. 3667-3686 ISSN: 1359-6454 10.1016/j.actamat.2013.02.054 Ruppert M. , Böhm W. , Nguyen H. , Höppel HW. , Merklein M. , Göken M. :Influence of upscaling accumulative roll bonding on the homogeneity and mechanical properties of AA1050A Journal of Materials Science 48 2013 ), S. 8377-8385 ISSN: 0022-2461 10.1007/s10853-013-7648-3 Samudrala SK. , Felfer P. , Araullo-Peters VJ. , Cao Y. , Liao XZ. , Cairney JM. :New atom probe approaches to studying segregation in nanocrystalline materials Ultramicroscopy 132 2013 ), S. 158-163 ISSN: 0304-3991 10.1016/j.ultramic.2012.12.013 Schmid C. , Maier V. , Schaufler J. , Butz B. , Spiecker E. , Meier S. , Göken M. , Durst K. :Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy Thin Solid Films 528 2013 ), S. 263-268 ISSN: 0040-6090 10.1016/j.tsf.2012.05.092 Umeno Y. , Nöhring WG. , Iskandarov A. , Bitzek E. :Atomistic Model Analysis of Local and Global Instabilities in Crystals at Finite Temperature Key Engineering Materials 592-593 2013 ), S. 39-42 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.592-593.39 https://www.scientific.net/KEM.592-593.39 Walter C. , Wheeler JM. , Barnard JS. , Raghavan R. , Korte S. , Gille P. , Michler J. , Clegg WJ. :Anomalous yielding in the complex metallic alloy Al13Co4 Acta Materialia 61 2013 ), S. 7189-7196 ISSN: 1359-6454 10.1016/j.actamat.2013.08.023 Wheeler JM. , Maier V. , Durst K. , Göken M. , Michler J. :Activation parameters for deformation of ultrafine-grained aluminium as determined by indentation strain rate jumps at elevated temperature Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 585 2013 ), S. 108-113 ISSN: 0921-5093 10.1016/j.msea.2013.07.033 Xiang Y. , Chitry V. , Liddicoat P. , Felfer P. , Cairney J. , Ringer S. , Kruse N. :Long-Chain Terminal Alcohols through Catalytic CO Hydrogenation Journal of the American Chemical Society 135 2013 ), S. 7114-7117 ISSN: 0002-7863 10.1021/ja402512r Xie KY. , Shrestha S. , Cao Y. , Felfer P. , Wang Y. , Liao X. , Cairney JM. , Ringer SP. :The effect of pre-existing defects on the strength and deformation behavior of α-Fe nanopillars Acta Materialia 61 2013 ), S. 439-452 ISSN: 1359-6454 10.1016/j.actamat.2012.09.022 Xie KY. , Shrestha SL. , Felfer P. , Cairney JM. , Killmore CR. , Carpenter KR. , Kaul HR. , Ringer SP. :High strength and retained ductility achieved in a nitrided strip cast Nb-microalloyed steel Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 44 2013 ), S. 848-855 ISSN: 1073-5623 10.1007/s11661-012-1446-4
2012
Alam T. , Felfer P. , Chaturvedi M. , Stephenson LT. , Kilburn MR. , Cairney JM. :Segregation of B, P, and C in the ni-based superalloy, Inconel 718 Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 2012 ), S. 2183-2191 ISSN: 1073-5623 10.1007/s11661-012-1085-9 Amberger D. , Eisenlohr P. , Göken M. :On the importance of a connected hard-phase skeleton for the creep resistance of Mg alloys Acta Materialia 60 2012 ), S. 2277-2289 ISSN: 1359-6454 10.1016/j.actamat.2012.01.017 Batentschuk M. , Geisler R. , Hum J. , Iqbal F. , Meister F. , Osvet A. , Stiegelschmitt A. , Winnacker A. :Eu2+ and Eu3+ based "concentrated phosphors" as converters for UV LED light: two approaches and two new examples Applied Physics B-Lasers and Optics 106 2012 ), S. 211-221 ISSN: 0946-2171 10.1007/s00340-011-4735-5 Bauer A. , Neumeier S. , Pyczak F. , Göken M. :Creep Strength and Microstructure of Polycrystalline γ′ - Strengthened Cobalt-Base Superalloys 10.1002/9781118516430.ch77 Bauer A. , Neumeier S. , Pyczak F. , Singer R. , Göken M. :Creep properties of different γ'-strengthened Co-base superalloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 550 2012 ), S. 333-341 ISSN: 0921-5093 10.1016/j.msea.2012.04.083 Bestmann M. , Pennacchioni G. , Nielsen S. , Göken M. , de Wall H. :Deformation and ultrafine dynamic recrystallization of quartz in pseudotachylyte-bearing brittle faults: A matter of a few seconds Journal of Structural Geology 38 2012 ), S. 21-38 ISSN: 0191-8141 10.1016/j.jsg.2011.10.001 Bitzek E. :Atomistic Study of Twinning in Gold Nanowhiskers Journal of Solid Mechanics and Materials Engineering 6 2012 ), S. 99-105 ISSN: 1880-9871 10.1299/jmmp.6.99 Boehner A. , Niendorf T. , Amberger D. , Höppel HW. , Göken M. , Maier HJ. :Martensitic transformation in ultrafine-grained stainless steel AISI 304l under monotonic and cyclic loading Metals 2 2012 ), S. 56-64 ISSN: 2075-4701 10.3390/met2010056 Böhner A. , Höppel HW. , May J. , Göken M. :Influence of the ECAP processing parameters on the cyclic deformation behavior on ultrafine-grained cubic face centered metals Advanced Engineering Materials 14 2012 ), S. 842-847 ISSN: 1438-1656 10.1002/adem.201100217 Chekhonin P. , Beausir B. , Scharnweber J. , Oertel CG. , Hausöl T. , Höppel HW. , Brokmeier HG. , Skrotzki W. :Confined recrystallization of high-purity aluminium during accumulative roll bonding of aluminium laminates Acta Materialia 60 2012 ), S. 4661-4671 ISSN: 1359-6454 10.1016/j.actamat.2012.04.004 Chekhonin P. , Beausir B. , Scharnweber J. , Oertel CG. , Jaschinski J. , Hausöl T. , Höppel HW. , Brokmeier HG. , Skrotzki W. :Mechanical anisotropy of aluminium laminates produced by ARB Materials Science Forum 702-703 2012 ), S. 151-156 ISSN: 0255-5476 10.4028/www.scientific.net/MSF.702-703.151 Durst K. , Rehman HU. , Merle B. :Comment to paper "penetration depth and tip radius dependence on the correction factor in nanoindentation measurements" by J.M. Meza et al. [J. Mater. Res. 23(3), 725 (2008)] Journal of Materials Research 27 2012 ), S. 1205-1207 ISSN: 0884-2914 10.1557/jmr.2012.41 Felfer P. , Alam T. , Ringer SP. , Cairney JM. :A reproducible method for damage-free site-specific preparation of atom probe tips from interfaces Microscopy Research and Technique 75 2012 ), S. 484-491 ISSN: 1059-910X 10.1002/jemt.21081 Felfer P. , Gault B. , Sha G. , Stephenson L. , Ringer SP. , Cairney JM. :A new approach to the determination of concentration profiles in atom probe tomography Microscopy and Microanalysis 18 2012 ), S. 359-364 ISSN: 1431-9276 10.1017/S1431927611012530 Felfer P. , Killmore CR. , Williams JG. , Carpenter KR. , Ringer SP. , Cairney JM. :A quantitative atom probe study of the Nb excess at prior austenite grain boundaries in a Nb microalloyed strip-cast steel Acta Materialia 60 2012 ), S. 5049-5055 ISSN: 1359-6454 10.1016/j.actamat.2012.06.013 Göken Mathias, Höppel Heinz Werner, Hausöl Tina, Bach Jochen, Maier Verena, Schmidt Christian W., Amberger Dorothea:Grain refinement and deformation mechanisms in heterogeneous ultrafine-grained materials processed by accumulative roll bonding Proceedings of the 33rd Risø International Symposium on Materials Science In: Nanometals - status and perspective 2012
Göken M. , Höppel HW. , Hausöl T. , Bach J. , Maier V. , Schmidt C. , Amberger D. :GRAIN REFINEMENT AND DEFORMATION MECHANISMS IN HETEROGENEOUS ULTRAFINE-GRAINED MATERIALS PROCESSED BY ACCUMULATIVE ROLL BONDING Göken M. , Webler R. , Krottenthaler M. , Neumeier S. , Durst K. :Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests John Wiley and Sons 2012 ISBN: 9780470943205 10.1002/9781118516430.ch10 Hausöl T. , Höppel HW. , Göken M. :Ultrafine-grained AA6014/AA5754 laminates produced by accumulative roll bonding (ARB) Materialwissenschaft und Werkstofftechnik 43 2012 ), S. 334-339 ISSN: 0933-5137 10.1002/mawe.201200950 Hausöl T. , Schmidt C. , Maier V. , Böhm W. , Nguyen MH. , Merklein M. , Höppel HW. , Göken M. :Formability of ultrafine-grained AA6016 sheets processed by accumulative roll bonding Key Engineering Materials 504-506 2012 ), S. 575-580 ISSN: 1013-9826 10.4028/www.scientific.net/KEM.504-506.575 Heckl A. , Cenanovic S. , Göken M. , Singer R. :Discontinuous precipitation and phase stability in Re- and Ru-containing nickel-base superalloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 2012 ), S. 10-19 ISSN: 1073-5623 10.1007/s11661-011-0833-6 Held CC. , Quentin UH. , Heberle J. , Gürtler FJ. , Weigl M. , Schmidt M. :Laser Droplet Brazing for the Electrical Contacting of Composite Materials with Integrated Active Elements Physics Procedia 39 2012 ), S. 585-593 ISSN: 1875-3892 10.1016/j.phpro.2012.10.077 http://www.sciencedirect.com/science/article/pii/S1875389212026041 Hetzner H. , Schaufler J. , Pejic G. , Tremmel S. , Durst K. , Wartzack S. :Investigation on the tribological-mechanical behavior of amorphous carbon coatings by load-scanning tests Materialwissenschaft und Werkstofftechnik 43 2012 ), S. 226-233 ISSN: 0933-5137 10.1002/mawe.201200846 Hetzner H. , Schaufler J. , Tremmel S. , Durst K. , Wartzack S. :Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests Surface & Coatings Technology 206 2012 ), S. 4864-4871 ISSN: 0257-8972 10.1016/j.surfcoat.2012.05.077 Hetzner H. , Schaufler J. , Tremmel S. , Durst K. , Wartzack S. :Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests Surface & Coatings Technology 212 2012 ), S. 46 - 54 ISSN: 0257-8972 10.1016/j.surfcoat.2012.09.012 Howie PR. , Korte S. , Clegg WJ. :Fracture modes in micropillar compression of brittle crystals Journal of Materials Research 27 2012 ), S. 141-151 ISSN: 0884-2914 10.1557/jmr.2011.256 Höppel HW. , Pippan R. , Motz C. , Le Bourhis E. :Nanostructured materials Advanced Engineering Materials 14 2012 )ISSN: 1438-1656 10.1002/adem.201200306 Höppel HW. , Pippan R. , Motz C. , Le Bourhis E. :Nanostructured Materials Advanced Engineering Materials 14 2012 ), S. 941-941 ISSN: 1438-1656 10.1002/adem.201200306 Iqbal F. , Ast J. , Göken M. , Durst K. :In situ micro-cantilever tests to study fracture properties of NiAl single crystals Acta Materialia 60 2012 ), S. 1193-1200 ISSN: 1359-6454 10.1016/j.actamat.2011.10.060 Korte S. , Clegg WJ. :Studying plasticity in hard and soft Nb-Co intermetallics Advanced Engineering Materials 14 2012 ), S. 991-997 ISSN: 1438-1656 10.1002/adem.201200175 Korte S. , Stearn RJ. , Wheeler JM. , Clegg WJ. :High temperature microcompression and nanoindentation in vacuum Journal of Materials Research 27 2012 ), S. 167-176 ISSN: 0884-2914 10.1557/jmr.2011.268 Maier V. , Hausöl T. , Schmidt C. , Böhm W. , Hung Nguyen . , Merklein M. , Höppel HW. , Göken M. :Tailored heat treated accumulative roll bonded aluminum blanks: Microstructure and mechanical behavior Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 2012 ), S. 3097-3107 ISSN: 1073-5623 10.1007/s11661-012-1151-3 Merle B. , Durst K. , Hamad-Ur-Rehman . :Comment to paper "Penetration depth and tip radius dependence on the correction factor in nanoindentation measurements" by JM Meza et al. [J. Mater. Res. 23(3), 725 (2008)] Journal of Materials Research 27 2012 ), S. 1205-1207 ISSN: 0884-2914 10.1557/jmr.2012.41 Merle B. , Maier V. , Göken M. , Durst K. :Experimental determination of the effective indenter shape and epsilon-factor for nanoindentation by continuously measuring the unloading stiffness Journal of Materials Research 27 2012 ), S. 214-221 ISSN: 0884-2914 10.1557/jmr.2011.245 https://opus4.kobv.de/opus4-fau/files/2988/merle_experimental_4245.pdf Merle B. , Maier V. , Göken M. , Durst K. :Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness Journal of Materials Research 27 2012 ), S. 214-221 ISSN: 0884-2914 10.1557/jmr.2011.245 https://opus4.kobv.de/opus4-fau/files/2988/merle_experimental_4245.pdf Merle B. , Schweitzer E. , Göken M. :Thickness and grain size dependence of the strength of copper thin films as investigated with bulge tests and nanoindentations Philosophical Magazine 92 2012 ), S. 3172-3187 ISSN: 0031-8086 10.1080/14786435.2012.685773 Meszaros R. , Merle B. , Wild M. , Durst K. , Göken M. , Wondraczek L. :Effect of thermal annealing on the mechanical properties of low-emissivity physical vapor deposited multilayer-coatings for architectural applications Thin Solid Films 520 2012 ), S. 7130-7135 ISSN: 0040-6090 10.1016/j.tsf.2012.07.086 Mompiou F. , Caillard D. , Legros M. , Mughrabi H. :In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium Acta Materialia 60 2012 ), S. 3402-3414 ISSN: 1359-6454 10.1016/j.actamat.2012.02.049 Neumeier S. , Webler R. , Krottenthaler M. , Durst K. , Göken M. :Local fracture toughness and residual stress measurements on NiAl bond coats by micro cantilever and fib-based bar milling tests 12th International Symposium on Superalloys, Superalloys 2012 (Seven Springs, PA https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84885926632∨igin=inward Rehman HU. , Ahmed F. , Schmid C. , Schaufler J. , Durst K. :Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and cohesive zone FEM modeling Surface & Coatings Technology 207 2012 ), S. 163-169 ISSN: 0257-8972 10.1016/j.surfcoat.2012.06.049 Sarkar S. , Li J. , Cox WT. , Bitzek E. , Lenosky TJ. , Wang Y. :Finding activation pathway of coupled displacive-diffusional defect processes in atomistics: Dislocation climb in fcc copper Physical Review B 86 2012 )ISSN: 0163-1829 10.1103/PhysRevB.86.014115 Schaufler J. , Durst K. , Haas T. , Nolte R. , Höppel HW. , Göken M. :The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens International Journal of Fatigue 37 2012 ), S. 1-7 ISSN: 0142-1123 10.1016/j.ijfatigue.2011.09.008 Schaufler J. , Schmid C. , Durst K. , Göken M. :Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending Thin Solid Films 522 2012 ), S. 480-484 ISSN: 0040-6090 10.1016/j.tsf.2012.08.031 Schloffer M. , Iqbal F. , Gabrisch H. , Schwaighofer E. , Schimansky FP. , Mayer S. , Stark A. , Lippmann T. , Göken M. , Pyczak F. , Clemens H. :Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy Intermetallics 22 2012 ), S. 231-240 ISSN: 0966-9795 10.1016/j.intermet.2011.11.015 Schloffer M. , Iqbal F. , Gabrisch H. , Schwaighofer E. , Schimansky FP. , Mayer S. , Stark A. , Lippmann T. , Göken M. , Pyczak F. , Clemens H. :Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy Intermetallics 22 2012 ), S. 231-240 ISSN: 0966-9795 10.1016/j.intermet.2011.11.015 Schmidt C. , Ruppert M. , Höppel HW. , Nachtrab F. , Dietrich A. , Hanke R. , Göken M. :Design of graded materials by particle reinforcement during accumulative roll bonding Advanced Engineering Materials 14 2012 ), S. 1009-1017 ISSN: 1438-1656 10.1002/adem.201200046 Sedlmayr A. , Bitzek E. , Gianola DS. , Richter G. , Moenig R. , Kraft O. :Existence of two twinning-mediated plastic deformation modes in Au nanowhiskers Acta Materialia 60 2012 ), S. 3985-3993 ISSN: 1359-6454 10.1016/j.actamat.2012.03.018 Wartzack S. , Pejic G. , Durst K. , Schaufler J. , Hetzner H. , Tremmel S. :Untersuchung des tribologisch-mechanischen Verhaltens amorpher Kohlenstoffschichten mittels Load Scanner 43 2012 ), S. 226-233 ISSN: 0933-5137 10.1002/mawe.201200846 Yasir M. , Mori G. , Wieser H. , Reller A. , Höppel HW. :Study of sensitization and different heating cycles on stainless steels used for automotive exhaust components Materials and Corrosion-Werkstoffe und Korrosion 63 2012 ), S. 763-776 ISSN: 0947-5117 10.1002/maco.201106255
2011
Bestmann M. , Pennacchioni G. , Frank G. , Göken M. , de Wall H. :Pseudotachylyte in muscovite-bearing quartzite: Coseismic friction-induced melting and plastic deformation of quartz Journal of Structural Geology 33 2011 ), S. 169-186 ISSN: 0191-8141 10.1016/j.jsg.2010.10.009 Bhowmik A. , Pang HT. , Neumeier S. , Stone HJ. , Edmonds I. :Microstructure and oxidation resistance of Cr-Ta-Si alloys 2010 MRS Fall Meeting (USA 29. November 2010 - 3. Dezember 2010 )In: Materials Research Society Symposium Proceedings 2011 10.1557/opl.2011.38 Blum W. , Eisenlohr P. :Structure evolution and deformation resistance in production and application of ultrafine-grained materials - The concept of steady-state grains Materials Science Forum 683 2011 ), S. 163-181 ISSN: 0255-5476 10.4028/www.scientific.net/MSF.683.163 Blum W. , Li YJ. , Zhang Y. , Wang JT. :Deformation resistance in the transition from coarse-grained to ultrafine-grained Cu by severe plastic deformation up to 24 passes of ECAP Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 2011 ), S. 8621-8627 ISSN: 0921-5093 10.1016/j.msea.2011.08.010 Blum W. , Zeng XH. :Corrigendum to “A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity” (Acta Materialia (2009) 57 (1966-1974)) Acta Materialia 59 2011 )ISSN: 1359-6454 10.1016/j.actamat.2011.05.032 Blum W. , Zeng XH. :Erratum: A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity (Acta Materialia (2009) 57 (1966-1974)) Acta Materialia 59 2011 ), S. 6205-6206 ISSN: 1359-6454 10.1016/j.actamat.2011.05.032 Boehner A. , Maier V. , Durst K. , Höppel HW. , Göken M. :Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials Advanced Engineering Materials 13 2011 ), S. 251-255 ISSN: 1438-1656 10.1002/adem.201000270 Felfer P. , Ringer SP. , Cairney JM. :Shaping the lens of the atom probe: Fabrication of site specific, oriented specimens and application to grain boundary analysis Ultramicroscopy 111 2011 ), S. 435-439 ISSN: 0304-3991 10.1016/j.ultramic.2010.12.005 Franke O. , Göken M. , Meyers MA. , Durst K. , Hodge AM. :Dynamic nanoindentation of articular porcine cartilage Materials Science and Engineering C 31 2011 ), S. 789-795 ISSN: 0928-4931 10.1016/j.msec.2010.12.005 Göken M. , Hemker KJ. , Eberl C. , Ma K. , Schoenung JM. , Funk M. :High-temperature mechanical behavior of end-of-life cryomilled NiCrAlY bond coat materials 42 2011 ), S. 2233-2241 ISSN: 1073-5623 10.1007/s11661-011-0659-2 Göken M. , Höppel HW. :Fatigue behaviour in nanostructured metals Elsevier Ltd. 2011 ISBN: 9781845696702 10.1533/9780857091123.3.507 Göken M. , Höppel HW. :Tailoring nanostructured, graded, and particle-reinforced Al laminates by accumulative roll bonding Advanced Materials 23 2011 ), S. 2663-2668 ISSN: 0935-9648 10.1002/adma.201100407 Göken M. , Köysal O. :Effect of frequency on dielectric properties of liquid crystal doped with side-chain liquid crystalline polymer Materials Chemistry and Physics 129 2011 ), S. 1142-1145 ISSN: 0254-0584 10.1016/j.matchemphys.2011.05.076 Hausöl T. , Höppel HW. , Göken M. :Microstructure and mechanical properties of accumulative roll bonded AA6014/AA5754 aluminium laminates Materials Science Forum 667-669 2011 ), S. 217-222 ISSN: 0255-5476 10.4028/www.scientific.net/MSF.667-669.217 Heckl A. , Neumeier S. , Cenanovic S. , Göken M. , Singer R. :Reasons for the enhanced phase stability of Ru-containing nickel-based superalloys Acta Materialia 59 2011 ), S. 6563-6573 ISSN: 1359-6454 10.1016/j.actamat.2011.07.002 Heckl A. , Neumeier S. , Göken M. , Singer R. :The effect of Re and Ru on γ/γ′ microstructure, γ-solid solution strengthening and creep strength in nickel-base superalloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 2011 ), S. 3435-3444 ISSN: 0921-5093 10.1016/j.msea.2011.01.023 Höppel HW. , Göken M. , May L. , Prell M. :Influence of grain size and precipitation state on the fatigue lives and deformation mechanisms of CP aluminium and AA6082 in the VHCF-regime 33 2011 ), S. 10-18 ISSN: 0142-1123 10.1016/j.ijfatigue.2010.04.013 Höppel HW. , Kriebel F. , Lapovok R. , Boehner A. , Göken M. :Influence of backpressure during ECAP on the monotonic and cyclic deformation behavior of AA5754 and Cu99.5 13 2011 ), S. 269-274 ISSN: 1438-1656 10.1002/adem.201000269 Jennett NM. , Göken M. , Durst K. :Nano-mechanical testing in materials research and development Philosophical Magazine 91 2011 ), S. 1035-1036 ISSN: 0031-8086 10.1080/14786435.2011.561524 Klein L. , Bauer A. , Neumeier S. , Göken M. , Virtanen S. :High temperature oxidation of γ/γ′-strengthened Co-base superalloys Corrosion Science 53 2011 ), S. 2027-2034 ISSN: 0010-938X 10.1016/j.corsci.2011.02.033 Klein L. , Bauer A. , Neumeier S. , Göken M. , Virtanen S. :High temperature oxidation of γ/γ′-strengthened Co-base superalloys Corrosion Science 53 2011 ), S. 2027-2034 ISSN: 0010-938X 10.1016/j.corsci.2011.02.033 Korn M. , Lapovok R. , Böhner A. , Höppel HW. , Mughrabi H. :Bimodal grain size distributions in UFG materials produced by SPD - Their evolution and effect on the fatigue and monotonic strength properties Kovove Materialy-Metallic Materials 49 2011 ), S. 51-63 ISSN: 0023-432X 10.4149/km-2011-1-51 Korte S. , Barnard JS. , Stearn RJ. , Clegg WJ. :Deformation of silicon - Insights from microcompression testing at 25-500 °c International Journal of Plasticity 27 2011 ), S. 1853-1866 ISSN: 0749-6419 10.1016/j.ijplas.2011.05.009 Korte S. , Ritter M. , Jiao C. , Midgley PA. , Clegg WJ. :Three-dimensional electron backscattered diffraction analysis of deformation in MgO micropillars Acta Materialia 59 2011 ), S. 7241-7254 ISSN: 1359-6454 10.1016/j.actamat.2011.08.022 Li J. , Sarkar S. , Cox WT. , Lenosky TJ. , Bitzek E. , Wang Y. :Diffusive molecular dynamics and its application to nanoindentation and sintering Physical Review B 84 2011 )ISSN: 0163-1829 10.1103/PhysRevB.84.054103 Lodes M. , Hartmaier A. , Göken M. , Durst K. :Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations Acta Materialia 59 2011 ), S. 4264-4273 ISSN: 1359-6454 10.1016/j.actamat.2011.03.050 Maier V. , Durst K. , Müller J. , Backes B. , Höppel HW. , Göken M. :Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al Journal of Materials Research 26 2011 ), S. 1421-1430 ISSN: 0884-2914 10.1557/jmr.2011.156 Mekala SR. , Eisenlohr P. , Blum W. :Control of dynamic recovery and strength by subgrain boundaries - Insights from stress-change tests on CaF2 single crystals Philosophical Magazine 91 2011 ), S. 908-931 ISSN: 0031-8086 10.1080/14786435.2010.535324 Merle B. , Göken M. :Fracture toughness of silicon nitride thin films of different thicknesses as measured by bulge tests Acta Materialia 59 2011 ), S. 1772-1779 ISSN: 1359-6454 10.1016/j.actamat.2010.11.043 Meszaros R. , Wild M. , Merle B. , Wondraczek L. :Flexural strength of PVD coated float glass for architectural applications Glass Technology-European Journal of Glass Science and Technology Part A 52 2011 ), S. 190-196 ISSN: 1753-3546 Minshull JP. , Neumeier S. , Tucker MG. , Stone HJ. :A1-L1(2) structures in the Al-Co-Ni-Ti quaternary phase system 10.4028/www.scientific.net/AMR.278.399 Ndlovu S. , Durst K. , Göken M. :Deformation of WC-Co Hardmetals During Scratch Testing Wiley-VCH 2011 ISBN: 9783527323661 10.1002/9783527628513.ch20 Neumeier S, Ang J, Hobbs RA, Rae CMF, Stone HJ:Lattice misfit of high refractory ruthenium containing nickel-base superalloys Advanced Materials Research 278 2011 ), S. 60-+ ISSN: 1022-6680 10.4028/www.scientific.net/AMR.278.60
Neumeier S. , Dinkel M. , Pyczak F. , Göken M. :Nanoindentation and XRD investigations of single crystalline Ni-Ge brazed nickel-base superalloys PWA 1483 and René N5 Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 2011 ), S. 815-822 ISSN: 0921-5093 10.1016/j.msea.2010.09.065 Neumeier S. , Pyczaky F. , Göken M. :Influence of rhenium and ruthenium on the local mechanical properties of the c and c0 phases in nickel-base superalloys Philosophical Magazine 91 2011 ), S. 4187-4199 ISSN: 0031-8086 10.1080/14786435.2011.607139 Pedimonte J. , Travitzky N. , Korn M. , Kriegelstein S. , Greil P. :Surface modification of an alumina-based bioceramic for cement application Advanced Engineering Materials 13 2011 )ISSN: 1438-1656 10.1002/adem.201180004 Pfeiffer C. , Affeldt E. , Göken M. :Miniaturized bend tests on partially stabilized EB-PVD ZrO2 thermal barrier coatings Surface & Coatings Technology 205 2011 ), S. 3245-3250 ISSN: 0257-8972 10.1016/j.surfcoat.2010.11.047 Pfeiffer C. , Affeldt E. , Göken M. :Miniaturized bend tests on partially stabilized EB-PVD ZrO2 thermal barrier coatings Surface & Coatings Technology 205 2011 ), S. 3245-3250 ISSN: 0257-8972 10.1016/j.surfcoat.2010.11.047 Rausch MH. , Durst K. , Göken M. , Jakobs PJ. , Leipertz A. , Fröba AP. :Studies on the origin of dropwise condensation of steam on ion implanted metallic surfaces [Untersuchungen zur Ursache der Tropfenkondensation von Wasserdampf an ionenimplantierten Metalloberflächen] Chemie Ingenieur Technik 83 2011 ), S. 545-551 ISSN: 0009-286X 10.1002/cite.201000182 Ahmed F., Bayerlein K., Rosiwal S., Göken M., Durst K.:Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling Acta Materialia 59 2011 ), S. 5422-5433 ISSN: 1359-6454 10.1016/j.actamat.2011.05.015
Schmidt C.W., Knödler P., Höppel H.W., Göken M.:Particle based alloying by accumulative roll bonding in the system Al-Cu Metals 1 2011 ), S. 65-78 ISSN: 2075-4701 10.3390/met1010065
Schmidt C. , Höppel HW. , Göken M. :Maßgeschneiderte partikelverstärkte Verbundwerkstoffe und Werkstoffverbunde hergestellt durch den akkumulativen Walzprozess (ARB) 18. Symposium Verbundwerkstoffe In: Tagungsband zum 18. Symposium Verbundwerkstoffe 2011 Schmidt C. , Knieke C. , Maier V. , Höppel HW. , Peukert W. , Göken M. :Accelerated grain refinement during accumulative roll bonding by nanoparticle reinforcement Scripta Materialia 64 2011 ), S. 245--248 ISSN: 1359-6462 10.1016/j.scriptamat.2010.10.013 Schmidt C. , Knieke C. , Maier V. , Höppel HW. , Peukert W. , Göken M. :Influence of Nanoparticle Reinforcement on the Mechanical Properties of Ultrafine-Grained Aluminium Produced by ARB Materials Science Forum 667-669 2011 ), S. 725--730 ISSN: 0255-5476 10.4028/www.scientific.net/MSF.667-669.725 Schneibel J.H., Heilmaier M., Blum W., Hasemann G., Shanmugasundaram T.:Temperature dependence of the strength of fine- and ultrafine-grained materials Acta Materialia 59 2011 ), S. 1300-1308 ISSN: 1359-6454 10.1016/j.actamat.2010.10.062
Schwarz W. , Schwub S. , Quering K. , Wiedmann D. , Höppel HW. , Göken M. :Life prediction of thermally highly loaded components: Modelling the damage process of a rocket combustion chamber hot wall CEAS Space Journal 1 2011 ), S. 83-97 ISSN: 1868-2502 10.1007/s12567-011-0007-9 Schaufler J, Yang G, Durst K, Spiecker E, Goken M:Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems Surface & Coatings Technology 205 2011 ), S. 3429-3433 ISSN: 0257-8972 10.1016/j.surfcoat.2010.12.005
Wolff F. , Zirkel L. , Sarah B. , Jakob M. , Verena M. , Nachtrab F. , Ceron Nicolat B. , Fey T. , Münstädt H. :Using Supercritical Carbon Dioxide for Physical Foaming of Advanced Polymer Materials International Polymer Processing 26 2011 ), S. 437-443 ISSN: 0930-777X 10.3139/217.2469 Zirkel L. , Maier V. , Durst K. , Münstedt H. :Compression moduli of foamed films of fluorinated ethylene propylene copolymers determined by nanoindentation Polymer Testing 30 2011 ), S. 286-293 ISSN: 0142-9418 10.1016/j.polymertesting.2011.01.005
2010
Amberger D. , Eisenlohr P. , Göken M. :Influence of microstructure on creep strength of MRI 230D Mg alloy Journal of Physics : Conference Series 240 2010 )ISSN: 1742-6588 10.1088/1742-6596/240/1/012068 Bauer A. , Neumeier S. , Pyczak F. , Göken M. :Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants Scripta Materialia 63 2010 ), S. 1197-1200 ISSN: 1359-6462 10.1016/j.scriptamat.2010.08.036 Blum W. , Eisenlohr P. :A simple dislocation model of the influence of high-angle boundaries on the deformation behavior of ultrafine-grained materials Journal of Physics : Conference Series 240 2010 )ISSN: 1742-6588 10.1088/1742-6596/240/1/012136 Brandt B. , Durst K. , Belli R. , Göken M. , Lohbauer U. :Fracture toughness of GIC—A mechanistic approach on the nanoscale Dental Materials 26 2010 ), S. e32 ISSN: 0109-5641 10.1016/j.dental.2010.08.076 Brandt B. , Lohbauer U. , Göken M. , Durst K. :The influence of particle size on the mechanical properties of dental glass ionomer cements Advanced Engineering Materials 12 2010 ), S. B684-B689 ISSN: 1438-1656 10.1002/adem.201080067 Brandt B. , Zollfrank C. , Franke O. , Fromm J. , Göken M. , Durst K. :Micromechanics and ultrastructure of pyrolysed softwood cell walls Acta Biomaterialia 6 2010 ), S. 4345-4351 ISSN: 1742-7061 10.1016/j.actbio.2010.05.026 Brunner J. , May J. , Höppel HW. , Göken M. , Virtanen S. :Localized corrosion of ultrafine-grained Al-Mg model alloys Electrochimica Acta 55 2010 ), S. 1966-1970 ISSN: 0013-4686 10.1016/j.electacta.2009.11.016 Cheng Y. , Bitzek E. , Weygand D. , Gumbsch P. :Atomistic simulation of dislocation-void interactions under cyclic loading Modelling and Simulation in Materials Science and Engineering 18 2010 )ISSN: 0965-0393 10.1088/0965-0393/18/2/025006 Durst K., Hofmann S., Backes B., Mueller J., Göken M.:Microimprinting of nanocrystalline metals - Influence of microstructure and work hardening Journal of Materials Processing Technology 210 2010 ), S. 1787-1793 ISSN: 0924-0136 10.1016/j.jmatprotec.2010.06.010
Göken M. , Bauer A. , Pyczak F. , Neumeier S. :Microstructure and creep strength of different γ/γ′- strengthened Co-base superalloy variants 63 2010 ), S. 1197-1200 ISSN: 1359-6462 10.1016/j.scriptamat.2010.08.036 Hausöl T. , Höppel HW. , Göken M. :Microstructure and mechanical properties of accumulative roll bonded aluminium alloy AA5754 Journal of Physics: Conference Series 240 2010 ), Art.Nr.: 012128 ISSN: 1742-6588 10.1088/1742-6596/240/1/012128 Hausöl T. , Höppel HW. , Göken M. :Tailoring materials properties of UFG aluminium alloys by accumulative roll bonded sandwich-like sheets Journal of Materials Science 45 2010 ), S. 4733-4738 ISSN: 0022-2461 10.1007/s10853-010-4678-y Hausöl T. , Maier V. , Schmidt C. , Winkler M. , Höppel HW. , Göken M. :Tailoring materials properties by accumulative roll bonding Advanced Engineering Materials 12 2010 ), S. 740-746 ISSN: 1438-1656 10.1002/adem.201000044 Heckl A. , Rettig R. , Cenanovic S. , Göken M. , Singer R. :Investigation of the final stages of solidification and eutectic phase formation in Re and Ru containing nickel-base superalloys Journal of Crystal Growth 312 2010 ), S. 2137-2144 ISSN: 0022-0248 10.1016/j.jcrysgro.2010.03.041 Höppel HW. , Korn M. , Lapovok R. , Mughrabi H. :Bimodal grain size distributions in UFG materials produced by SPD: Their evolution and effect on mechanical properties 10.1088/1742-6596/240/1/012147 Höppel HW. , Prell M. , May L. , Göken M. :Influence of grain size and precipitates on the fatigue lives and deformation mechanisms in the VHCF-regime Procedia Engineering 2 2010 ), S. 1025-1034 ISSN: 1877-7058 10.1016/j.proeng.2010.03.111 Jang YS. , Jank M. , Maier V. , Durst K. , Travitzky N. , Zollfrank C. :SiC ceramic micropatterns from polycarbosilanes Journal of the European Ceramic Society 30 2010 ), S. 2773-2779 ISSN: 0955-2219 10.1016/j.jeurceramsoc.2010.05.019 Maier V. , Höppel HW. , Göken M. :Nanomechanical behaviour of Al-Ti layered composites produced by accumulative roll bonding Journal of Physics: Conference Series 240 2010 ), Art.Nr.: 012108 ISSN: 1742-6588 10.1088/1742-6596/240/1/012108 Mompiou F. , Legros M. , Caillard D. , Mughrabi H. :In situ TEM observations of reverse dislocation motion upon unloading of tensile-deformed UFG aluminium Journal of Physics : Conference Series 240 2010 )ISSN: 1742-6588 10.1088/1742-6596/240/1/012137 Mughrabi H. :Fatigue, an everlasting materials problem - Still en vogue Procedia Engineering 2 2010 ), S. 3-26 ISSN: 1877-7058 10.1016/j.proeng.2010.03.003 Mughrabi H. , Höppel HW. :Cyclic deformation and fatigue properties of very fine-grained metals and alloys International Journal of Fatigue 32 2010 ), S. 1413-1427 ISSN: 0142-1123 10.1016/j.ijfatigue.2009.10.007 Negahdari Z. , Willert-Porada M. , Pfeiffer C. :Mechanical properties of dense to porous alumina/lanthanum hexaaluminate composite ceramics Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 527 2010 ), S. 3005-3009 ISSN: 0921-5093 10.1016/j.msea.2010.01.050 Nikulina E. , Durst K. , Göken M. , Voelkl R. , Glatzel U. :Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission electron microscopy and nanoindentation International Journal of Materials Research 101 2010 ), S. 585-588 ISSN: 1862-5282 10.3139/146.110316 Prechtel M. , Ronda PL. , Janisch R. , Hartmaier A. , Leugering G. , Steinmann P. , Stingl M. :Simulation of fracture in heterogeneous elastic materials with cohesive zone models International Journal of Fracture 2010 )ISSN: 0376-9429 10.1007/s10704-010-9552-z Pyczak F. , Neumeier S. , Göken M. :Temperature dependence of element partitioning in rhenium and ruthenium bearing nickel-base superalloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 527 2010 ), S. 7939-7943 ISSN: 0921-5093 10.1016/j.msea.2010.08.091 Rachbauer R. , Massl S. , Stergar E. , Felfer P. , Mayrhofer PH. :Atom probe specimen preparation and 3D interfacial study of Ti-Al-N thin films Surface & Coatings Technology 204 2010 ), S. 1811-1816 ISSN: 0257-8972 10.1016/j.surfcoat.2009.11.020 Scharnweber J. , Skrotzki W. , Oertel CG. , Brokmeier HG. , Höppel HW. , Topic I. , Jaschinski J. :Texture, microstructure and mechanical properties of ultrafine grained aluminum produced by accumulative roll bonding Advanced Engineering Materials 12 2010 ), S. 989-994 ISSN: 1438-1656 10.1002/adem.201000067 Skrotzki W. , Scharnweber J. , Oertel C-. , Höppel HW. , Topic I. , Brokmeier H-. , Jaschinski J. :Plastic anisotropy of ultrafine grained Al alloy AA6016 produced by accumulative roll bonding Solid State Phenomena 160 2010 ), S. 171-176 ISSN: 1012-0394 10.4028/www.scientific.net/SSP.160.171 Vevecka-Priftaj A. , Höppel HW. , Göken M. :Deformation behaviour of nanocrystalline al alloy, processed by severe plastic deformation 7th International Conference of the Balkan Physical Union (Alexandroupolis 10.1063/1.3322399 Weidner A. , Amberger D. , Pyczak F. , Schoenbauer B. , Stanzl-Tschegg S. , Mughrabi H. :Fatigue damage in copper polycrystals subjected to ultrahigh-cycle fatigue below the PSB threshold International Journal of Fatigue 32 2010 ), S. 872-878 ISSN: 0142-1123 10.1016/j.ijfatigue.2009.04.004 Zhu YT. , Mathaudhu SN. , Göken M. , Langdon TG. , Lowe TC. , Semiatin SL. , Tsuji N. , Zhao YH. :Preface to the special issue on ultrafine grained materials Journal of Materials Science 45 2010 ), S. 4543-4544 ISSN: 0022-2461 10.1007/s10853-010-4709-8
2009
Ahmed F. , Durst K. , Rosiwal S. , Fandrey J. , Schaufler J. , Göken M. :In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy Surface & Coatings Technology 204 2009 ), S. 1022-1025 ISSN: 0257-8972 10.1016/j.surfcoat.2009.04.030 Amberger D. , Eisenlohr P. , Göken M. :Microstructural evolution during creep of Ca-containing AZ91 Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 2009 ), S. 398-402 ISSN: 0921-5093 10.1016/j.msea.2008.04.115 Armstrong P. , Knieke C. , Mackovic M. , Frank G. , Hartmaier A. , Göken M. , Peukert W. , Mackovic M. :Microstructural evolution during deformation of tin dioxide nanoparticles in a comminution process Acta Materialia 57 2009 ), S. 3060-3071 ISSN: 1359-6454 10.1016/j.actamat.2009.02.049 Backes B. , Durst K. , Amberger D. , Göken M. :Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 40 2009 ), S. 257-261 ISSN: 1073-5623 10.1007/s11661-008-9720-1 Backes B. , Huang YY. , Göken M. , Durst K. :The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism-based strain gradient plasticity theory Journal of Materials Research 24 2009 ), S. 1197-1207 ISSN: 0884-2914 10.1557/jmr.2009.0123 Blum W. :Role of boundaries in control of deformation rate and strength of crystalline materials International Conference Recent Developments in the Processing and Applications of Structural Metals and Alloys (ITA 22. Juni 2008 - 25. Juni 2008 )In: Materials Science Forum 2009 10.4028/www.scientific.net/msf.604-605.391 Blum W. :Role of boundaries in control of deformation rate and strength of crystalline materials Materials Science Forum 604-605 2009 ), S. 391-401 ISSN: 0255-5476 10.4028/3-908453-09-7.391 Blum W. , Eisenlohr P. :Dislocation mechanics of creep Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 2009 ), S. 7-13 ISSN: 0921-5093 10.1016/j.msea.2008.04.110 Blum W. , Eisenlohr P. , Sklenička V. :Creep Behavior of Bulk Nanostructured Materials - Time-Dependent Deformation and Deformation Kinetics In: Michael J. Zehetbauer, Yuntian Theodore Zhu (Hrsg.): Bulk Nanostructured Materials Weinheim Wiley-VCH Verlag 2009 , S. 519-537 ISBN: 9783527315246 10.1002/9783527626892.ch24 Blum W. , Li Y. , Durst K. :Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures Acta Materialia 57 2009 ), S. 5207-5217 ISSN: 1359-6454 10.1016/j.actamat.2009.07.030 Blum W. , Zeng X. :A simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity Acta Materialia 57 2009 ), S. 1966-1974 ISSN: 1359-6454 10.1016/j.actamat.2008.12.041 Boehner A. , Janisch R. , Hartmaier A. :Ab initio investigation of diamond coatings on steel Scripta Materialia 60 2009 ), S. 504-507 ISSN: 1359-6462 10.1016/j.scriptamat.2008.11.042 Chilukuru H. , Durst K. , Wadekar S. , Schwienheer M. , Scholz A. , Berger C. , Mayer KH. , Blum W. :Coarsening of precipitates and degradation of creep resistance in tempered martensite steels Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 2009 ), S. 81-87 ISSN: 0921-5093 10.1016/j.msea.2008.04.088 Das J. , Pauly S. , Bostroem M. , Durst K. , Göken M. , Eckert J. :Designing bulk metallic glass and glass matrix composites in martensitic alloys Journal of Alloys and Compounds 483 2009 ), S. 97-101 ISSN: 0925-8388 10.1016/j.jallcom.2008.08.139 Eisenlohr P. , Blum W. , Milicka K. :Dislocation glide velocity in creep of Mg alloys derived from dip tests Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 2009 ), S. 393-397 ISSN: 0921-5093 10.1016/j.msea.2008.04.120 Franke O. , Durst K. , Göken M. :Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples Journal of Materials Research 24 2009 ), S. 1127-1134 ISSN: 0884-2914 10.1557/jmr.2009.0135 Gebhard S. , Pyczak F. , Göken M. :Microstructural and micromechanical characterisation of TiAl alloys using atomic force microscopy and nanoindentation Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 523 2009 ), S. 235-241 ISSN: 0921-5093 10.1016/j.msea.2009.05.068 Götz-Votteler K. , Herbst T. , Bergenholtz H. :Preface Zeitschrift für Anglistik und Amerikanistik 2009 ), S. 215-218 ISSN: 0044-2305 Höppel HW. , Mughrabi H. , Vinogradov A. :Fatigue Properties of Bulk Nanostructured Materials John Wiley and Sons 2009 ISBN: 9783527315246 10.1002/9783527626892.ch22 Kiener D. , Durst K. , Rester M. , Minor AM. :Revealing deformation mechanisms with nanoindentation JOM Journal of the Minerals, Metals and Materials Society 61 2009 ), S. 14-23 ISSN: 1047-4838 10.1007/s11837-009-0036-4 Reichstein S., Kraft S., Mughrabi H.:Sequence of distinct microyielding stages of the monocrystalline nickel-base superalloy CMSX-6 at high temperatures International Journal of Materials Research 100 2009 ), S. 494-499 ISSN: 1862-5282 10.3139/146.110061
Kumar P. , Kassner ME. , Blum W. , Eisenlohr P. , Langdon TG. :New observations on high-temperature creep at very low stresses Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 2009 ), S. 20-24 ISSN: 0921-5093 10.1016/j.msea.2008.04.094 Mughrabi H. :Cyclic slip irreversibilities and the evolution of fatigue damage Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science 40 2009 ), S. 431-453 ISSN: 1073-5615 10.1007/s11663-009-9240-4 Mughrabi H. :Microstructural aspects of high temperature deformation of monocrystalline nickel base superalloys: Some open problems Journal of Materials Science & Technology 25 2009 ), S. 191-204 ISSN: 1005-0302 10.1179/174328408X361436 Pyczak F. , Neumeier S. , Göken M. :Influence of lattice misfit on the internal stress and strain states before and after creep investigated in nickel-base superalloys containing rhenium and ruthenium Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 2009 ), S. 295-300 ISSN: 0921-5093 10.1016/j.msea.2008.08.052 Rettig R. , Heckl A. , Neumeier S. , Pyczak F. , Göken M. , Singer R. :Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys Defect and Diffusion Forum 289-292 2009 ), S. 101-108 ISSN: 1012-0386 10.4028/www.scientific.net/DDF.289-292.101 Sadrabadi P. , Durst K. , Göken M. :Study on the indentation size effect in CaF2: Dislocation structure and hardness Acta Materialia 57 2009 ), S. 1281-1289 ISSN: 1359-6454 10.1016/j.actamat.2008.11.015 Sadrabadi P. , Durst K. , Göken M. :Study on the indentation size effect in CaF2: Dislocation structure and hardness Acta Materialia 57 2009 ), S. 1281-1289 ISSN: 1359-6454 10.1016/j.actamat.2008.11.015 Sadrabadi P. , Durst K. , Göken M. , Blum W. :Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits Philosophical Magazine Letters 89 2009 ), S. 391-398 ISSN: 0950-0839 10.1080/09500830902984554 Sadrabadi P. , Eisenlohr P. , Wehrhan G. , Staeblein J. , Parthier L. , Blum W. :Evolution of dislocation structure and deformation resistance in creep exemplified on single crystals of CaF2 Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 2009 ), S. 46-50 ISSN: 0921-5093 10.1016/j.msea.2008.04.086 Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Raab GI. , Valiev RZ. :Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 2009 ), S. 145-147 ISSN: 0921-5093 10.1016/j.msea.2008.04.082 Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Raab GI. , Valiev RZ. :Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 2009 ), S. 145-147 ISSN: 0921-5093 10.1016/j.msea.2008.04.082 Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Valiev RZ. :Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use International Journal of Fatigue 31 2009 ), S. 322-331 ISSN: 0142-1123 10.1016/j.ijfatigue.2008.08.007 Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Valiev RZ. :Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use International Journal of Fatigue 31 2009 ), S. 322-331 ISSN: 0142-1123 10.1016/j.ijfatigue.2008.08.007 Saitova LR. , Höppel HW. , Göken M. , Semenova IP. , Valiev RZ. :Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use International Journal of Fatigue 31 2009 ), S. 322-331 ISSN: 0142-1123 10.1016/j.ijfatigue.2008.08.007 Schaufler J. , Durst K. , Massler O. , Göken M. :In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading Thin Solid Films 517 2009 ), S. 1681-1685 ISSN: 0040-6090 10.1016/j.tsf.2008.09.104 Stockmeier M. , Müller R. , Sakwe A. , Wellmann P. , Magerl A. :On the lattice parameters of silicon carbide Journal of Applied Physics 105 2009 ), Art.Nr.: 033511 ISSN: 0021-8979 10.1063/1.3074301 Topic I. , Höppel HW. , Göken M. :Friction stir welding of accumulative roll-bonded commercial-purity aluminium AA1050 and aluminium alloy AA6016 Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 2009 ), S. 163-166 ISSN: 0921-5093 10.1016/j.msea.2007.12.057 Wang Y. , Mayer K-. , Scholz A. , Berger C. , Chilukuru H. , Durst K. , Blum W. :Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650 °C Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 2009 ), S. 180-184 ISSN: 0921-5093 10.1016/j.msea.2008.04.116 Ziegenhain G. , Hartmaier A. , Urbassek HM. :Pair vs many-body potentials: Influence on elastic and plastic behavior in nanoindentation of fcc metals Journal of the Mechanics and Physics of Solids 57 2009 ), S. 1514-1526 ISSN: 0022-5096 10.1016/j.jmps.2009.05.011
2008
Blum W. :Mechanisms of creep deformation in steel In: Fujio Abe, Torsten-Ulf Kern, R. Viswanathan (Hrsg.): Creep-Resistant Steels Woodhead Publishing 2008 (Woodhead Publishing Series in Metals and Surface Engineering)ISBN: 9781845691783 10.1533/9781845694012.2.365 Broedling NC. , Hartmaier A. , Buehler MJ. , Gao H. :The strength limit in a bio-inspired metallic nanocomposite Journal of the Mechanics and Physics of Solids 56 2008 ), S. 1086-1104 ISSN: 0022-5096 10.1016/j.jmps.2007.06.006 Broedling NC. , Hartmaier A. , Gao H. :Fracture toughness of layered structures: Embrittlement due to confinement of plasticity Engineering Fracture Mechanics 75 2008 ), S. 3743-3754 ISSN: 0013-7944 10.1016/j.engfracmech.2007.10.014 Cabibbo M. , Blum W. , Evangelista E. , Kassner ME. , Meyers MA. :Transmission electron microscopy study of strain-induced low- and high-angle boundary development in equal-channel angular-pressed commercially pure aluminum Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 39 2008 ), S. 181-189 ISSN: 1073-5623 10.1007/s11661-007-9350-z Demakov SL. , Elkina OA. , Illarionov AG. , Karabanalov MS. , Popov AA. , Semenova IP. , Saitova LR. , Shchetnikov NV. :Effect of rolling-assisted deformation on the formation of an ultrafine-grained structure in a two-phase titanium alloy subjected to severe plastic deformation Physics of Metals and Metallography 105 2008 ), S. 602-609 ISSN: 0031-918X 10.1134/S0031918X08060112 Dinkel M. , Heinz P. , Pyczak F. , Volek A. , Ott M. , Affeldt E. , Vossberg A. , Göken M. , Singer R. :New boron and silicon free single crystal-diffusion brazing alloys 11th International Symposium on Superalloys, SUPERALLOYS 2008 (Seven Springs 14. September 2008 - 18. September 2008 )In: R.C. Reed, K.A. Kenneth, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, S.A. Woodard (Hrsg.): Superalloys 2008: Proceedings of the 11th Intenational Symposium of Superalloys , Warrendale 2008 10.7449/2008/Superalloys_2008_211_220 Dinkel M. , Pyczak F. , May J. , Höppel HW. , Göken M. :XRD profile analysis characterization of ultrafine grained Al-Mg alloys Journal of Materials Science 43 2008 ), S. 7481-7487 ISSN: 0022-2461 10.1007/s10853-008-2859-8 Durst K. , Göken M. , Pharr GM. :Indentation size effect in spherical and pyramidal indentations Journal of Physics D-Applied Physics 41 2008 )ISSN: 0022-3727 10.1088/0022-3727/41/7/074005 Eisenlohr P. , Sadrabadi P. , Blum W. :Quantifying the distributions of dislocation spacings and cell sizes Journal of Materials Science 43 2008 ), S. 2700-2707 ISSN: 0022-2461 10.1007/s10853-008-2467-7 Franke O. , Göken M. , Hodge AM. :The nanoindentation of soft tissue: Current and developing approaches JOM Journal of the Minerals, Metals and Materials Society 60 2008 ), S. 49-53 ISSN: 1047-4838 10.1007/s11837-008-0071-6 Gelse K. , Muehle C. , Franke O. , Park J. , Jehle M. , Durst K. , Göken M. , Hennig F. , Mark K. , Schneider H. :Cell-based resurfacing of large cartilage defects: Long-term evaluation of grafts from autologous transgene-activated periosteal cells in a porcine model of osteoarthritis Arthritis & Rheumatism-Arthritis Care & Research 58 2008 ), S. 475-488 ISSN: 0893-7524 10.1002/art.23124 Heinz P. , Volek A. , Singer R. , Dinkel M. , Pyczak F. , Göken M. , Ott M. , Affeldt E. , Vossberg A. :Diffusion brazing of single crystalline nickel base superalloys using boron free nickel base braze alloys Defect and Diffusion Forum 273-276 2008 ), S. 294-299 ISSN: 1012-0386 Higashida K. , Tanaka M. , Hartmaier A. , Hoshino Y. :Analyzing crack-tip dislocations and their shielding effect on fracture toughness Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 2008 ), S. 13-18 ISSN: 0921-5093 10.1016/j.msea.2006.12.174 Hueller M. , Vlcek J. , Dinkel M. , Höppel HW. , Göken M. :Hardening and thermal stability of nanocrystalline AlMg4.8 powder Philosophical Magazine 88 2008 ), S. 1209-1226 ISSN: 0031-8086 10.1080/14786430802089854 Höppel HW. , May J. , Göken M. :Cyclic deformation behaviour and fatigue lives of ultrafine-grained aluminium-magnesium alloys 4th International Conference on Nanomaterials by Severe Plastic Deformation (, 18. August 2008 - 22. August 2008 )In: Materials Science Forum 2008 10.4028/www.scientific.net/msf.584-586.840 Janisch R. , Elsässer C. :Growth and mechanical properties of a MoC precipitate at a Mo grain boundary: An ab initio density functional theory study Physical Review B - Condensed Matter and Materials Physics 77 2008 ), Art.Nr.: 094118 ISSN: 1550-235X 10.1103/PhysRevB.77.094118 Li Y.J., Kapoor R., Wang J.T., Blum W.:Structural stability of ultrafine-grained copper Scripta Materialia 58 2008 ), S. 53-56 ISSN: 1359-6462 10.1016/j.scriptamat.2007.08.033
Li Y. , Zeng X. , Blum W. :On the elevated-temperature deformation behavior of polycrystalline Cu subjected to predeformation by multiple compression Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 2008 ), S. 547-550 ISSN: 0921-5093 10.1016/j.msea.2006.09.133 May J. , Amberger D. , Dinkel M. , Höppel HW. , Göken M. :Monotonic and cyclic deformation behaviour of ultrafine-grained aluminium Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 2008 ), S. 481-484 ISSN: 0921-5093 10.1016/j.msea.2006.12.177 Mughrabi H. , Höppel HW. :Assessment of fatigue damage in heterogeneous materials by application of a novel compliancen technique Solid Mechanics and Its Applications 152 2008 ), S. 327-343 ISSN: 0925-0042 10.1007/978-1-4020-8520-8-12 Mughrabi H. , Pschenitzka F. :Stresses to bow edge dislocation segments out of di-/multipolar edge dislocation bundles Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 2008 ), S. 469-473 ISSN: 0921-5093 10.1016/j.msea.2006.09.185 Neumeier S. , Pyczak F. , Göken M. :The influence of ruthenium and rhenium on the local properties of the γ- and γ′-phase in nickel-base superalloys and their consequences for alloy behavior 11th International Symposium on Superalloys, Superalloys 2008 (Champion, PA In: Proceedings of the International Symposium on Superalloys 2008 https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=60349117530∨igin=inward Nützel R. , Affeldt E. , Göken M. :Damage evolution during thermo-mechanical fatigue of a coated monocrystalline nickel-base superalloy International Journal of Fatigue 30 2008 ), S. 313-317 ISSN: 0142-1123 10.1016/j.ijfatigue.2007.01.045 Prell M. , Xu C. , Langdon TG. :The evolution of homogeneity on longitudinal sections during processing by ECAP Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 480 2008 ), S. 449-455 ISSN: 0921-5093 10.1016/j.msea.2007.08.011 Saitova L. , Semenova I. , Höppel HW. , Valiev R. , Göken M. :Enhanced superplastic deformation behavior of ultrafine-grained Ti-6Al-4V alloy Materialwissenschaft und Werkstofftechnik 39 2008 ), S. 367-370 ISSN: 0933-5137 10.1002/mawe.200800308 Saitova LR. , Höppel HW. , Göken M. , Kilmametov AR. , Semenova IP. , Valiev RZ. :Cycling of ultrafine-grained Ti-6Al-4V ELI alloy: Microstructural changes and enhanced fatigue limit 4th International Conference on Nanomaterials by Severe Plastic Deformation (Goslar 18. August 2008 - 22. August 2008 )10.4028/www.scientific.net/msf.584-586.827 Skrotzki W. , Hünsche I. , Hüttenrauch J. , Oertel CG. , Brokmeier HG. , Höppel HW. , Topic I. :Texture and mechanical anisotropy of ultrafine-grained aluminum alloy AA6016 produced by accumulative roll bonding Texture, Stress, and Microstructure 2008 2008 )ISSN: 1687-5397 10.1155/2008/328754 Tabachnikova ED. , Bengus VZ. , Podolskiy AV. , Smirnov SN. , Csach K. , Miskuf J. , Saitova LR. , Semenova IP. , Valiev RZ. :Microstructure features of failure and mechanical properties of ultra-fine grained Ti-6AL-4V ELI alloy at 300-77 K International Journal of Mechanics and Materials in Design 4 2008 ), S. 189-195 ISSN: 1569-1713 10.1007/s10999-007-9036-0 Tabachnikova ED. , Podolskiy AV. , Bengus VZ. , Smirnov SN. , Csach K. , Miškuf J. , Saitova LR. , Semenova IP. , Valiev RZ. :Microstructural features of failure surfaces and low-temperature mechanical properties of Ti-6Al-4V ELI ultra-fine grained alloy STRENGTH MATER+ 40 2008 ), S. 71-74 ISSN: 0039-2316 10.1007/s11223-008-0019-7 Topic I. , Höppel HW. , Göken M. :Deformation behaviour of accumulative roll bonded and friction stir welded aluminium alloys 4th International Conference on Nanomaterials by Severe Plastic Deformation (DEU 18. August 2008 - 22. August 2008 )In: Materials Science Forum 2008 10.4028/www.scientific.net/msf.584-586.833 Topic I. , Höppel HW. , Göken M. :Influence of rolling direction on strength and ductility of aluminium and aluminium alloys produced by accumulative roll bonding Journal of Materials Science 43 2008 ), S. 7320-7325 ISSN: 0022-2461 10.1007/s10853-008-2754-3 Topic I. , Höppel HW. , Staud D. , Merklein M. , Geiger M. , Göken M. :Formability of accumulative roll bonded aluminum AA1050 and AA6016 investigated using bulge tests Advanced Engineering Materials 10 2008 ), S. 1101-1109 ISSN: 1438-1656 10.1002/adem.200800167 Vevecka-Priftaj A. , Böhner A. , May J. , Höppel HW. , Göken M. :Strain rate sensitivity of ultrafine grained aluminium alloy AA6061 4th International Conference on Nanomaterials by Severe Plastic Deformation (Goslar 18. August 2008 - 22. August 2008 )10.4028/www.scientific.net/msf.584-586.741 Zeng X. , Eisenlohr P. , Blum W. :Modelling the transition from strengthening to softening due to grain boundaries Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 2008 ), S. 95-98 ISSN: 0921-5093 10.1016/j.msea.2006.09.130
2007
Blum W. , Li Y. :Flow stress and creep rate of nanocrystalline Ni Scripta Materialia 57 2007 ), S. 429-431 ISSN: 1359-6462 10.1016/j.scriptamat.2007.04.041 Blum W. , Li Y. , Breutinger F. :Deformation kinetics of coarse-grained and ultrafine-grained commercially pure Ti Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 462 2007 ), S. 275-278 ISSN: 0921-5093 10.1016/j.msea.2006.05.171 Durst K. , Franke O. , Böhner A. , Göken M. :Indentation size effect in Ni-Fe solid solutions Acta Materialia 55 2007 ), S. 6825-6833 ISSN: 1359-6454 10.1016/j.actamat.2007.08.044 Dzivenko DA. , Zerr A. , Schweitzer E. , Göken M. , Boehler R. , Riedel R. :Elastic moduli and hardness of c- Zr2.86 (N0.88 O0.12) 4 having Th3 P4 -type structure Applied Physics Letters 90 2007 ), Art.Nr.: 191910 ISSN: 0003-6951 10.1063/1.2738373 Franke O. , Durst K. , Göken M. :Microstructure and local mechanical properties of Pt-modified nickel aluminides on nickel-base superalloys after thermo-mechanical fatigue Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 467 2007 ), S. 15-23 ISSN: 0921-5093 10.1016/j.msea.2007.02.069 Franke O. , Durst K. , Maier V. , Göken M. , Birkholz T. , Schneider H. , Hennig F. , Gelse K. :Mechanical properties of hyaline and repair cartilage studied by nanoindentation Acta Biomaterialia 3 2007 ), S. 873-881 ISSN: 1742-7061 10.1016/j.actbio.2007.04.005 Gemming S. , Janisch R. , Schreiber M. , Spaldin NA. :Density-functional investigation of the (113) [-110] twin grain boundary in Co-doped anatase Ti O2 and its influence on magnetism in dilute magnetic semiconductors Physical Review B - Condensed Matter and Materials Physics 76 2007 ), Art.Nr.: 045204 ISSN: 1550-235X 10.1103/PhysRevB.76.045204 Hübner P. , Kiessling R. , Biermann H. , Hinkel T. , Jungnickel W. , Kawalla R. , Höppel HW. , May J. :Static and cyclic crack growth behavior of ultrafine-grained Al produced by different severe plastic deformation methods Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 2007 ), S. 1926-1933 ISSN: 1073-5623 10.1007/s11661-007-9297-0 Kassner ME. , Kumar P. , Blum W. :Harper-Dorn creep International Journal of Plasticity 23 2007 ), S. 980-1000 ISSN: 0749-6419 10.1016/j.ijplas.2006.10.006 Li Y. , Müller J. , Höppel HW. , Göken M. , Blum W. :Deformation kinetics of nanocrystalline nickel Acta Materialia 55 2007 ), S. 5708-5717 ISSN: 1359-6454 10.1016/j.actamat.2007.06.036 Maier HJ. , Biallas G. , Eggeler G. , Estrin J. , Hellmig RJ. , Göken M. , Höppel HW. , Gottstein G. , Winning M. :Symposium on ultrafine-grained materials: From basics to applications Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 2007 ), S. 1881 ISSN: 1073-5623 10.1007/s11661-007-9300-9 May J. , Dinkel M. , Amberger D. , Höppel HW. , Göken M. :Mechanical properties, dislocation density and grain structure of ultrafine-grained aluminum and aluminum-magnesium alloys Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 2007 ), S. 1941-1945 ISSN: 1073-5623 10.1007/s11661-007-9110-0 Ndlovu S. , Durst K. , Göken M. :Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing Wear 263 2007 ), S. 1602-1609 ISSN: 0043-1648 10.1016/j.wear.2006.11.044 Ndlovu S. , Durst K. , Höppel HW. , Göken M. :Study on the local damage mechanisms in WC-Co hard metals during scratch testing Materials Research Society Symposium - Proceedings 1049 2007 ), Art.Nr.: 1049-AA05-16 ISSN: 0272-9172 10.1557/PROC-1049-AA05-16 Sakwe A. , Müller R. , Wellmann P. :Erratum to “Optimization of KOH etching parameters for quantitative defect recognition in n- and p-type doped SiC”: [J. Crystal Growth 289 (2006) 520–526] Journal of Crystal Growth 299 2007 ), S. 234-234 ISSN: 0022-0248 10.1016/j.jcrysgro.2006.10.196 Schweitzer E. , Göken M. :In situ bulge testing in an atomic force microscope: Microdeformation experiments of thin film membranes Journal of Materials Research 22 2007 ), S. 2902-2911 ISSN: 0884-2914 10.1557/jmr.2007.0373 Shaw LL. , Larsen JM. , Liaw PK. , Mughrabi H. , Endo M. , Kostorz G. :Preface Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 468-470 2007 ), S. 1 ISSN: 0921-5093 10.1016/j.msea.2007.02.013 Stanzl-Tschegg S. , Mughrabi H. , Schoenbauer B. :Life time and cyclic slip of copper in the VHCF regime International Journal of Fatigue 29 2007 ), S. 2050-2059 ISSN: 0142-1123 10.1016/j.ijfatigue.2007.03.010 Topic I. , Höppel HW. , Göken M. :Deformation behaviour, microstructure and processing of accumulative roll bonded aluminium alloy AA6016 International Journal of Materials Research 98 2007 ), S. 320-324 ISSN: 1862-5282 10.3139/146.101469 Valiev RZ. , Zehetbauer MJ. , Estrin Y. , Höppel HW. , Ivanisenko Y. , Hahn H. , Wilde G. , Roven HJ. , Sauvage X. , Langdon TG. :The innovation potential of bulk nanostructured materials Advanced Engineering Materials 9 2007 ), S. 527-533 ISSN: 1438-1656 10.1002/adem.200700078 Wellmann P. , Hens P. , Sakwe A. , Queren D. , Müller R. , Durst K. , Göken M. :Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth Materials Science Forum 556-557 2007 ), S. 259-262 ISSN: 0255-5476 10.4028/www.scientific.net/MSF.556-557.259
2006
Agamennone R. , Blum W. , Gupta C. , Chakravartty JK. :Evolution of microstructure and deformation resistance in creep of tempered martensitic 9-12%Cr-2%W-5%Co steels Acta Materialia 54 2006 ), S. 3003-3014 ISSN: 1359-6454 10.1016/j.actamat.2006.02.038 Backes B. , Durst K. , Göken M. :Determination of plastic properties of polycrystalline metallic materials by nanoindentation: Experiments and finite element simulations Philosophical Magazine 86 2006 ), S. 5541-5551 ISSN: 1478-6443 10.1080/14786430600735468 Blum W. , Li Y. , Chen J. , Zeng X. , Lu K. :On the Hall-Fetch relation between flow stress and grain size International Journal of Materials Research 97 2006 ), S. 1661-1666 ISSN: 1862-5282 10.3139/146.101398 Broedling NC. , Hartmaier A. , Gao H. :A combined dislocation - Cohesive zone model for fracture in a confined ductile layer International Journal of Fracture 140 2006 ), S. 169-181 ISSN: 0376-9429 10.1007/s10704-005-6025-x Durst K. , Backes B. , Franke O. , Göken M. :Indentation size effect in metallic materials: Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations Acta Materialia 54 2006 ), S. 2547-2555 ISSN: 1359-6454 10.1016/j.actamat.2006.01.036 Han CS. , Hartmaier A. , Gao H. , Huang Y. :Discrete dislocation dynamics simulations of surface induced size effects in plasticity Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 415 2006 ), S. 225-233 ISSN: 0921-5093 10.1016/j.msea.2005.09.075 Hartmaier A. , Brodling N. , Gao H. :Multiscale modeling of fracture and plasticity in layered structures 16th European Conference of Fracture (Alexandroupolis 3. Juli 2006 - 7. Juli 2006 )In: Emmanuel E. Gdoutos (Hrsg.): Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture , Dordrecht 2006 10.1007/1-4020-4972-2_418 Höppel HW. :Mechanical Properties of Ultrafine Grained Metals under Cyclic and Monotonic Loads: An Overview Materials Science Forum 503-504 2006 ), S. 259-266 ISSN: 0255-5476 10.4028/www.scientific.net/MSF.503-504.259 Höppel HW. , Kautz M. , Xu C. , Murashkin M. , Langdon TG. , Valiev RZ. , Mughrabi H. :An overview: Fatigue behaviour of ultrafine-grained metals and alloys International Journal of Fatigue 28 2006 ), S. 1001-1010 ISSN: 0142-1123 10.1016/j.ijfatigue.2005.08.014 Kapoor R. , Li Y. , Wang JT. , Blum W. :Creep transients during stress changes in ultrafine-grained copper Scripta Materialia 54 2006 ), S. 1803-1807 ISSN: 1359-6462 10.1016/j.scriptamat.2006.01.032 May J. , Höppel HW. , Göken M. :Strain Rate Sensitivity of Ultrafine Grained FCC- and BCC-Type Metals Materials Science Forum 503-504 2006 ), S. 781-786 ISSN: 0255-5476 10.4028/www.scientific.net/MSF.503-504.781 Mughrabi H. :Deformation-induced long-range internal stresses and lattice plane misorientations and the role of geometrically necessary dislocations Philosophical Magazine 86 2006 ), S. 4037-4054 ISSN: 1478-6443 10.1080/14786430500509054 Mughrabi H. :Dual role of deformation-induced geometrically necessary dislocations with respect to lattice plane misorientations and/or long-range internal stresses Acta Materialia 54 2006 ), S. 3417-3427 ISSN: 1359-6454 10.1016/j.actamat.2006.03.047 Mughrabi H. :Implications of linear relationships between local and macroscopic flow stresses in the composite model Zeitschrift für Metallkunde 97 2006 ), S. 594-596 ISSN: 0044-3093 10.3139/146.101276 Mughrabi H. :Specific features and mechanisms of fatigue in the ultrahigh-cycle regime International Journal of Fatigue 28 2006 ), S. 1501-1508 ISSN: 0142-1123 10.1016/j.ijfatigue.2005.05.018 Mughrabi H. , Höppel HW. , Kautz M. :Microstructural Aspects of Cyclic Deformation and Fatigue of Ultrafine-Grained Metals In: Yuntian T. Zhu, Viktor Varyukhin (Hrsg.): Nanostructured Materials by High-Pressure Severe Plastic Deformation , Dordrecht 2006 10.1007/1-4020-3923-9_29 Mughrabi H. , Ungár T. :Close up on crystal plasticity Nature Materials 5 2006 ), S. 601-602 ISSN: 1476-1122 10.1038/nmat1706 Mughrabi H. , Ungár T. :Close up on crystal plasticity Nature Materials 5 2006 ), S. 601-602 ISSN: 1476-1122 10.1038/NMAT1706 Müller J. , Durst K. , Amberger D. , Göken M. :Local Investigations of the Mechanical Properties of Ultrafine Grained Metals by Nanoindentations Materials Science Forum 503-504 2006 ), S. 31-36 ISSN: 0255-5476 10.4028/www.scientific.net/MSF.503-504.31 Schwarz KW. , Mughrabi H. :Interaction and passing stress of two threading dislocations of opposite sign in a confined channel Philosophical Magazine Letters 86 2006 ), S. 773-785 ISSN: 0950-0839 10.1080/09500830601026467 Stanzl-Tschegg S. , Mughrabi H. , Schuller R. :Does copper undergo surface roughening during fatigue in the VH regime? 16th European Conference of Fracture (Alexandroupolis 3. Juli 2006 - 7. Juli 2006 )In: Emmanuel E. Gdoutos (Hrsg.): Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture , Dordrecht 2006 10.1007/1-4020-4972-2_559 Topic I. , Sockel HG. , Wellmann P. , Göken M. :The influence of microstructure on the magnetic properties of WC/Co hardmetals Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 423 2006 ), S. 306-312 ISSN: 0921-5093 10.1016/j.msea.2006.02.018
2005
Pyczak F. , Devrient B. , Neuner F. , Mughrabi H. :The influence of different alloying elements on the development of the γ/γ′ microstructure of nickel-base superalloys during high-temperature annealing and deformation Acta Materialia 53 2005 ), S. 3879-3891 ISSN: 1359-6454 10.1016/j.actamat.2005.04.041 Volek A. , Pyczak F. , Singer R. , Mughrabi H. :Partitioning of Re between γ and γ′ phase in nickel-base superalloys Scripta Materialia 52 2005 ), S. 141-145 ISSN: 1359-6462 10.1016/j.scriptamat.2004.09.013 Wolf B. , Göken M. :On the pressure dependence of the indentation modulus International Journal of Materials Research 96 2005 ), S. 1247-1251 ISSN: 1862-5282 10.1515/ijmr-2005-0217
2004
Bürgel R. , Grossmann J. , Lüsebrink O. , Mughrabi H. , Pyczak F. , Singer R. , Volek A. :Development of a new alloy for directional solidification of large industrial gas turbine blades SUPERALLOYS 2004 - Tenth International Symposium on Superalloys (Champion, PA Schweitzer Elmar, Durst Karsten, Amberger Doris , Göken Mathias:The Mechanical Properties in the Vicinity of grain boundaries in ultrafine-grained and Polycrystalline Materials Studied by Nanoindentations Materials Research Society Symposium - Proceedings 821 2004 ), S. P4.91-P 4.9.6 ISSN: 0272-9172
Durst K. , Göken M. :Nanoindentierung Eine Sonde für die lokalen mechanischen Eigenschaften Metallographietagung 2004 (Bochum In: Met. Sonderband 36 , Frankfurt 2004 Durst K. , Göken M. , Franke O. :Nanoindentations as a local probe fort he mechanical properties and alloying influences in nickel-base superalloys and aluminide coatings Superalloys 2004 (Sevenssprings In: Superalloys 2004 , Warrendale 2004 Durst Karsten, Franke Oliver, Höppel Heinz Werner, Affeldt Ernst, Göken Mathias:Mikrostruktur und lokale mechanische Eigenschaften von platinmodifizierten Aluminidschichten auf Nickelbasis-Superlegierungen nach thermomechanischer Ermüdung Metallographietagung 2004 (Bochum In: Prakt. Met. Sonderband 36 , Frankfurt 2004
Ulrich S. , Ziebert C., Stüber M. , Nold E. , Holleck H. , Schweitzer Elmar, Göken Mathias:Correlation between constitution, properties and machining performance of TiN/ZrN multilayers Surface & Coatings Technology 188-189 2004 ), S. 331-337 ISSN: 0257-8972 10.1016/j.surfcoat.2004.08.056
Durst Karsten, Göken Mathias, Verhoff Horst:Finite element study for nanoindentation measurements on two-phase materials Journal of Materials Research 19 2004 ), S. 85-93 ISSN: 0884-2914
Göken M. , Durst K. :Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 387-389 2004 ), S. 312-316 ISSN: 0921-5093 10.1016/j.msea.2004.03.079 Göken Mathias, Magerle R. , Hund M. , Durst Karsten:Nanotomographie metallischer Gefüge Matallographietagung 2004 In: Prakt. Met. Sonderband 35 , Frankfurt 2004
Höppel Heinz Werner, Göken Mathias, Klein Martin:Large chamber scanning electron microscopes: Challenges and Aspects for Materials Science Imaging & Microscopy 2004 ), S. 34-35 ISSN: 1439-4243
Göken M. , Höppel HW. , May J. :Enhanced strength and ductility in ultrafine-grained aluminium produced by accumulative roll bonding (ARB) Advanced Engineering Materials 6 2004 ), S. 781-784 ISSN: 1438-1656 Göken M. , Schweitzer E. :The grain boundary hardness in austenitic stainless steels studied by nanoindentations Zeitschrift für Metallkunde 95 2004 ), S. 492-498 ISSN: 0044-3093 Neuner Frank, Nützel Ralf, Höppel Heinz Werner:Fretting fatigue of low carbon steels in the high cycle fatigue regime MP Materials Testing 46 2004 ), S. 379-383 ISSN: 0025-5300
Höppel Heinz Werner, Kautz Martin, Xu Cheng, Barta-Schreiber Nicole, Langdon Terry G., Mughrabi Hael:Cyclic deformation behaviour and possibilities for enhancing the fatigue properties of ultrafine-grained metals NANOSPD2 (Wien In: Proc. of the Conf. "Nanomaterials by Severe Plastic Deformation NANOSPD2 , Weinheim 2004
Höppel Heinz Werner, Kautz Martin, Mughrabi Hael:Fatigue lives and cyclic deformation behaviour of ultrafine-grained metals and alloys DVM/DFG-Abschlusskolloquium "Lebensdauervorhersage (Berlin In: DVM/DFG-Abschlusskolloquium "Lebensdauervorhersage , Berlin 2004
Höppel HW. , Neuner F. , Nützel R. :Fretting fatigue of low carbon steels in the high cycle fatigue regime LCF 5 (Berlin In: 5th Int. Conf on Low Cycle Fatigue , Berlin 2004 Mughrabi Hael, Höppel Heinz Werner, Kautz Martin:Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation Scripta Materialia 51 2004 ), S. 807-812 ISSN: 1359-6462 10.1016/j.scriptamat.2004.05.012
Neuner F. , Nützel R. , Höppel HW. :Fretting fatigue of carbon steels in the high cycle fatigue regime Materials Testing 46 2004 ), S. 379-383 ISSN: 0025-5300 10.1515/mt-2004-0379
2003
Wöllmer S. , Zaefferer S., Göken Mathias, Glatzel U.:Characterization of phases of aluminized nickel base superalloys Surface & Coatings Technology 167 ( 2003 ), S. 83-96 ISSN: 0257-8972 10.1016/S0257-8972(02)00843-5
Höppel Heinz Werner, Neuner Frank:Untersuchung von mikrostrukturellen Einflussgrößen auf das Reibermüdungsverhalten und auf die Schädigungsmechanismen am Beispiel von Eisenbasislegierungen World of Dynamic Testing, (~ In: 10. Roell Amsler Symposium 2003 2003
Mughrabi H. , Höppel HW. , Kautz M. , Valiev R. :Annealing treatments to enhance thermal and mechanical stability of ultrafine-grained metals produced by severe plastic deformation Zeitschrift für Metallkunde 94 2003 ), S. 1079-1083 ISSN: 0044-3093 10.3139/146.031079
2002
Blum W. , Breutinger F. :New method of determining stress relaxation behavior in creep machines by controlled unloading International Journal of Materials Research 93 2002 ), S. 649-653 ISSN: 1862-5282 10.3139/ijmr-2002-0110 Zeschky Jürgen, Lo J.S.H., Scheffler M., Höppel Heinz Werner, Arnold Michael, Greil Peter:Polysiloxane-derived ceramic foam for the reinforcement of Mg alloy Zeitschrift für Metallkunde 93 2002 ), S. 812-818 ISSN: 0044-3093
Durst Karsten, Göken Mathias, Pharr G.M.:Finite element simulation of spherical indentation in the elastic / plastic transition Zeitschrift für Metallkunde 93 2002 ), S. 857-861 ISSN: 0044-3093
Biermann Horst, Christ Hans-Jürgen, Höppel Heinz Werner:Editorial in special issue of the ocassion of Prof. Mughrabi's 65th Birthday, Haël Mughrabi 65 years Zeitschrift für Metallkunde 93 2002 ), S. 600-601 ISSN: 0044-3093
Höppel Heinz Werner, Valiev R.Z.:On the possibilities to enhance the fatigue properties of ultrafine-grained metals Zeitschrift für Metallkunde 93 2002 ), S. 641-648 ISSN: 0044-3093
Höppel Heinz Werner, Eisenmeier G., Holzwarth B., Mughrabi Hael:Cyclic deformation and fatigue behaviour of the magnesium alloy AZ91: temperature effects and two-step fatigue tests In: Proc. of 8th Int. Fatigue Congress (FATIGUE 2002) , West Midlands, UK 2002
Eisenmeier G., Höppel Heinz Werner, Ding Z.H., Mughrabi Hael:Ermüdungslebensdauer der Magnesiumlegierung AZ 91: Expriment und Modellierung 2. DVM/DFG-Kolloquium Lebensdauervorhersage (Berlin In: Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe 2002
Höppel Heinz Werner, Zhou Z.M., Mughrabi Hael, Valiev R.V.:Microstructural study of the parameters governing coarsening and cyclic softening in fatigued ultrafine-grained copper Philosophical Magazine A 2002 ), S. 1781-1794 ISSN: 0141-8610 10.1080/01418610210131399
Kautz Martin, Höppel Heinz Werner, Zhou Z.M., Mughrabi Hael:Fatigue lives and cyclic deformation behaviour of ultrafine grained materials 2. DVM/DFG-Kolloquium Lebensdauervorhersage (Berlin In: Mechanismenorientierten Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe 2002
Borbely A., Mughrabi Hael, Eisenmeier Gerd, Höppel Heinz Werner:A finite element modelling study of strain localization in the vicinity of near-surface cavities as a cause of subsurface fatigue crack initiation International Journal of Fracture 115 ( 2002 ), S. 227-232 ISSN: 0376-9429 10.1023/A:1016350528652
Ding H.-Z., Mughrabi Hael, Höppel Heinz Werner:A low-cycle fatigue life predication model of ultrafine-grained metals Fatigue & Fracture of Engineering Materials & Structures 25 2002 ), S. 975-984 ISSN: 8756-758X
Eisenmeier G., Höppel Heinz Werner, Ding Z.H., Mughrabi Hael:Ermüdungslebensdauer der Magnesiumlegierung AZ91: Experiment und Modellierung Materialwissenschaft und Werkstofftechnik 2002 ), S. 238-243 ISSN: 0933-5137
2000
Deserno F. :Diplomarbeit: Verformungswiderstand von TiAlV6 bei mittleren Temperaturen 2000 )https://www10.cs.fau.de/publications/theses/2000/Deserno_DA_2000.pdf Pyczak F. , Biermann H. , Mughrabi H. , Volek A. , Singer R. :CBED-Measurement of Residual Internal Strains in the Neighbourhood of TCP-Phases in Ni-Base Superalloys 9th International Symposium on Superalloys, SUPERALLOYS 2000 (Seven Springs 17. September 2000 - 21. September 2000 )In: K. Green, T. M. Pollock, R. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, J.J. Schirra (Hrsg.): Superalloys 2000: Proceedings of the 9th Intenational Symposium of Superalloys 2000